Search
Now showing items 11-20 of 24
Aufsatz
Dynamic tensile deformation behavior of AISI 316L stainless steel fabricated by laser-beam directed energy deposition
(2023-11-07)
The dynamic deformation behavior of metallic materials is the key to crash-safe design in many applications, e.g., in the automotive sector. However, in the field of additive manufacturing, dynamic deformation properties have only been scarcely studied. Based on the intrinsic interrelationships of process parameters, post-process heat treatments and the resulting microstructure, the present study seeks to provide a holistic overview of the dynamic tensile deformation properties of AISI 316L stainless steel, fabricated ...
Aufsatz
On the Monotonic and Cyclic Behavior of an Al-Mg-Zn-Cu-Si Compositionally Complex Alloy
(2023-08-03)
In present work, the monotonic and cyclic properties of a novel Al-Mg-Zn-Cu-Si compositionally complex alloy (CCA) are investigated. Microstructural studies reveal that a eutectic phase and fishbone-type structures are embedded in the Al-matrix. The mechanical properties of this CCA obtained under compressive loading are found to be promising. However, low ultimate strength and brittle behavior are seen under tension. The fatigue performance of the alloy in the low-cycle fatigue (LCF) regime is poor. Microstructural ...
Aufsatz
Experimental Analysis of the Stability of Retained Austenite in a Low-Alloy 42CrSi Steel after Different Quenching and Partitioning Heat Treatments
(2023-06-21)
Quenching and partitioning (Q&P) steels are characterized by an excellent combination of strength and ductility, opening up great potentials for advanced lightweight components. The Q&P treatment results in microstructures with a martensitic matrix being responsible for increased strength whereas interstitially enriched metastable retained austenite (RA) contributes to excellent ductility. Herein, a comprehensive experimental characterization of microstructure evolution and austenite stability is carried out on a ...
Aufsatz
Electron Beam Welding of Hot-Rolled Fe–Mn–Al–Ni Shape Memory Alloy Sheets
(2023-04-25)
The present study focuses on the weldability of hot-rolled Fe–Mn–Al–Ni shape memory alloy sheets by vacuum electron beam welding. Tailored process-specific welding parameters, such as preheating with electron beam or beam oscillation during welding, allowed defect-free joining with very thin weld seams and heat-affected zones. By applying a post-weld cyclic heat treatment, abnormal grain growth can be promoted across the weld seams. However, regardless of the selected welding parameters, some specimens are characterized ...
Aufsatz
Low-Cycle-Fatigue Performance of Stress-Aged EN AW-7075 Alloy
(2023-05-05)
The effect of a novel heat treatment, that is, aging under superimposed external stress, on the fatigue performance and microstructural evolution of a high-strength aluminum alloy (EN AW-7075) is presented. Stress aging, a combination of heat treatment and superimposed external stress, can enhance the mechanical properties of EN AW-7075 under monotonic loading due to the acceleration of precipitation kinetics. Scanning electron microscopy (SEM) and scanning transmission electron microscopy (STEM) reveal that a longer ...
Aufsatz
Verbesserung der CO₂-Bilanz von Kalksandsteinen durch den Einsatz von Sägeschlamm als Optimierungszuschlag
(2023-12-06)
Rund 20% der aus den Rohstoffen Kalk, Sand und Wasser hergestellten Kalksandsteine (KS) in KS-XL-Formaten werden zur Vorkonfektionierung gesägt. Dabei fallen in den KS-Werken insgesamt rd. 20.000 t Sägeschlämme pro Jahr an, die derzeit keiner gezielten Verwendung zugeführt werden. Allerdings handelt es sich dabei bereits unter Einsatz von CO₂-intensivem Branntkalk gehärtetes Material, welches als Optimierungszusatz genutzt werden kann.
Insgesamt 13 verschiedene Sägeschlämme (SäS) wurden hinsichtlich ihrer Eignung ...
Aufsatz
Topology optimization considering self-weight
(2023-11-10)
In civil engineering self-weight loading usually represents the preponderant load case and shall therefore be considered in structural optimization. The present study investigates numerical topology optimization of structural stiffness with a bound on disposable amount of material. A customized topology optimization routine based on Sequential Quadratic Programming was built and is examined by means of known benchmark problems complemented by consideration of self-weight. This study aims to highlight the relevance ...
Aufsatz
Spatially resolved in situ analyses of the adsorption behavior of different admixtures on binders
(2023-12-06)
Admixtures play a key role in improving the performance of the cement paste matrix. A more efficient matrix can allow a reduction the binder content while maintaining the same properties. There is currently a lack of knowledge about the spatial distribution of admixtures in situ on binder surfaces which would facilitate the use of admixtures in general in inorganic binder systems. Imaging techniques such as confocal laser scanning microscopy (CLSM) and fluorescence microscopy can be used to study the spatiotemporal ...
Aufsatz
PrOuD: Probabilistic Outlier Detection Solution for Time-Series Analysis of Real-World Photovoltaic Inverters
(2023-12-21)
Anomaly detection methods applied to time series are mostly viewed as black boxes that solely provide a deterministic answer for the detected target. Without a convincing explanation, domain experts can hardly trust the detection results and must conduct further time-series diagnoses in real-world applications. To overcome this challenge, we mathematically analyzed the sources of anomalies and novelties in multivariate time series as well as their relationships from the perspective of Gaussian-distributed non-stationary ...
Aufsatz
Mechanically induced dye-release from polyurea microcapsules in a rubbery adhesive
(2023-07-13)
Especially in the building industry the demand for in situ monitoring concepts of adhesive joints persists. In a new approach, microcapsules filled with special dyes, are added into a rubbery adhesive. Certain stress levels within the adhesive lead to a breakage of the capsules, which release their liquid cores. This results in a detectable colour change and thus, enables non-destructive condition monitoring of the bond. Dye-filled polyurea microcapsules were produced by interfacial polymerization by varying synthesis ...