Suche
Anzeige der Dokumente 11-20 von 30
Aufsatz
Injection molded components with functionally graded foam structures – Procedure and essential results
(2015-02-13)
In the past few years, foam injection molding has increasingly gained significance in the field of technical plastic components. This is due to the development of new processes and processing combinations and efforts to produce lightweight products. In this article, a special tool technology will be introduced, which aids the process of expanding the existing areas of applications. The technology enables the production of foam injection molded components with different foaming ratios. This is made possible by core ...
Aufsatz
Efficient Spatial and Temporal Modelling of Material Temperatures within Self-reinforced Polypropylene Sheets during IR Radiation
(2013-07-20)
Polymer composites of self-reinforced fibres and a matrix composed of the same plastic material display an outstanding mechanical performance and an excellent recyclability. Hence, these materials are suitable for many practical applications. One disadvantage, however, is the narrow processing window that is caused by a strong pressure and temperature sensitivity of the self-reinforced fibres. In this paper, an approach to efficiently model the spatial and temporal temperature evolution is presented. Advanced empirical ...
Aufsatz
Optimization of thermomechanical processes for the functional gradation of polymers by means of advanced empirical modeling techniques
(2015-02-17)
In this paper, an optimization procedure for complex manufacturing processes is presented. The procedure is based on advanced empirical modeling techniques and will be presented in two parts. The first part comprises the selection and generation of the empirical surrogate models. The process organization and the design of experiments are taken into account. In order to analyze and optimize the processes based on the empirical models, advanced methods and tools are presented in the second part. These tools include ...
Aufsatz
Morphology-property-relationship of thermo-mechanically graded self-reinforced polypropylene composites
(2015-02-17)
In this paper the relationship between different composite morphologies and their mechanical properties is to be investigated. By manufacturing two different tape-based polypropylene composites in a compression moulding process, four varying degrees of compaction will be generated. The morphological structure is analyzed using confocal laser light microscopy and wet chemically etched specimen cross-sections. The etching process removes the amorphous phase in the polymer, making the macromolecular orientations and ...
Aufsatz
A framework for the computer-aided planning and optimisation of manufacturing processes for components with functional graded properties
(2015-02-17)
In this contribution a framework for the computer-aided planning and optimisation of functional graded components is presented. The framework is divided into three modules - the "Component Description", the "Expert System" for the synthetisation of several process chains and the "Modelling and Process Chain Optimisation". The Component Description module enhances a standard computer-aided design (CAD) model by a voxel-based representation of the graded properties. The Expert System synthesises process steps stored ...
Aufsatz
Comparative investigation of two-dimensional imaging methods and X-ray tomography in the characterization of microstructure
(2017-10-02)
The microstructural features of three different materials have been quantified by means of 2D image analysis and X-ray micro-computer tomography (CT) and the results were compared to determine the reliability of the 2D analysis in the material characterization. The 3D quantification of shrinkage pores and Fe-rich inclusions of an Al-Si-Cu alloy by X-ray tomography was compared with the statistical analysis of the 2D metallographic pictures and a significant difference in the results was found due to the complex ...
Aufsatz
Innovative Materials for Novel Concepts for Internal Heat Exchangers
(2018-07-27)
Internal heat exchangers are often employed in solar thermal applications as well as in many other applications that involve heat, and, for the most part, consist of metallic materials (copper, stainless steel). Corrugated stainless steel tubes are easy to assemble, and are commonly used in various storage geometries. In order to significantly reduce costs, alternative materials, such as plastics, can function as excellent substitutes. Alternative heat exchangers for the following examinations using various materials ...
Aufsatz
The Manufacture of Hot-Compacted Layered Composite Systems Made of Oriented Semifinished PP-Films
(2014-03-04)
Monoaxial stretched PP-films are used for the manufacture of hot-compacted layered composites. These are layered with stretched co-extruded coupling agent films, and are consolidated to laminates by means of a hot-compaction process, which employs pressure and temperature. This paper aims to examine the influence of the process settings on the properties of the composites during the hot-compaction process. For this purpose, the mechanical values will be determined by means of tensile testing variously compacted and ...
Aufsatz
Parameter identification for constitutive models of innovative textile composite materials using digital image correlation
(2019-11-18)
This contribution focuses on an innovative composite material consisting of textile layers made from continuous wooden fibers embedded in a thermoplastic matrix. A finite element simulation of potential use‐cases is planned to support the development process and to study the suitability of the material in an architectural context. The simulation is based on a constitutive model assuming homogenous orthotropic elastic behavior and will be expanded to include multiscale modeling in future research. The material parameters ...
Aufsatz
Investigation of residual stresses in polypropylene using hot plate welding
(2020-08-05)
During the cooling process of the molten material, residual stresses appear because the reduced volume of the cooled material cannot fully fill the space formerly occupied by the molten material. The morphology in and around the weld is formed by different factors depending on the material and process parameters. Different morphological structures relate to different mechanical properties. The process parameters and the welding results including morphology and residual stress are linked together. In this article, ...