Zur Kurzanzeige

A Comparison Study of Liquid Natural Rubber (LNR) and Liquid Epoxidized Natural Rubber (LENR) as the Toughening Agent for Epoxy

dc.date.accessioned2020-12-22T15:24:11Z
dc.date.available2020-12-22T15:24:11Z
dc.date.issued2013
dc.identifierdoi:10.17170/kobra-202012082433
dc.identifier.urihttp://hdl.handle.net/123456789/12358
dc.language.isoengeng
dc.rightsNamensnennung 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.subjectliquid natural rubbereng
dc.subjectliquid epoxidized natural rubbereng
dc.subjectepoxyeng
dc.subjectrubber-toughened epoxyeng
dc.subjecttoughnesseng
dc.subjectflexural testeng
dc.subjectimpact testeng
dc.subjectscanning electron micrographeng
dc.subjectdynamic mechanical analysiseng
dc.subject.ddc500
dc.subject.ddc600
dc.titleA Comparison Study of Liquid Natural Rubber (LNR) and Liquid Epoxidized Natural Rubber (LENR) as the Toughening Agent for Epoxyeng
dc.typeAufsatz
dcterms.abstractRubber-toughened epoxy resins were prepared using the mechanical stirring method and molded into samples by compression molding. The aim of this study is to modify the brittleness of the epoxy matrix by adding discrete rubbery phases to improve the toughness properties. Liquid natural rubber (LNR) and liquid epoxidized natural rubber (LENR) were used as toughening agents in the epoxy resin to compare the properties of the modified networks. The mechanical and thermal properties have been studied to observe the effect of the modified epoxy network. It was found that by adding the rubbery phase into epoxy resin, the toughness of the epoxy was improved. A composite with 3 wt% of LENR possessed the highest mechanical properties for both flexural and impact properties. The scanning electron micrograph (SEM) demonstrated the discrete rubbery phases between the epoxy and the rubber particles. The glass transition temperature shifted to a lower temperature in the dynamic mechanical analysis (DMA) for the rubber-toughened epoxy.eng
dcterms.accessRightsopen access
dcterms.creatorTan, S. K.
dcterms.creatorAhmad, Sahrim
dcterms.creatorChia, C. H.
dcterms.creatorAl Mamun, Abdullah
dcterms.creatorHeim, Hans-Peter
dc.relation.doidoi:10.5923/j.materials.20130303.02
dc.subject.swdNaturkautschukger
dc.subject.swdEpoxideger
dc.subject.swdZähigkeitger
dc.subject.swdBiegeversuchger
dc.subject.swdSchlagprüfungger
dc.subject.swdMechanische Eigenschaftger
dc.type.versionpublishedVersion
dcterms.source.identifierEISSN 2162-8424
dcterms.source.issueIssue 3
dcterms.source.journalAmerican Journal of Materials Scienceeng
dcterms.source.pageinfo55-61
dcterms.source.volumeVolume 3
kup.iskupfalse


Dateien zu dieser Ressource

Thumbnail
Name:
license_rdf
Größe:
908Bytes
Format:
application/rdf+xml
Öffnen
Thumbnail
Name:
TanAhmadChiaMamunHeimLNR.pdf
Größe:
1.387Mb
Format:
PDF
Öffnen

Das Dokument erscheint in:

Zur Kurzanzeige

Namensnennung 4.0 International
Solange nicht anders angezeigt, wird die Lizenz wie folgt beschrieben: Namensnennung 4.0 International