Suche
Anzeige der Dokumente 11-19 von 19
Aufsatz
Innovative Materials for Novel Concepts for Internal Heat Exchangers
(2018-07-27)
Internal heat exchangers are often employed in solar thermal applications as well as in many other applications that involve heat, and, for the most part, consist of metallic materials (copper, stainless steel). Corrugated stainless steel tubes are easy to assemble, and are commonly used in various storage geometries. In order to significantly reduce costs, alternative materials, such as plastics, can function as excellent substitutes. Alternative heat exchangers for the following examinations using various materials ...
Aufsatz
The Manufacture of Hot-Compacted Layered Composite Systems Made of Oriented Semifinished PP-Films
(2014-03-04)
Monoaxial stretched PP-films are used for the manufacture of hot-compacted layered composites. These are layered with stretched co-extruded coupling agent films, and are consolidated to laminates by means of a hot-compaction process, which employs pressure and temperature. This paper aims to examine the influence of the process settings on the properties of the composites during the hot-compaction process. For this purpose, the mechanical values will be determined by means of tensile testing variously compacted and ...
Aufsatz
Parameter identification for constitutive models of innovative textile composite materials using digital image correlation
(2019-11-18)
This contribution focuses on an innovative composite material consisting of textile layers made from continuous wooden fibers embedded in a thermoplastic matrix. A finite element simulation of potential use‐cases is planned to support the development process and to study the suitability of the material in an architectural context. The simulation is based on a constitutive model assuming homogenous orthotropic elastic behavior and will be expanded to include multiscale modeling in future research. The material parameters ...
Aufsatz
Investigation of residual stresses in polypropylene using hot plate welding
(2020-08-05)
During the cooling process of the molten material, residual stresses appear because the reduced volume of the cooled material cannot fully fill the space formerly occupied by the molten material. The morphology in and around the weld is formed by different factors depending on the material and process parameters. Different morphological structures relate to different mechanical properties. The process parameters and the welding results including morphology and residual stress are linked together. In this article, ...
Aufsatz
Investigations on Tightness of Polymer-Metal Hybrids in Environments with Thermal, Media, and Mechanical Loads
(2017-07-31)
With polymer-metal hybrids becoming more commonly used as structural components it was investigated how they perform in complex environments with combined thermal, media, and mechanical loads. Special attention was put on media tightness under said loads. This paper sums up the activities of the polymer technology research group of the University of Kassel on hybrids produced by overmolding metal inserts. Investigations concerning joint strength and influence of (cyclic) temperature loads and chemical corrosion on ...
Aufsatz
Mechanical Properties of Polydimethylsiloxane as a Function of the Amount and Type of Crosslinking Agent
(2017-06-13)
In this investigation, a high-consistency rubber (HCR) was mixed with five different, typically used crosslinking agents that are based on organic peroxide. Furthermore, the amount of crosslinking agent was varied in order to quantify the effect on the mechanical properties. All materials were processed in a hot pressing process, and, subsequently, post-cured. The properties were characterized by the measurement of the swelling ratio, shore A-hardness, rebound resilience and tensile test. We successfully proved that ...
Aufsatz
Characterization of wood-based multi-material systems under dynamic impact stress
(2018)
Due to its naturally grown properties, wood has played a rather subordinate role as a material for technical applications up to now. In this paper, multi-material systems based on veneers of beech (Fagus sylvatica) with different reinforcing variants were investigated. In addition to the influence of different adhesive systems (urea formaldehyde and polyurethane), the effect of reinforcing by aramid fiber fabric and stainless steel foil in different climates was examined. At the center of the investigations were ...
Aufsatz
Cross-Linked Hydrophobic Starch Granules in Blends with PLA
(2018-04-17)
The majority of native starch is used in the food sector and in the paper industry. Only a small amount is used in polymer engineering. One reason for the reluctance of the plastics processing industry to use starch as a filling material in polymer blends is the unsatisfactory mechanical behavior of starch when combined with thermoplastics. Another reason is the hydrophilicity of starch. In order to make these materials capable of competing, an amelioration of the mechanical properties is compulsory. By means of ...
Aufsatz
Fabrication and characterization of ethylene–octene copolymer composites with ionic liquid functionalized carbon nanotubes
(2017-10-16)
Modification of multi-walled carbon nanotubes (MWCNTs) by means of imidazolium ionic liquid (IL) was performed. Structural characterization of funtionalized nanofillers (IL-f-MWCNTs) was made by means of Raman spectroscopy and transmission electron microscopy. MWCNTs and IL-f-MWCNTs were introduced within ethylene octane copolymer (EOC) with octene co-monomer content of 17% by using the masterbatch approach. The efficiency of the carbonaceous nanofiller distribution within the polymer matrix was characterized by means ...