Suche
Anzeige der Dokumente 71-78 von 78
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Characterization of Mechanical Properties, Macroscopic Deformation Behavior, and Microstructure of Functionally Graded 22MnB5 Steel
(2021-03-24)
The focus of this study is on the characterization of the local plastic deformation and failure of functionally graded 22MnB5 plates after hot stamping using an in situ approach. Various forming strategies at elevated temperatures are performed using differentially tempered forming tools to locally tailor the microstructure. By controlling the cooling rate, graded as well as martensitic and ferritic–pearlitic microstructures are obtained. Experimental analysis includes evaluation of the material- and geometry-dependent ...
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Additive Manufacturing of Compositionally-Graded AISI 316L to CoCrMo Structures by Directed Energy Deposition
(2021-08-30)
In the present study, compositionally-graded structures of AISI 316L and CoCrMo alloy are manufactured by powder-based laser-beam directed energy deposition (DED-LB). Through a process-integrated adjustment of powder flow, in situ alloying of the two materials becomes feasible. Thus, a sharp and a smooth transition with a mixture of both alloys can be realized. In order to investigate the phase formation during in situ alloying, a simulation approach considering equilibrium calculations is employed. The findings ...
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Dynamic Tensile Deformation of High Strength Aluminum Alloys Processed Following Novel Thermomechanical Treatment Strategies
(2020-05-14)
Herein, the effects of a very recently introduced novel thermomechanical process route on the microstructural evolution and dynamic tensile deformation behavior of two different precipitation hardenable aluminum alloys, i.e., AA6082 and AA7075, are studied. The investigated materials are hot formed and quenched in differently tempered tools to reveal the influence of cooling rate. Microstructure analysis is conducted to study the influences of different cooling strategies on the microstructure evolution and prevailing ...
Aufsatz
Injection molded components with functionally graded foam structures – Procedure and essential results
(2015-02-13)
In the past few years, foam injection molding has increasingly gained significance in the field of technical plastic components. This is due to the development of new processes and processing combinations and efforts to produce lightweight products. In this article, a special tool technology will be introduced, which aids the process of expanding the existing areas of applications. The technology enables the production of foam injection molded components with different foaming ratios. This is made possible by core ...
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Efficient Spatial and Temporal Modelling of Material Temperatures within Self-reinforced Polypropylene Sheets during IR Radiation
(2013-07-20)
Polymer composites of self-reinforced fibres and a matrix composed of the same plastic material display an outstanding mechanical performance and an excellent recyclability. Hence, these materials are suitable for many practical applications. One disadvantage, however, is the narrow processing window that is caused by a strong pressure and temperature sensitivity of the self-reinforced fibres. In this paper, an approach to efficiently model the spatial and temporal temperature evolution is presented. Advanced empirical ...
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Fabrication and characterization of ethylene–octene copolymer composites with ionic liquid functionalized carbon nanotubes
(2017-10-16)
Modification of multi-walled carbon nanotubes (MWCNTs) by means of imidazolium ionic liquid (IL) was performed. Structural characterization of funtionalized nanofillers (IL-f-MWCNTs) was made by means of Raman spectroscopy and transmission electron microscopy. MWCNTs and IL-f-MWCNTs were introduced within ethylene octane copolymer (EOC) with octene co-monomer content of 17% by using the masterbatch approach. The efficiency of the carbonaceous nanofiller distribution within the polymer matrix was characterized by means ...
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
The Manufacture of Hot-Compacted Layered Composite Systems Made of Oriented Semifinished PP-Films
(2014-03-04)
Monoaxial stretched PP-films are used for the manufacture of hot-compacted layered composites. These are layered with stretched co-extruded coupling agent films, and are consolidated to laminates by means of a hot-compaction process, which employs pressure and temperature. This paper aims to examine the influence of the process settings on the properties of the composites during the hot-compaction process. For this purpose, the mechanical values will be determined by means of tensile testing variously compacted and ...