Search
Now showing items 71-80 of 86
Aufsatz
Influence of ethylene oxide and gamma irradiation sterilization processes on the degradation behaviour of poly(lactic acid) (PLA) in the course of artificially accelerated aging
(2024-02-10)
To promote the application of bio-based materials in the field of medical technology, it is essential to conduct additional research, focusing on their long-term performance after sterilization. For this purpose, the study examines the aging behaviour of three poly(lactic-acid) (PLA) materials, sterilized with either ethylene oxide or gamma irradiation, over a two years aging period, in accordance with ASTM F1980-21. During these investigations, a direct correlation between moisture absorption and degradation progression ...
Aufsatz
Characterization of polyamide 6.10 composites incorporated with microcrystalline cellulose fiber: Effects of fiber loading and impact modifier
(2018-08-14)
Microcrystalline cellulose (MCC) fiber‐reinforced polyamide 6.10 (PA) composites were prepared in the presence of an impact modifier (IM), exxelor VA1803 (VA), by melt compounding process. Fiber loading was considered from 20 to 30 wt.%, whereas IM was varied from 2.0 to 5.0 wt.%. Composites were characterized by tensile test, impact test, dynamic thermal mechanical analysis (DTMA), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and X‐ray diffraction (XRD). Composites’ fractured surfaces ...
Konferenzveröffentlichung
Influence Of The Fiber-Matrix-Interaction On The Fracture Behavior Of Regenerated Cellulose Fiber Reinforced Polypropylene
(Society of Plastics Engineers, 2017)
This investigation focuses on the fiber-matrix-interaction of man-made cellulose fibers (RCF) in a PP matrix with an additional MAPP content using an energetic evaluation of the single fiber pull-out test (SFPT). Furthermore glass fibers were characterized for reference purposes. With the SFPT the interfacial shear strength (IFFS) and the critical fiber length (lc) as well as the consumed energy of a fiber pull-out and a fiber rupture were determined. In a following step the resulting values of lc were related to the ...
Aufsatz
Fabrication and characterization of ethylene–octene copolymer composites with ionic liquid functionalized carbon nanotubes
(2017-10-16)
Modification of multi-walled carbon nanotubes (MWCNTs) by means of imidazolium ionic liquid (IL) was performed. Structural characterization of funtionalized nanofillers (IL-f-MWCNTs) was made by means of Raman spectroscopy and transmission electron microscopy. MWCNTs and IL-f-MWCNTs were introduced within ethylene octane copolymer (EOC) with octene co-monomer content of 17% by using the masterbatch approach. The efficiency of the carbonaceous nanofiller distribution within the polymer matrix was characterized by means ...
Konferenzveröffentlichung
Blending CA with PBS to increase the bonding strength in two-component injection molding
(Society of Plastics Engineers, 2019)
Since CA shows no adhesive properties in the two-component injection molding process with bio based TPU, blends of CA and PBS were produced to decrease the interfacial tension between the materials. While the interfacial tension was calculated from the results of a drop shape analysis, the adhesion strength was measured in peel tests according to the guideline VDI 2019. The comparison of the results gave information about whether the drop shape analysis is a valid method to analyze the adhesive characteristics of ...
Konferenzveröffentlichung
Natural fiber reinforced technical (bio-) composites modified with halogen-free flame retardants
(Society of Plastics Engineers, 2019)
Under the aspect of sustainability and the use of alternative materials, engineering thermoplastics such as polybutylene terephthalate (PBT) will be reinforced with renewable raw materials such as regenerated cellulose fibers.
The University of Kassel is developing cellulose regenerated fiber reinforced technical thermoplastics in a state-funded project with further companies. Since pure natural fibers cannot withstand the high operating temperature of engineering thermoplastics (Ts>230°C), regenerated cellulose ...
Aufsatz
Simultaneous impact modified and chain extended glass fiber reinforced poly(lactic acid) composites: Mechanical, thermal, crystallization, and dynamic mechanical performance
(2021-02-05)
Herein, glass fiber (GF) reinforced binary, ternary, and quaternary poly(lactic acid) (PLA) composites were prepared. Toughening, and chain extension of PLA was achieved through the incorporation of impact modifier and chain extender and their concurrent effects on the spectroscopic, crystallization, mechanical, thermal, and thermomechanical properties of the composites were investigated. High mechanical properties of GF influenced the mechanical performance of the composites. However, GF alone could not restrict the ...
Aufsatz
Modification of self-reinforced composites (SRCs) via film stacking process
(2022-02-25)
This work presents the mechanical behavior of self-reinforced composites (SRCs) manufactured and modified via film stacking. For modification, interleaved films made of polypropylene (PP), a thermoplastic elastomer and a polyolefin engage were combined in different ways to induce the elastic modifier into the matrix material. The content of modifier was also varied in two ways. First, the films were produced out of a single material and second out of a compound. So, the same content of modifier was implemented in two ...
Aufsatz
Wood-Polypropylene Composites: Influence of Processing on the Particle Shape and Size in Correlation with the Mechanical Properties Using Dynamic Image Analysis
(2018-11-16)
The particle size and shape are of momentous significance for the mechanical properties of plastic composites. However, natural fillers, like wood, are not consistent in these attributes. In order to investigate the shared traits between these characteristics, WPCs were produced using polypropylene, hardwood and softwood fillers with different particle sizes and a coupling agent. Afterwards, specimens were processed using an injection molding machine. The filler sizes and shapes were measured using dynamic image ...