Suche
Anzeige der Dokumente 1-4 von 4
Konferenzveröffentlichung
UV light irradiation of fibers in thermoplastic pultrusion for higher surface energy
(Society of Plastics Engineers, 2018)
Pultrusion is a common way to produce thermoplastic composites reinforced with different kinds of fibers. There are many different opportunities to improve the properties of a thermoplastic material. Different kind of fibers where pultruded in combination with different thermoplastic materials. The fiber content was set to 30wt% comparing the roving strain with the pultruded strain. UV-C light was used in the process to improve the fiber matrix adhesion. The pultruded strain was granulated and injection molded to ...
Aufsatz
Martensite aging in ⟨001⟩ oriented Co₄₉ Ni₂₁ Ga₃₀ single crystals in tension
(2018-03-22)
Co–Ni–Ga high-temperature shape memory alloys (HT-SMAs) are well-known candidate materials for damping applications at elevated temperatures. Recent studies showed that upon heat treatment in stress-induced martensite under compressive loads transformation temperatures can be increased significantly, qualifying Co–Ni–Ga for HT-actuation. The increase in transformation temperatures is related to a change in chemical order recently validated via neutron diffraction experiments. Since SMAs show distinct tension–compression ...
Aufsatz
Design of novel materials for additive manufacturing - Isotropic microstructure and high defect tolerance
(2018-01-22)
Electron Beam Melting (EBM) is a powder-bed additive manufacturing technology enabling the production of complex metallic parts with generally good mechanical properties. However, the performance of powder-bed based additively manufactured materials is governed by multiple factors that are difficult to control. Alloys that solidify in cubic crystal structures are usually affected by strong anisotropy due to the formation of columnar grains of preferred orientation. Moreover, processing induced defects and porosity ...