Suche
Anzeige der Dokumente 31-40 von 40
Konferenzveröffentlichung
Influence Of The Fiber-Matrix-Interaction On The Fracture Behavior Of Regenerated Cellulose Fiber Reinforced Polypropylene
(Society of Plastics Engineers, 2017)
This investigation focuses on the fiber-matrix-interaction of man-made cellulose fibers (RCF) in a PP matrix with an additional MAPP content using an energetic evaluation of the single fiber pull-out test (SFPT). Furthermore glass fibers were characterized for reference purposes. With the SFPT the interfacial shear strength (IFFS) and the critical fiber length (lc) as well as the consumed energy of a fiber pull-out and a fiber rupture were determined. In a following step the resulting values of lc were related to the ...
Konferenzveröffentlichung
Characterizing the Rheological Behavior of Liquid Silicone Rubber Using a High Pressure Capillary Rheometer
(Society of Plastics Engineers, 2016)
The injection molding process of liquid silicone rubber (LSR) imposes high demands on the injection molding machines and the tools due to the low viscosity of silicone rubber. There is very little data which describes the rheological behavior of LSR and its influencing factors across a range of shear rates.
In this study, the rheological behaviors of different types of LSR were characterized using a high pressure capillary rheometer with an apparent shear rate that ranged from 350 to 4000 1/s. In order to identify ...
Konferenzveröffentlichung
Hybrid composite materials made of polypropylene with wood and polyethylene terephthalate fibers
(Society of Plastics Engineers, 2014)
We aim to manufacture injection molded components which consist of thermoplastics reinforced with fibers and which have improved properties (high strength and high notched impact strength). Thus, we intend to access new application fields for the not readily visible area of the automobile interior.
Konferenzveröffentlichung
Joining Investigations of Polymer-Metal-Hybrids for Permanantly Non-Leaking Applications
(Society of Plastics Engineers, 2016)
The demand for light-weight construction and economic efficiency has led to the development of light-weight construction strategies, i.e., multi-material design, in many areas of industry. Here, the property profiles of the composite partners are utilized synergetically. Plastic-metal hybrid composites possess a large amount of potential in this regard owing to the weight reduction that can be achieved in the composite and the simultaneous enhancement of the mechanical properties.
Hybrid components have already ...
Konferenzveröffentlichung
Development of a Flexible Polymer Joining Center Capable of Performing Multiple Joining Processes Using Different Methods in a Single Cycle
(Society of Plastics Engineers, 2016)
Goal of this research and innovation project is the implementation of a flexible polymer joining center as a prototype machine integrating different friction welding methods. This prototype joining cell combines (a) flexibility by being capable of performing joining processes in any order in a single flow with (b) modularity by integrating unified interfaces for exchanging joining modules, and (c) scalability by offering a wide range of setups for smaller to larger work pieces. Corresponding interfaces to up- and ...
Buch
Beitrag zur Herstellung 3-dimensionaler Kunststoffscheiben mit integrierter Funktion zur Veränderung der Transparenz durch Elektrochromie
(kassel university press, 2017)
Ziel dieser Arbeit ist es Möglichkeiten der Kunststoffverarbeitung aufzuzeigen, um feste 3D Bauteile mit elektrochromen (EC) Eigenschaften herzustellen. Die momentanen EC Anwendungen reduzieren sich fast ausschließlich auf plane Fensterscheiben aus Glas für die Gebäudeverglasung. Vereinzelt gibt oder gab es aber auch Anwendungen im Flugzeug- und Automobilbau. Die Anforderungen bezüglich des Schaltverhaltens sind in den erwähnten Bereichen sehr hoch und führen zu einer kostenintensiven Produktion.
Am Anfang der Arbeit ...
Aufsatz
LSR-Schaum hergestellt im Spritzgießverfahren
(Universitätsbibliothek Kassel, 2019)
In diesem Beitrag wird die Wirkung expandierbarer thermoplastischer Mikrosphären als Treibmittel in Flüssigsilicon veranschaulicht. Sie können die Dichte der Vulkanisate deutlich verringern und so in der Anwendung zu Materialeinsparungen führen und das Isolationsverhalten gegen Wärme und Kälte sowie die Schwimmfähigkeit positiv beeinflussen.
Aufsatz
LSR-Foam produced by injection molding
(Universitätsbibliothek Kassel, 2019)
This paper illustrates the effect of expandable thermoplastic microspheres as blowing agents in liquid silicone rubber. They can significantly reduce the density of the vulcanizates and thus lead to material savings in the application and positively influence the insulation behaviour against heat and cold as well as the floatability.