Datum
2020-01-03Autor
Moeini, GhazalSajadifar, Seyed VahidEngler, TomHeider, BenNiendorf, ThomasOechsner, MatthiasBöhm, StefanMetadata
Zur Langanzeige
Aufsatz
Effect of Friction Stir Processing on Microstructural, Mechanical, and Corrosion Properties of Al-Si12 Additive Manufactured Components
Zusammenfassung
Additive manufacturing (AM) is an advanced manufacturing process that provides the opportunity to build geometrically complex and highly individualized lightweight structures. Despite its many advantages, additively manufactured components suffer from poor surface quality. To
locally improve the surface quality and homogenize the microstructure, friction stir processing (FSP) technique was applied on Al-Si12 components produced by selective laser melting (SLM) using two different working media. The effect of FSP on the microstructural evolution, mechanical properties, and corrosion resistance of SLM samples was investigated. Microstructural investigation showed a considerable grain refinement in the friction stirred area, which is due to the severe plastic deformation and dynamic recrystallization of the material in the stir zone. Micro-hardness measurements revealed that the micro-hardness values of samples treated using FSP are much lower compared to SLM components in the as-built condition. This reduction of hardness values in samples treated with FSP can be explained by the dissolution of the very fine Si-phase network, being characteristic for SLM samples, during FSP. Surface topography also demonstrated that the FSP results in the reduction of surface roughness and increases the homogeneity of the SLM microstructure. Decreased surface roughness and grain size refinement in combination with the dissolved Si-phase network of the FSP treated material result in considerable changes in corrosion behavior. This work addresses the corrosion properties of surface treated additive manufactured Al-Si12 by establishing adequate microstructure-property relationships. The corrosion behavior of SLM-manufactured Al-Si12 alloys is shown to be improved by FSP-modification of the surfaces.
locally improve the surface quality and homogenize the microstructure, friction stir processing (FSP) technique was applied on Al-Si12 components produced by selective laser melting (SLM) using two different working media. The effect of FSP on the microstructural evolution, mechanical properties, and corrosion resistance of SLM samples was investigated. Microstructural investigation showed a considerable grain refinement in the friction stirred area, which is due to the severe plastic deformation and dynamic recrystallization of the material in the stir zone. Micro-hardness measurements revealed that the micro-hardness values of samples treated using FSP are much lower compared to SLM components in the as-built condition. This reduction of hardness values in samples treated with FSP can be explained by the dissolution of the very fine Si-phase network, being characteristic for SLM samples, during FSP. Surface topography also demonstrated that the FSP results in the reduction of surface roughness and increases the homogeneity of the SLM microstructure. Decreased surface roughness and grain size refinement in combination with the dissolved Si-phase network of the FSP treated material result in considerable changes in corrosion behavior. This work addresses the corrosion properties of surface treated additive manufactured Al-Si12 by establishing adequate microstructure-property relationships. The corrosion behavior of SLM-manufactured Al-Si12 alloys is shown to be improved by FSP-modification of the surfaces.
Zitierform
In: Metals Volume 10 / Issue 1 (2020-01-03) eissn:2075-4701Zitieren
@article{doi:10.17170/kobra-202304247884,
author={Moeini, Ghazal and Sajadifar, Seyed Vahid and Engler, Tom and Heider, Ben and Niendorf, Thomas and Oechsner, Matthias and Böhm, Stefan},
title={Effect of Friction Stir Processing on Microstructural, Mechanical, and Corrosion Properties of Al-Si12 Additive Manufactured Components},
journal={Metals},
year={2020}
}
0500 Oax 0501 Text $btxt$2rdacontent 0502 Computermedien $bc$2rdacarrier 1100 2020$n2020 1500 1/eng 2050 ##0##http://hdl.handle.net/123456789/14622 3000 Moeini, Ghazal 3010 Sajadifar, Seyed Vahid 3010 Engler, Tom 3010 Heider, Ben 3010 Niendorf, Thomas 3010 Oechsner, Matthias 3010 Böhm, Stefan 4000 Effect of Friction Stir Processing on Microstructural, Mechanical, and Corrosion Properties of Al-Si12 Additive Manufactured Components / Moeini, Ghazal 4030 4060 Online-Ressource 4085 ##0##=u http://nbn-resolving.de/http://hdl.handle.net/123456789/14622=x R 4204 \$dAufsatz 4170 5550 {{Rapid Prototyping <Fertigung>}} 5550 {{Korrosion}} 5550 {{Mikrostruktur}} 7136 ##0##http://hdl.handle.net/123456789/14622
2023-04-24T09:12:38Z 2023-04-24T09:12:38Z 2020-01-03 doi:10.17170/kobra-202304247884 http://hdl.handle.net/123456789/14622 eng Namensnennung 4.0 International http://creativecommons.org/licenses/by/4.0/ additive manufacturing friction stir processing microstructure corrosion 670 Effect of Friction Stir Processing on Microstructural, Mechanical, and Corrosion Properties of Al-Si12 Additive Manufactured Components Aufsatz Additive manufacturing (AM) is an advanced manufacturing process that provides the opportunity to build geometrically complex and highly individualized lightweight structures. Despite its many advantages, additively manufactured components suffer from poor surface quality. To locally improve the surface quality and homogenize the microstructure, friction stir processing (FSP) technique was applied on Al-Si12 components produced by selective laser melting (SLM) using two different working media. The effect of FSP on the microstructural evolution, mechanical properties, and corrosion resistance of SLM samples was investigated. Microstructural investigation showed a considerable grain refinement in the friction stirred area, which is due to the severe plastic deformation and dynamic recrystallization of the material in the stir zone. Micro-hardness measurements revealed that the micro-hardness values of samples treated using FSP are much lower compared to SLM components in the as-built condition. This reduction of hardness values in samples treated with FSP can be explained by the dissolution of the very fine Si-phase network, being characteristic for SLM samples, during FSP. Surface topography also demonstrated that the FSP results in the reduction of surface roughness and increases the homogeneity of the SLM microstructure. Decreased surface roughness and grain size refinement in combination with the dissolved Si-phase network of the FSP treated material result in considerable changes in corrosion behavior. This work addresses the corrosion properties of surface treated additive manufactured Al-Si12 by establishing adequate microstructure-property relationships. The corrosion behavior of SLM-manufactured Al-Si12 alloys is shown to be improved by FSP-modification of the surfaces. open access Moeini, Ghazal Sajadifar, Seyed Vahid Engler, Tom Heider, Ben Niendorf, Thomas Oechsner, Matthias Böhm, Stefan 11 Seiten doi:10.3390/met10010085 Rapid Prototyping <Fertigung> Korrosion Mikrostruktur publishedVersion eissn:2075-4701 Issue 1 Metals Volume 10 false 85
Die folgenden Lizenzbestimmungen sind mit dieser Ressource verbunden: