Zur Kurzanzeige

dc.date.accessioned2022-12-13T12:20:55Z
dc.date.available2022-12-13T12:20:55Z
dc.date.issued2022
dc.identifierdoi:10.17170/kobra-202211117095
dc.identifier.urihttp://hdl.handle.net/123456789/14287
dc.language.isogerger
dc.rightsNamensnennung 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.subject.ddc620
dc.titlePraktische Anwendung von aktiver Vormagnetisierung in transformatorlosen DC/DC-Konverternger
dc.typeDissertation
dcterms.abstractMagnetic devices are used in almost every power electronic system. Therefore, their purpose and with that their requirements can vary in a wide range. The consequence is a large number of options regarding the priority of optimisation. In this work, the focus is on reducing the volume or weight of inductors in transformerless DC-DC converters. Active prmeagnetization is choosed as an optimisation approach. The technique enables an operation of the DC-DC-converter in the Triangular Current Mode (TCM), whereby switching-on-losses and recovery losses can be reduced or even eliminated. In a first step the basic methods of active premagnetization are analysed. For each one of them, a state of the art is presented. The focus of the following investigations lies on mixed premagnetization and orthogonal premagnetization. For both premagnetization methods basic investigations are conducted regarding the impact of the number of turns of the auxiliary winding, its arrangement and the direction of the auxiliary current on the magnetic device. The results show a signifficant impact of the direction of the auxiliary current. The other investigated factors are insignificant. Finally, the usage of a premagnetizable inductor in a full bridge converter and a half bridge converter is investigated at different voltage levels. The active premagnetization can cause a significant reduction of the inductor's volume. In case of lower voltage levels the overall effeciency of the circuit decreases. Regarding higher voltage levels the active premagnetization causes a higher overall efficiency, especially at partical load conditions bcompared to a conventional inductor. However, a higher effort regarding the generation of the auxiliary current and its control has to be considered.eng
dcterms.abstractMagnetische Bauelemente verfügen über ein breit gefächertes Anwendungs- und Funktionsspektrum. Aufgrund dessen variiert der Fokus ihrer Entwicklung zwischen den vier Schwerpunkten Energiee zienz, Volumen bzw. Gewicht, Kosten und Lebensdauer. Dabei wird i. d. R. einer oder mehrere Schwerpunkte priorisiert bzw. ein Optimum aus allen vier Gröÿen erarbeitet. Die Verbesserung bzw. Optimierung von magnetischen Bauelementen gerät verstärkt in den Fokus der Forschung und Entwicklung. In dieser Arbeit wurde die aktive Vormagnetisierung als Mittel zur Verbesserung von Induktivitäten in transformatorlosen DC/DC-Konvertern untersucht und diskutiert. Ein besonders Augenmerk lag dabei auf der Reduzierung des Volumens bzw. Gewichts des magnetischen Bauelements und die damit verbunden Auswirkungen auf den Konverter.ger
dcterms.accessRightsopen access
dcterms.creatorPfeiffer, Jonas
dcterms.dateAccepted2022-07-18
dcterms.extentXXIV, 167 Seiten, XV-XLV
dc.contributor.corporatenameKassel, Universität Kassel, Fachbereich Elektrotechnik / Informatikger
dc.contributor.refereeZacharias, Peter (Prof. Dr.)
dc.contributor.refereeFriebe, Jens (Prof. Dr.)
dc.subject.swdKonverter <Elektronik>ger
dc.subject.swdGleichspannungswandlerger
dc.subject.swdVormagnetisierungger
dc.subject.swdMagnetisches Bauelementger
dc.subject.swdInduktivitätger
dc.type.versionpublishedVersion
kup.iskupfalse
ubks.epflichttrue
ubks.relation.translationdoi:10.17170/kobra-202211117096eng


Dateien zu dieser Ressource

Thumbnail
Thumbnail

Das Dokument erscheint in:

Zur Kurzanzeige

Namensnennung 4.0 International
Solange nicht anders angezeigt, wird die Lizenz wie folgt beschrieben: Namensnennung 4.0 International