Browsing Publikationen by Issue Date

Aufsatz
Correlation between morphology and notched impact strength of microcellular foamed polycarbonate

Bledzki, Andrzej Kornelius; Rohleder, Martin; Kirschling, Hendrik; Chate, Andris (2010)

Aufsatz
Polyester-Kenaf Composites

Ahmad, S. H.; Rasid, R.; Bonnia, N. N.; Zainol, I.; Mamun, A. A.; Bledzki, Andrzej K.; Beg, M. D. H. (2011)

Aufsatz
Correlation between injection moulding processing parameters and mechanical properties of microcellular polycarbonate

Bledzki, Andrzej Kornelius; Kirschling, Hendrik; Rohleder, Martin; Chate, Andris (2012)

Konferenzveröffentlichung
Pull and Foam - Injection moulding method: Foamed ribs for stiffening plane components

Heim, Hans-Peter; Tromm, Mike; Jarka, Stefan; Gövert, Stefan (Society of Plastics Engineers, 2012)

Aufsatz
Relaxation properties of polyoxymethylene and ethylene–octene copolymer blend in solid and melt states

Grigalovica, Agnese; Bartule, Madara; Zicans, Janis; Meri, Remo Merijs; Heim, Hans-Peter; Berger, Christian (2012-08-30)

Konferenzveröffentlichung
Development of a Radian Friction Welding Machine Using the Circular Process with Limited Rotational Motion

Heim, Hans-Peter; Jarka, Stefan; Fischer, Willi (Society of Plastics Engineers, 2013)

Aufsatz
A Comparison Study of Liquid Natural Rubber (LNR) and Liquid Epoxidized Natural Rubber (LENR) as the Toughening Agent for Epoxy

Tan, S. K.; Ahmad, Sahrim; Chia, C. H.; Al Mamun, Abdullah; Heim, Hans-Peter (2013)

Aufsatz
Efficient Spatial and Temporal Modelling of Material Temperatures within Self-reinforced Polypropylene Sheets during IR Radiation

Hess, Stefan; Ries, Angela; Kersting, Petra; Heim, Hans-Peter (2013-07-20)

Konferenzveröffentlichung
Assessment of the changeability of plastics processing systems

Heim, Hans-Peter; Sauer, Viola; Mieth, Florian (Society of Plastics Engineers, 2014)

Konferenzveröffentlichung
Formation of morphology as a function of process control by foam injection molding of a functionally graded component

Heim, Hans-Peter; Tromm, Mike (Society of Plastics Engineers, 2014)

Konferenzveröffentlichung
Hybrid composite materials made of polypropylene with wood and polyethylene terephthalate fibers

Heim, Hans-Peter; Rüppel, Annette; Al Mamun, Abdullah (Society of Plastics Engineers, 2014)

Aufsatz
The Manufacture of Hot-Compacted Layered Composite Systems Made of Oriented Semifinished PP-Films

Rohde, Björn; Wibbeke, Andrea; Heim, Hans-Peter; Schöppner, Volker (2014-03-04)

Browsing Publikationen by Issue Date

Aufsatz
Hysteresis measurements for characterizing the dynamic fatigue of R-SMC

Aufsatz
Fatigue behavior of composites with foamed matrix

Aufsatz
Interlaminar fracture toughness of GFRP influenced by fiber surface treatment

Aufsatz
Impact properties of natural fiber-reinforced epoxy foams

Aufsatz
Polycarbonate microfoams with a smooth surface and higher notched impact strength

Aufsatz
Microcellular wood fiber reinforced PP composites

Aufsatz
Microcellular injection molded wood fiber–PP composites: Part I

Aufsatz
Microcellular injection molded wood fiber-PP composites: Part II

Aufsatz
Correlation between morphology and notched impact strength of microcellular foamed polycarbonate

Aufsatz
Polyester-Kenaf Composites

Aufsatz
Correlation between injection moulding processing parameters and mechanical properties of microcellular polycarbonate

Konferenzveröffentlichung
Pull and Foam - Injection moulding method: Foamed ribs for stiffening plane components

Aufsatz
Relaxation properties of polyoxymethylene and ethylene–octene copolymer blend in solid and melt states

Konferenzveröffentlichung
Development of a Radian Friction Welding Machine Using the Circular Process with Limited Rotational Motion

Aufsatz
A Comparison Study of Liquid Natural Rubber (LNR) and Liquid Epoxidized Natural Rubber (LENR) as the Toughening Agent for Epoxy

Aufsatz
Efficient Spatial and Temporal Modelling of Material Temperatures within Self-reinforced Polypropylene Sheets during IR Radiation

