Suche
Anzeige der Dokumente 11-20 von 41
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
A Novel Approach to Robustly Determine Residual Stress in Additively Manufactured Microstructures Using Synchrotron Radiation
(2021-07-29)
In recent decades additive manufacturing (AM) for years has been in focus of academia and industry as its underlying production principle allows for the realization of designs of unprecedented geometrical complexity. However, often such structures are not realized due to the lack of understanding of structural and mechanical properties, this fact amongst others related to the unique microstructures established by the related processes. In this context, residual stresses, highly affected by the scan strategy and process ...
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Modelling stress‐state dependent nonlocal damage and failure of ductile metals
(2021-01-25)
Damage and failure of ductile metals is highly influenced by the stress state. In fact, void growth takes place under hydrostatic tensile loading and void coalescence leads eventually to ductile failure. A completely different damage mechanism occurs for shear dominated loading that results in void elongation within a narrow shear band. In order to account for both failure mechanisms, a stress state dependent damage model is proposed. The model is based on a continuum damage mechanics approach, whereby nonlinear ...
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Flow and fiber orientation of fresh fiber reinforced concrete
(2021-12-14)
The orientation of the fibers in UHPC is decisive for the tensile strength and failure of the components. The mold filling strategy during casting of structural components dictates the flow routing and thus the fiber orientation. In addition, the orientation of the fibers also affects the flow behavior of the suspension. In measurements of rheological properties in concrete rheometers, strongly scattering measurements often occur. In this paper, a novel fiber orientation model for viscoplastic fluids is investigated ...
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
On a hybrid approximation concept for self-excited periodic oscillations of large-scale dynamical systems
(2021-12-14)
When approximating periodic solutions in the context of large-scale dynamical systems involving strong local nonlinearities, efficiency is of special interest. Hence, the literature suggests a combination of two approximation methods for increasing the ratio of computational cost to accuracy. Within this contribution, a combination of Finite Difference and Harmonic Balance method is proposed. Due to the usage of Harmonic Balance it is shown, that the resulting equations only depend on the degrees of freedom that are ...
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
On Optimal Test Signal Design and Parameter Identification Schemes for Dynamic Takagi-Sugeno Fuzzy Models Using the Fisher Information Matrix
(2021-11-21)
This paper is concerned with the analysis of optimization procedures for optimal experiment design for locally affine Takagi-Sugeno (TS) fuzzy models based on the Fisher Information Matrix (FIM). The FIM is used to estimate the covariance matrix of a parameter estimate. It depends on the model parameters as well as the regression variables. Due to the dependency on the model parameters good initial models are required. Since the FIM is a matrix, a scalar measure of the FIM is optimized. Different measures and ...
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Multiscale modeling of ferroelectrics with stochastic grain size distribution
(2021-12-20)
Macroscopic properties of ferroelectrics are controlled by processes on the microscale, in particular the switching of crystal unit cells and the movement of domain walls, respectively. Besides these microscopic levels, the grains of a polycrystalline material constitute the mesoscopic scale. Interactions of grains with statistically distributed orientations, as a consequence of mechanical and electrostatic mismatch, give rise to for example, residual stress which in turn affects domain switching. A multiscale modeling ...
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Use of Design of Experiments (DoE) to Model the Sulphate Agent Amount of (Ultra)Finely Ground and Fast Hardening Portland Cement Clinker
(2021-09-25)
This paper presents a model to calculate the sulphate agent amount and sulphate agent ratio for fine grounded and fast hardening Portland cement clinker. Despite sufficient knowledge about the influence of calcium sulphate on the hydration process of cement, the sulphate agent amount is mostly adjusted empirically. As a result, often a wide and unfeasible experimental matrix has to be tested. In this work, Design of Experiments (DoE) was used in combination with in-situ X-ray diffraction (XRD) tests to accurately ...
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Full-scale testing of adhesively bonded timber-concrete composite beams
(2021-09-07)
This paper presents new findings on adhesively bonded timber-concrete composites with prefabricated concrete parts. Hereby, timber and concrete are bonded solely with adhesive and no metallic connectors have been used. Because the achievement of a continuous bond proved to be a critical point in past studies, special attention is given to that issue. The application procedure of the adhesives is investigated in small-scale bond samples and the manufacturing process in full-scale composite beams with a span of 8 m and ...
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
IMEX-DG Schemes for Advection-Diffusion Problems using Term-based or Domain-based IMEX Splitting
(2021-12-14)
IMEX partitioning may be based on a decomposition of the computational domain into two subgrids by implicitly discretizing the unknowns on the smallest cells while explicit time stepping is applied to moderately sized elements. Alternatively, advection-diffusion IMEX splitting applies implicit time discretization only to the viscous terms while inviscid terms are discretized explicitly. Analytical investigations have shown that a careful choice of both the specific IMEX scheme and the particular DG approach yield an ...
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Measurement and analysis of residual stresses and warpage in fiber reinforced plastic and hybrid components
(2021-02-16)
Glass/carbon fiber reinforced plastic (GFRP/CFRP) and hybrid components have attracted increasing attention in lightweight applications. However, residual stresses induced in the manufacturing process of these components can result in warpage and, eventually, negatively affect the mechanical performance of the composite structures. In the present work, GFRP, CFRP, GFRP/steel and CFRP/steel hybrid components were manufactured through the prepreg-press-technology always employing the same process parameters. The residual ...