Suche
Anzeige der Dokumente 21-30 von 59
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Influence of Cu Addition and Microstructural Configuration on the Creep Resistance and Mechanical Properties of an Fe-Based α/α′/α″ Superalloy
(2023-01-14)
Introducing Cu nanoparticles is an effective mechanism for strengthening and toughening Fe-based materials such as ultra-high-strength steels. Herein, the effect of Cu on the mechanical properties of a novel Fe-based α/α′/α″ superalloy is studied. Compared to a Cu-free reference alloy, nanoindentation reveals an increase in hardness, which was associated with the formation of Cu nanoparticles. Both alloys show room temperature (RT) compressive plastic strain at maximum stress greater than 8%, irrespective of the ...
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Additive Manufacturing of 3D Luminescent ZrO2:Eu3+ Architectures
(2022-04-27)
Implementation of more refined structures at the nano to microscale is expected to advance applications in optics and photonics. This work presents the additive manufacturing of 3D luminescent microarchitectures emitting light in the visible range. A tailor-made organo-metallic resin suitable for two-photon lithography is developed, which upon thermal treatment in an oxygen-rich atmosphere allows the creation of silicon-free tetragonal (t-) and monoclinic (m-) ZrO₂. The approach is unique because the tailor-made ...
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Structural reorientation and compaction of porous MoS₂ coatings during wear testing
(2022-04-02)
Industrial upscaling frequently results in a different coating microstructure than the laboratory prototypes presented in the literature. Here, we investigate the wear behavior of physical vapor deposited (PVD) MoS2 coatings: A dense, nanocrystalline MoS2 coating, and a porous, prismatic-textured MoS2 coating. Transmission electron microscopy (TEM) investigations before and after wear testing evidence a crystallographic reorientation towards a basal texture in both samples. A basal texture is usually desirable due ...
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Additive Manufacturing of Compositionally-Graded AISI 316L to CoCrMo Structures by Directed Energy Deposition
(2021-08-30)
In the present study, compositionally-graded structures of AISI 316L and CoCrMo alloy are manufactured by powder-based laser-beam directed energy deposition (DED-LB). Through a process-integrated adjustment of powder flow, in situ alloying of the two materials becomes feasible. Thus, a sharp and a smooth transition with a mixture of both alloys can be realized. In order to investigate the phase formation during in situ alloying, a simulation approach considering equilibrium calculations is employed. The findings ...
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Microcantilever Fracture Tests of α-Cr Containing NiAl Bond Coats
(2022-01-08)
MCrAlY bond coats are widely used as oxidation-resistant coatings on superalloys. The major phase is the thermally stable intermetallic β-NiAl phase. The addition of Cr increases the oxidation and corrosion resistance but leads to the formation of α-Cr precipitates. Both phases are brittle and limit the fracture toughness of these coatings. To study the influence of thermal exposure and the resulting changing chemical composition on the fracture properties, the fracture toughness of both phases is measured by notched ...
Dissertation
Trajectory Mapping in Physical and Topical Spaces
(2023)
In this dissertation, two different types of trajectories are investigated. In the engfirst part of this work, we investigate methods for the analysis of physical trajectories. We focus on scenarios, in which signal strengths ofWiFi access points are recorded. In detail, they are recorded through smartphone devices by people moving through a building. By means of theWiFi signal strengths, (physical) trajectories of humans are reconstructed, which reflect the locations visited over time. Accurate localization based ...
Dissertation
![Eingeschränkter Zugang](/themes/Mirage2/images/lock-128.png)
Microfluidics Based 3D Printed Reconfigurable Antenna for K-Band Applications
(2023)
In dieser Arbeit werden neuartige mikrofluid-basierte, rekonfigurierbare Antennen für Mikrowellen-Anwendungen vorgestellt. Ebenfalls vorgestellt wird eine kosteneffektive Methode zur ultra-breitbandigen Erhöhung (definiert als Bandbreite von 20% oder höher als die zentrale Frequenz) des Antennengewinns basierend auf dielektrischen Linsen. Zunächst wird dabei ein fest-verdrahtetes Design entwickelt. Diese Antenne verwendet kapazitive Lasten, um die -10 dB Bandbreite um den Faktor 2.5 (+150%) zu erhöhen. Die vorgeschlagene ...
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Investigation of processing windows in additive manufacturing of AlSi10Mg for faster production utilizing data-driven modeling
(2022-04-29)
To reduce production time and decrease production cost, the increase of layer thickness is an adequate option in powder bed fusion. In order to determine the relationships between process parameters in laser powder bed fusion (PBF-LB/M) and final porosity in AlSi10Mg, samples were processed following a space-filling experimental design in the present study. A total of 144 samples were fabricated considering layer thicknesses of 30 µm, 45 µm, 60 µm, and 90 µm. Afterwards, porosity was assessed using image analysis and ...
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Influence of Surface Mechanical Attrition Treatment (SMAT) on Microstructure, Tensile and Low-Cycle Fatigue Behavior of Additively Manufactured Stainless Steel 316L
(2023-08-29)
Direct Energy Deposition (DED), as one common type of additive manufacturing, is capable of fabricating metallic components close to net-shape with complex geometry. Surface mechanical attrition treatment (SMAT) is an advanced surface treatment technology which is able to yield a nanostructured surface layer characterized by compressive residual stresses and work hardening, thereby improving the fatigue performances of metallic specimens. In the present study, stainless steel 316L specimens were fabricated by DED and ...
Dissertation
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Regionalisierung von E-Kfz-Ladestellen in Szenarien für den zukünftigen Ausbau in Deutschland
(2023-04)
Ein wesentlicher Baustein zur Senkung der CO2-Emissionen im Verkehrssektor ist die Elektrifizierung des Individualverkehrs, wobei die schnell wachsende Lade-infrastruktur Auswirkungen auf das Stromnetz hat. Netzberechnungen erfordern die räumliche Verortung von zukünftigen Ladestellen. Die vorliegende Arbeit mo-delliert dafür Heimladestellen und öffentlich zugängliche Ladestellen holistisch und punktgenau, und ist für alle Gemeinden in Deutschland anwendbar. Zunächst wird die Anzahl an Elektrofahrzeugen und Ladestellen ...