Suche
Anzeige der Dokumente 11-20 von 20
Dissertation
High-Speed Semiconductor Lasers based on Low-Dimensional Active Materials for Optical Telecommunication
(2012-07-10)
The scope of this work is the fundamental growth, tailoring and characterization of self-organized indium arsenide quantum dots (QDs) and their exploitation as active region for diode lasers emitting in the 1.55 µm range. This wavelength regime is especially interesting for long-haul telecommunications as optical fibers made from silica glass have the lowest optical absorption. Molecular Beam Epitaxy is utilized as fabrication technique for the quantum dots and laser structures. The results presented in this thesis ...
Dissertation
GaInAsP-basierende Resonatorstrukturen
(2006-10-27)
Physikalische Grundlagenforschung und anwendungsorientierte physikalische Forschung auf den Gebieten nanoskaliger kristalliner und amorpher fester Körper haben in vielfacher Weise eine große Bedeutung. Neben dem Verständnis für die Struktur der Materie und die Wechselwirkung von Objekten von der Größe einiger Atome ist die Erkenntnis über die physikalischen Eigenschaften nanostrukturierter Systeme von hohem Interesse. Diese Forschung eröffnet die Möglichkeit, die mit der Mikroelektronik begonnene Miniaturisierung ...
Dissertation
Herstellung von spannungsoptimierten Silizium-Membranen durch den elektrochemischen Ätzstopp an pn-Übergängen
(2004-12-15)
Vielen Sensoren in mikroelektromechanische Systemen (MEMS) liegen Siliziummembranen zu Grunde. Die Membranen werden mit unterschiedlichen Verfahren hergestellt. Zum Teil kann man Opferschichten benutzen. Will man jedoch Membranen aus kristallinem Silizium, so muß man auf Ätzstopptechniken zurückgreifen. Eine gängige Methode verwendet vergrabene p^(+)-Schichten. Die sehr hohe Dotierung des Siliziums führt jedoch zu unüberwindbaren Problemen bei der Schaltkreisintegration. Die Verwendung von pn-Übergängen beim ...
Dissertation
Mikrostrukturierte Sensoren für die pH-Wert-Bestimung auf Basis von dünnen, intrinisch leitfähigen Polyanilinschichten
(2005-02-02)
Der pH-Wert stellt in der Chemie, Physik, Biologie, Pharmazie und Medizin eine wichtige Meßgröße dar, da eine Vielzahl von Reaktionen durch den pH-Wert bestimmt wird. In der Regel werden zur pH-Wert-Messung Glaselektroden eingesetzt. Hierbei konnte der pH-sensitive Bereich zwar bis auf einige Mikrometer reduziert werden, aber die Gesamtab-messungen betragen immer noch 15-20 cm. Mit der Einführung miniaturisierter Reaktionsgefäße ist daher der Bedarf an miniaturisierten Sensoren enorm gestiegen. Um in solchen Gefäßen ...
Dissertation
Spontane Strukturbildung in Mehrschichtsystemen unter Verwendung Molekularer Gläser
(2005-03-03)
Den Schwerpunkt dieser Dissertation bildet zum einen die Entwicklung eines theoretischen Modells zur Beschreibung des Strukturbildungsprozesses in organisch/anorganischen Doppelschichtsystemen und zum anderen die Untersuchung der Übertragbarkeit dieser theoretisch gewonnenen Ergebnisse auf reale Systeme. Hierzu dienen systematische experimentelle Untersuchungen dieses Phänomens an einem Testsystem. Der Bereich der selbstorganisierenden Systeme ist von hohem wissenschaftlichen Interesse, erlaubt er doch die Realisierung ...
Dissertation
Development of directly modulated high speed telecommunication lasers based on surface defined feedback gratings
(2012-10-31)
High-speed semiconductor lasers are an integral part in the implemen- tation of high-bit-rate optical communications systems. They are com- pact, rugged, reliable, long-lived, and relatively inexpensive sources of coherent light. Due to the very low attenuation window that exists in the silica based optical fiber at 1.55 μm and the zero dispersion point at 1.3 μm, they have become the mainstay of optical fiber com- munication systems. For the fabrication of lasers with gratings such as, distributed bragg reflector ...
Dissertation
Surface modifications of nanocrystalline diamond films and their functionalization with phthalocyanines
(2016-06-30)
Boron-doped diamond is a promising electrode material for a number of applications providing efficient carrier transport, a high stability of the electrolytic performance with time, a possibility for dye-sensitizing with photosensitive molecules, etc. It can be functionalized with electron donor molecules, like phthalocyanines or porphyrins, for the development of light energy conversion systems. For effective attachment of such molecules, the diamond surface has to be modified by plasma- or photo-chemical processes ...
Dissertation
1.55 µm High-Speed QDs Lasers for Optical Telecommunication Applications
(2014-12-19)
In this work investigation of the QDs formation and the fabrication of QD based semiconductor lasers for telecom applications are presented. InAs QDs grown on AlGaInAs lattice matched to InP substrates are used to fabricate lasers operating at 1.55 µm, which is the central wavelength for far distance data transmission. This wavelength is used due to its minimum attenuation in standard glass fibers.
The incorporation of QDs in this material system is more complicated in comparison to InAs QDs in the GaAs system. Due ...
Dissertation
Piezoresistive cantilevers with an integrated bimorph actuator
(2004-07-26)
Scanning Probe Microscopy (SPM) has become of fundamental importance for research in area of micro and nano-technology. The continuous progress in these fields requires ultra sensitive measurements at high speed. The imaging speed limitation of the conventional Tapping Mode SPM is due to the actuation time constant of piezotube feedback loop that keeps the tapping amplitude constant. In order to avoid this limit a deflection sensor and an actuator have to be integrated into the cantilever. In this work has been ...
Dissertation
Lithography-free micro- and nanostructuring based on conventional plasma etching
(2005-02-02)
In now-a-days semiconductor and MEMS technologies the photolithography is the working horse for fabrication of functional devices. The conventional way (so called Top-Down approach) of microstructuring starts with photolithography, followed by patterning the structures using etching, especially dry etching. The requirements for smaller and hence faster devices lead to decrease of the feature size to the range of several nanometers. However, the production of devices in this scale range needs photolithography equipment, ...