Search
Now showing items 161-170 of 1991
Aufsatz
In-situ full-field deformation analysis of injection-molded microcellular polycarbonate according to foam morphology patterns
(2023-06-02)
Deformation behavior of microcellular foam materials are sensitive to microstructural details. Therefore, the distinctive foam morphology patterns of foam injection-molded Polycarbonate are identified. These morphology patterns are investigated regarding their cell size, distance between cells, cell density, density reduction, homogeneity of cell size distribution, sphericity of cells and cell volume. Consequently, the predefined foam morphologies, the resulting modulus of elasticity and the elongation at break are ...
Aufsatz
Optimization on the manufacturing process of fried instant corn noodle using response surface methodology
(2023-07-31)
Instant corn noodles can be manufactured using the air drying and frying process. The objective of this study was to determine the optimum process parameters and emulsifier concentration to produce instant corn noodles from 100% corn flour with relatively good quality characteristics using a cooking-forming single screw extruder. This study consisted of two stages, namely the determination of corn noodles with the fastest cooking time using emulsifier concentrations of 0, 0.5, 1, and 1.5% from the weight of corn ...
Aufsatz
Traditional Seafood Product Purchase Through E-Commerce: The Impact of Perceived Risk and Benefit to Consumers’ Intention to Buy
(2023-07-31)
Traditional seafood products in Indonesia are also very diverse, influenced by ethnicity and eating habits. However, the problem is the low level of consumption of seafood products in Indonesia. There is a limited number of traditional seafood products have entered the e-commerce due to the lack of knowledge about consumer demand. To boost the purchase of traditional seafood product, consumers’ perception need to be explored as it plays prominent role in a successful food product. The aims of this research are to ...
Aufsatz
Analysis of Food Consumption Patterns as a Step for Mapping Future Food Needs Based on the Potential of Local Food
(2023-07-31)
Muara Gembong Village, in Bekasi Regency, West Java is an area that has a variety of potential local food ingredients that can improve the welfare of the surrounding community. It is necessary to map the consumption and use of local food ingredients in the area so that it can be identified the type of food that needs to be developed as a strategy to improve food security in Muara Gembong village. One way to identify this is by analyzing the community's food consumption patterns. This study aims to analyze food ...
Aufsatz
Trade-off between carbon offset and economic benefit: Potential of cocoa-based agroforestry system implemented in voluntary carbon market
(2023-11-02)
Agroforestry systems (AFS) are a viable option for the mitigation of deforestation. Thus far AFS has been recognized and financed through the Voluntary Carbon Market (VCM) program; however, analysis of the potential carbon credit payment and productivity trade-off has rarely been conducted. This study aims to analyse the potential of cocoa-based AFS in terms of the trade-off of carbon accumulation and productivity in West Sumatra, Indonesia. The trade-off is shown through 20 years of financial analysis between the ...
Aufsatz
Shape Memory Effect and Superelasticity of [001]-Oriented FeNiCoAlNb Single Crystals Aged under and without Stress
(2021-06-10)
The two-step ageing of Fe-28Ni-17Co-11.5Al-2.5Nb (at.%) single crystals under and without stress, leads to the precipitation of the γ′- and β-phase particles. Research has shown that γ–α′ thermoelastic martensitic transformation (MT), with shape memory effect (SME) and superelasticity (SE), develops in the [001]-oriented crystals under tension. SE was observed within the range from the temperature of the start of MT upon cooling Mₛ, to the temperature of the end of the reverse MT upon heating Af, and at temperatures ...
Aufsatz
Experimental Analysis of Residual Stresses in CFRPs through Hole-Drilling Method: The Role of Stacking Sequence, Thickness, and Defects
(2023-05-09)
Carbon fiber reinforced plastics (CFRPs) gained high interest in industrial applications because of their excellent strength and low specific weight. The stacking sequence of the unidirectional plies forming a CFRP laminate, and their thicknesses, primarily determine the mechanical performance. However, during manufacturing, defects, e.g., pores and residual stresses, are induced, both affecting the mechanical properties. The objective of the present work is to accurately measure residual stresses in CFRPs as well ...
Aufsatz
Micromechanical Modeling of AlSi10Mg Processed by Laser-Based Additive Manufacturing: From as-Built to Heat-Treated Microstructures
(2022-08-13)
The unique microstructure of the alloy AlSi10Mg produced by the laser-based powder bed fusion of metals (PBF-LB/M) provides high-strength and high-strain-hardening capabilities of the material. The microstructure and mechanical properties of 3D-printed, i.e., additively manufactured, AlSi10Mg are significantly altered by post-building heat-treatment processes applied in order to tailor the final properties of the parts. Using an accurate computational model to predict and improve the mechanical performance of 3D-printed ...
Aufsatz
Influence of the Miniaturisation Effect on the Effective Stiffness of Lattice Structures in Additive Manufacturing
(2020-10-29)
Thin-walled and cellular structures are characterised by superior lightweight potential due to their advantageous stiffness to weight ratio. They find particular interest in the field of additive manufacturing due to robust and reproducible manufacturability. However, the mechanical performance of such structures strongly depends on the manufacturing process and resultant geometrical imperfections such as porosity, deviations in strut thickness or surface roughness, for which an understanding of their influence is ...
Aufsatz
The Effect of Fiber Waviness on the Residual Stress State and Its Prediction by the Hole Drilling Method in Fiber Metal Laminates: A Global-Local Finite Element Analysis
(2021-01-15)
In this paper, fiber waviness, as one of the most frequently occurring defects in fiber reinforced composites, is numerically investigated with regard to the formation of residual stresses in fiber metal laminates. Furthermore, the prediction of the residual stress state in the thickness direction by means of the simulated hole drilling method is studied. To this regard, a global-local finite element analysis based on the submodel technique is presented. The submodel technique essentially consists of two governing ...