dc.date.accessioned | 2024-09-23T12:42:53Z | |
dc.date.available | 2024-09-23T12:42:53Z | |
dc.date.issued | 2024-08-01 | |
dc.identifier | doi:10.17170/kobra-2024092310868 | |
dc.identifier.uri | http://hdl.handle.net/123456789/16058 | |
dc.description.sponsorship | Gefördert im Rahmen des Projekts DEAL | ger |
dc.language.iso | eng | |
dc.rights | Namensnennung 4.0 International | * |
dc.rights.uri | http://creativecommons.org/licenses/by/4.0/ | * |
dc.subject | cladded steel | eng |
dc.subject | high-cycle fatigue | eng |
dc.subject | layered metal composites | eng |
dc.subject | low-cycle fatigue | eng |
dc.subject | microstructure | eng |
dc.subject.ddc | 600 | |
dc.title | Impact of a single-side 100Cr6 clad layer on the tensile and fatigue properties of S550MC steel | eng |
dc.type | Aufsatz | |
dcterms.abstract | The production of newly developed hot-rolled layered metal composites (LMC) leads to the availability of sheet materials with specifically adjustable, graded properties being cost-effective and suitable for large-scale production. As many of the envisaged applications of these LMC, e.g., clutch disc carriers, suffer from cyclic loading during service life, a fundamental knowledge of the fatigue behavior is required in order to ensure safe and reliable application of the components. Therefore, the present study focuses on the fatigue behavior of a hot-rolled two-layer LMC consisting of a S550MC substrate layer and a 100Cr6 clad layer. In order to investigate the influence of the clad layer, two conditions are directly compared, i.e., the two-layer laminate cladded steel and the single-layer substrate condition. Results presented by mechanical testing include hardness measurements and tensile tests as well as strain-controlled low-cycle fatigue and stress-controlled high-cycle fatigue tests. These results are discussed based on evolution of microstructure, residual stress, and defects, respectively, as elaborated by scanning electron microscopy, X-ray diffraction, and fracture surface analysis. | eng |
dcterms.accessRights | open access | |
dcterms.creator | Krochmal, Marcel | |
dcterms.creator | Wegener, Thomas | |
dcterms.creator | Niendorf, Thomas | |
dc.relation.doi | doi:10.1111/ffe.14383 | |
dc.relation.projectid | Grant Number: 461734789 | |
dc.subject.swd | Plattierter Stahl | ger |
dc.subject.swd | Ermüdung bei hohen Lastspielzahlen | ger |
dc.subject.swd | Verbundwerkstoff | ger |
dc.subject.swd | Ermüdung bei niedrigen Lastspielzahlen | ger |
dc.subject.swd | Mikrostruktur | ger |
dc.type.version | publishedVersion | |
dcterms.source.identifier | eissn:1460-2695 | |
dcterms.source.issue | Issue 10 | |
dcterms.source.journal | Fatigue & Fracture of Engineering Materials & Structures | eng |
dcterms.source.pageinfo | 3707-3722 | |
dcterms.source.volume | Volume 47 | |
kup.iskup | false | |