Suche
Anzeige der Dokumente 1-5 von 5
Konferenzveröffentlichung
Multicomponent Injection Molding Of Thermoplastics And Liquid Silicone Rubber (LSR) – Either Cured By Heat Or UV Light
(Society of Plastics Engineers, 2016)
For processing thermally curing liquid silicone rubber (LSR) as well as UV light curing LSR for multicompo-nent injection molding with thermoplastics in an compa-rable way a processing center was designed and set into operation.
For the production of the multicomponent specimens a modular tool was designed. In there a thermoplastic plate gets molded on the one side, then gets transferred auto-matically by a robot system and gets overmolded by the silicone on the other side. The complete silicone side of the tool is ...
Buch
Struktur-Eigenschafts-Beziehung von Mischungen aus thermoplastischem PMMA mit vernetzten PMMA-Kolloiden
(kassel university press, 2016)
Ziel dieser Arbeit war es, ein Compound aus Partikeln aus untereinander vernetzten Polymerketten, sogenannten Kolloiden, und thermoplastischem Matrixmaterial basierend auf dem gleichen Monomer (MMA) aus ingenieurwissenschaftlicher Sicht zu charakterisieren und die Struktur-Eigenschafts-Beziehungen zu klären. Durchgeführt wurden die Untersuchungen an Compounds mit Kolloiden mit verschiedenen Größen, Vernetzungsgraden und Anteilen, die zunächst in Benzol mit dem Matrixmaterial, Plexiglas® 6N, vermischt wurden.
Neben ...
Konferenzveröffentlichung
Characterizing the Rheological Behavior of Liquid Silicone Rubber Using a High Pressure Capillary Rheometer
(Society of Plastics Engineers, 2016)
The injection molding process of liquid silicone rubber (LSR) imposes high demands on the injection molding machines and the tools due to the low viscosity of silicone rubber. There is very little data which describes the rheological behavior of LSR and its influencing factors across a range of shear rates.
In this study, the rheological behaviors of different types of LSR were characterized using a high pressure capillary rheometer with an apparent shear rate that ranged from 350 to 4000 1/s. In order to identify ...
Konferenzveröffentlichung
Joining Investigations of Polymer-Metal-Hybrids for Permanantly Non-Leaking Applications
(Society of Plastics Engineers, 2016)
The demand for light-weight construction and economic efficiency has led to the development of light-weight construction strategies, i.e., multi-material design, in many areas of industry. Here, the property profiles of the composite partners are utilized synergetically. Plastic-metal hybrid composites possess a large amount of potential in this regard owing to the weight reduction that can be achieved in the composite and the simultaneous enhancement of the mechanical properties.
Hybrid components have already ...
Konferenzveröffentlichung
Development of a Flexible Polymer Joining Center Capable of Performing Multiple Joining Processes Using Different Methods in a Single Cycle
(Society of Plastics Engineers, 2016)
Goal of this research and innovation project is the implementation of a flexible polymer joining center as a prototype machine integrating different friction welding methods. This prototype joining cell combines (a) flexibility by being capable of performing joining processes in any order in a single flow with (b) modularity by integrating unified interfaces for exchanging joining modules, and (c) scalability by offering a wide range of setups for smaller to larger work pieces. Corresponding interfaces to up- and ...