Konferenzveröffentlichung
Assessment of the changeability of plastics processing systems

Konferenzveröffentlichung
Formation of morphology as a function of process control by foam injection molding of a functionally graded component

Konferenzveröffentlichung
Hybrid composite materials made of polypropylene with wood and polyethylene terephthalate fibers

Aufsatz
The Manufacture of Hot-Compacted Layered Composite Systems Made of Oriented Semifinished PP-Films

Browsing Publikationen by Issue Date

Aufsatz Hysteresis measurements for characterizing the dynamic fatigue of R-SMC ﻿

Aufsatz Fatigue behavior of composites with foamed matrix ﻿

Aufsatz Interlaminar fracture toughness of GFRP influenced by fiber surface treatment ﻿

Aufsatz Impact properties of natural fiber-reinforced epoxy foams ﻿

Aufsatz Polycarbonate microfoams with a smooth surface and higher notched impact strength ﻿

Aufsatz Microcellular wood fiber reinforced PP composites ﻿

Aufsatz Microcellular injection molded wood fiber–PP composites: Part I ﻿

Aufsatz Microcellular injection molded wood fiber-PP composites: Part II ﻿

Aufsatz Correlation between morphology and notched impact strength of microcellular foamed polycarbonate ﻿

Aufsatz Polyester-Kenaf Composites ﻿

Aufsatz Correlation between injection moulding processing parameters and mechanical properties of microcellular polycarbonate ﻿

Konferenzveröffentlichung Pull and Foam - Injection moulding method: Foamed ribs for stiffening plane components ﻿

Aufsatz Relaxation properties of polyoxymethylene and ethylene–octene copolymer blend in solid and melt states ﻿

Konferenzveröffentlichung Development of a Radian Friction Welding Machine Using the Circular Process with Limited Rotational Motion ﻿

Aufsatz A Comparison Study of Liquid Natural Rubber (LNR) and Liquid Epoxidized Natural Rubber (LENR) as the Toughening Agent for Epoxy ﻿

Aufsatz Efficient Spatial and Temporal Modelling of Material Temperatures within Self-reinforced Polypropylene Sheets during IR Radiation ﻿

Konferenzveröffentlichung Assessment of the changeability of plastics processing systems ﻿

Konferenzveröffentlichung Formation of morphology as a function of process control by foam injection molding of a functionally graded component ﻿

Konferenzveröffentlichung Hybrid composite materials made of polypropylene with wood and polyethylene terephthalate fibers ﻿

Aufsatz The Manufacture of Hot-Compacted Layered Composite Systems Made of Oriented Semifinished PP-Films ﻿

Aufsatz
Hysteresis measurements for characterizing the dynamic fatigue of R-SMC

Aufsatz
Fatigue behavior of composites with foamed matrix

Aufsatz
Interlaminar fracture toughness of GFRP influenced by fiber surface treatment

Aufsatz
Impact properties of natural fiber-reinforced epoxy foams

Aufsatz
Polycarbonate microfoams with a smooth surface and higher notched impact strength

Aufsatz
Microcellular wood fiber reinforced PP composites

Aufsatz
Microcellular injection molded wood fiber–PP composites: Part I

Aufsatz
Microcellular injection molded wood fiber-PP composites: Part II

Aufsatz
Correlation between morphology and notched impact strength of microcellular foamed polycarbonate

Aufsatz
Polyester-Kenaf Composites

Aufsatz
Correlation between injection moulding processing parameters and mechanical properties of microcellular polycarbonate

Konferenzveröffentlichung
Pull and Foam - Injection moulding method: Foamed ribs for stiffening plane components

Aufsatz
Relaxation properties of polyoxymethylene and ethylene–octene copolymer blend in solid and melt states

Konferenzveröffentlichung
Development of a Radian Friction Welding Machine Using the Circular Process with Limited Rotational Motion

Aufsatz
A Comparison Study of Liquid Natural Rubber (LNR) and Liquid Epoxidized Natural Rubber (LENR) as the Toughening Agent for Epoxy

Aufsatz
Efficient Spatial and Temporal Modelling of Material Temperatures within Self-reinforced Polypropylene Sheets during IR Radiation

Konferenzveröffentlichung
Assessment of the changeability of plastics processing systems

Konferenzveröffentlichung
Formation of morphology as a function of process control by foam injection molding of a functionally graded component

Konferenzveröffentlichung
Hybrid composite materials made of polypropylene with wood and polyethylene terephthalate fibers

Aufsatz
The Manufacture of Hot-Compacted Layered Composite Systems Made of Oriented Semifinished PP-Films