Suche
Anzeige der Dokumente 1881-1890 von 1971
Aufsatz
Additive Manufacturing of Binary Ni–Ti Shape Memory Alloys Using Electron Beam Powder Bed Fusion: Functional Reversibility Through Minor Alloy Modification and Carbide Formation
(2022-11-30)
Shape memory alloys (SMAs), such as Ni–Ti, are promising candidates for actuation and damping applications. Although processing of Ni–Ti bulk materials is challenging, well-established processing routes (i.e. casting, forging, wire drawing, laser cutting) enabled application in several niche applications, e.g. in the medical sector. Additive manufacturing, also referred to as 4D-printing in this case, is known to be highly interesting for the fabrication of SMAs in order to produce near-net-shaped actuators and ...
Aufsatz
Electron Beam Welding of Hot-Rolled Fe–Mn–Al–Ni Shape Memory Alloy Sheets
(2023-04-25)
The present study focuses on the weldability of hot-rolled Fe–Mn–Al–Ni shape memory alloy sheets by vacuum electron beam welding. Tailored process-specific welding parameters, such as preheating with electron beam or beam oscillation during welding, allowed defect-free joining with very thin weld seams and heat-affected zones. By applying a post-weld cyclic heat treatment, abnormal grain growth can be promoted across the weld seams. However, regardless of the selected welding parameters, some specimens are characterized ...
Aufsatz
Low-Cycle-Fatigue Performance of Stress-Aged EN AW-7075 Alloy
(2023-05-05)
The effect of a novel heat treatment, that is, aging under superimposed external stress, on the fatigue performance and microstructural evolution of a high-strength aluminum alloy (EN AW-7075) is presented. Stress aging, a combination of heat treatment and superimposed external stress, can enhance the mechanical properties of EN AW-7075 under monotonic loading due to the acceleration of precipitation kinetics. Scanning electron microscopy (SEM) and scanning transmission electron microscopy (STEM) reveal that a longer ...
Aufsatz
On the Reliability of Automated Analysis of Fracture Surfaces Using a Novel Computer Vision-Based Tool
(2023-08-05)
Fracture surface analysis is of utmost importance with respect to structural integrity of metallic materials. This especially holds true for additively manufactured materials. Despite an increasing trend of automatization of testing methods, the analysis and classification of fatigue fracture surface images is commonly done manually by experts. Although this leads to correct results in most cases, it has several disadvantages, e.g., the need of a huge knowledge base to interpret images correctly. In present work, an ...
Aufsatz
Cyclic Superelastic Behavior of Iron-Based Fe-Ni-Co-Al-Ti-Nb Shape Memory Alloy
(2023-01-03)
Iron-based shape memory alloys came into focus as promising candidate materials for large-scale structural applications owing to their cost-efficiency. In the present work, the superelastic properties of a recently introduced Fe-Ni-Co-Al-Ti-Nb shape memory alloy are investigated. For 〈001〉-oriented single-crystalline material in aged condition (650 °C/6 h), an incremental strain test reveals excellent superelasticity at −130 °C with fully reversible strains up to about 6%. Under cycling loading at different test ...
Aufsatz
Electrochemical polarization behavior and superelastic properties of a Fe–Mn–Al–Ni–Cr shape memory alloy
(2022-10-22)
The present study investigates the corrosion behavior of a Fe–Mn–Al–Ni–Cr shape memory alloy in a 5.0 wt% NaCl solution in combination with the functional properties. In a single crystalline condition, the investigated alloy shows a superior superelastic response with a maximum recovery strain of 5.2%. Furthermore, the results of the potentiodynamic polarization and impedance spectroscopy show that the addition of chromium generally improves corrosion resistance by increasing the resistance to localized corrosion. ...
Aufsatz
Continuous Feature Networks: A Novel Method to Process Irregularly and Inconsistently Sampled Data With Position-Dependent Features
(2023-12-30)
Continuous Kernels have been a recent development in convolutional neural networks. Such kernels are used to process data sampled at different resolutions as well as irregularly and inconsistently sampled data. Convolutional neural networks have the property of translational invariance (e.g., features are detected regardless of their position in the measurement domain), which is unsuitable if the position of detected features is relevant for the prediction task. However, the capabilities of continuous kernels to ...
Aufsatz
UVC Irradiation as a Surface Treatment of Polycarbonate to Generate Adhesion to Liquid Silicone Rubber in an Overmolding Process
(2024-04-18)
This study investigates the adhesion properties of polycarbonate (PC) and liquid silicone rubbers (LSR) through surface activation using ultraviolet C (UVC) radiation. While self-adhesive LSRs adhere easily to certain thermoplastic composites such as polybutylene terephthalate (PBT) and polyamides (PAs), bonding to PC typically requires surface treatment due to the lack of compatible functional groups. Previous methods like plasma or flame treatment have been effective, but the use of UVC radiation for surface ...
Aufsatz
Consumers ’ perception of sustainable packaging in the food industry: An online experiment
(2022-01)
Consumers evaluate products and make purchasing decisions based on packaging and its sustainable aspects. This research investigated how different packages and their quality, eco-friendliness, expensiveness, and convenience affected consumers’ intentions to purchase. Our sample comprised 299 French consumers of muesli cereals. We conducted an online choice experiment to analyze and measure consumers’ perception of sustainable packaging, comparing three distinct experimental groups. Findings revealed that quality and ...
Aufsatz
Geschichtswissenschaft
(2021-07-15)
Die mittelalterliche Geschichte ist derzeit noch relativ fester Bestandteil des allgemeinen Geschichtsunterrichts, obwohl die zeitliche Differenzierung durch die Kompetenzorientierung in den Lehrplänen immer weiter zurückgedrängt wird. Anders als rein chronologisch-inhaltliche Lehrpläne bietet die Kompetenzorientierung jedoch grundsätzlich gute Möglichkeiten, ‚mittelalterliches‘ Material einzubauen. In den meisten geisteswissenschaftlichen Fakultäten existiert in der Regel – mit einigen Ausnahmen – eine eigene ...