Search
Now showing items 31-40 of 48
Aufsatz
Mechanical properties of hybrid glass/kenaf fibre-reinforced epoxy composite with matrix modification using liquid epoxidised natural rubber
(2015-04-27)
The hybridisation of natural fibre with glass fibre provides a method to improve the mechanical properties instead of using the natural fibres alone. This research is focused on the hybridisation of glass/kenaf fibre with the addition of liquid epoxidised natural rubber to enhance the desired mechanical properties of the composite by reducing the synthetic fibre usage and encourage the natural fibre consumption. Liquid epoxidised natural rubber was added to the epoxy matrix in order to improve its mechanical properties ...
Aufsatz
Parameter identification for constitutive models of innovative textile composite materials using digital image correlation
(2019-11-18)
This contribution focuses on an innovative composite material consisting of textile layers made from continuous wooden fibers embedded in a thermoplastic matrix. A finite element simulation of potential use‐cases is planned to support the development process and to study the suitability of the material in an architectural context. The simulation is based on a constitutive model assuming homogenous orthotropic elastic behavior and will be expanded to include multiscale modeling in future research. The material parameters ...
Aufsatz
A Comparison Study of Liquid Natural Rubber (LNR) and Liquid Epoxidized Natural Rubber (LENR) as the Toughening Agent for Epoxy
(2013)
Rubber-toughened epoxy resins were prepared using the mechanical stirring method and molded into samples by compression molding. The aim of this study is to modify the brittleness of the epoxy matrix by adding discrete rubbery phases to improve the toughness properties. Liquid natural rubber (LNR) and liquid epoxidized natural rubber (LENR) were used as toughening agents in the epoxy resin to compare the properties of the modified networks. The mechanical and thermal properties have been studied to observe the effect ...
Aufsatz
Morphology-property-relationship of thermo-mechanically graded self-reinforced polypropylene composites
(2015-02-17)
In this paper the relationship between different composite morphologies and their mechanical properties is to be investigated. By manufacturing two different tape-based polypropylene composites in a compression moulding process, four varying degrees of compaction will be generated. The morphological structure is analyzed using confocal laser light microscopy and wet chemically etched specimen cross-sections. The etching process removes the amorphous phase in the polymer, making the macromolecular orientations and ...
Aufsatz
Characterization of polyamide 6.10 composites incorporated with microcrystalline cellulose fiber: Effects of fiber loading and impact modifier
(2018-08-14)
Microcrystalline cellulose (MCC) fiber‐reinforced polyamide 6.10 (PA) composites were prepared in the presence of an impact modifier (IM), exxelor VA1803 (VA), by melt compounding process. Fiber loading was considered from 20 to 30 wt.%, whereas IM was varied from 2.0 to 5.0 wt.%. Composites were characterized by tensile test, impact test, dynamic thermal mechanical analysis (DTMA), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and X‐ray diffraction (XRD). Composites’ fractured surfaces ...
Aufsatz
Crack path predictions in fiber reinforced composites
(2017-09-06)
Composite materials exhibit beneficial features compared to conventional engineering material, e.g. a comparable strength and a reduced weight at the same time. To fully exploit these beneficial properties within technical structures, fracture mechanical concepts must be taken into account. The global fracture behavior in composite materials is related to the local delamination at interfaces between matrix and inclusion as well as the local fracture behaviors of the constituents. Because of their structure, the global ...
Aufsatz
Optimization of thermomechanical processes for the functional gradation of polymers by means of advanced empirical modeling techniques
(2015-02-17)
In this paper, an optimization procedure for complex manufacturing processes is presented. The procedure is based on advanced empirical modeling techniques and will be presented in two parts. The first part comprises the selection and generation of the empirical surrogate models. The process organization and the design of experiments are taken into account. In order to analyze and optimize the processes based on the empirical models, advanced methods and tools are presented in the second part. These tools include ...
Aufsatz
A framework for the computer-aided planning and optimisation of manufacturing processes for components with functional graded properties
(2015-02-17)
In this contribution a framework for the computer-aided planning and optimisation of functional graded components is presented. The framework is divided into three modules - the "Component Description", the "Expert System" for the synthetisation of several process chains and the "Modelling and Process Chain Optimisation". The Component Description module enhances a standard computer-aided design (CAD) model by a voxel-based representation of the graded properties. The Expert System synthesises process steps stored ...
Aufsatz
Time-of-Flight Three Dimensional Neutron Diffraction in Transmission Mode for Mapping Crystal Grain Structures
(2017-08-25)
The physical properties of polycrystalline materials depend on their microstructure, which is the nano- to centimeter scale arrangement of phases and defects in their interior. Such microstructure depends on the shape, crystallographic phase and orientation, and interfacing of the grains constituting the material. This article presents a new non-destructive 3D technique to study centimeter-sized bulk samples with a spatial resolution of hundred micrometers: time-of-flight three-dimensional neutron diffraction (ToF ...
Aufsatz
Injection molded components with functionally graded foam structures – Procedure and essential results
(2015-02-13)
In the past few years, foam injection molding has increasingly gained significance in the field of technical plastic components. This is due to the development of new processes and processing combinations and efforts to produce lightweight products. In this article, a special tool technology will be introduced, which aids the process of expanding the existing areas of applications. The technology enables the production of foam injection molded components with different foaming ratios. This is made possible by core ...