Suche
Anzeige der Dokumente 21-30 von 50
Konferenzveröffentlichung
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
The Adhesion of LSR Thermoplastic Composites after Storage Tests
(Society of Plastics Engineers, 2017)
The adhesion properties of liquid silicone rubber (LSR) and different thermoplastics (PC, PA, and PP) were examined in this investigation. In order to guarantee the adhesion of both components, an activation (silicatization) of the TP surface, which is a conventional method, was carried out. Furthermore, the long-term stability of the silicatization (storage of the activated surfaces) as well as the wetting behavior were investigated. Moreover, microscopic investigations were performed to analyze the activated ...
Konferenzveröffentlichung
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Flexible Foams made of Liquid Silicone Rubber and expandable Microspheres
(2019-10-02)
In this study, the possibility of foaming liquid silicone rubber (LSR) was investigated. The foam was produced by injection molding with two different thermoplastic, expandable microspheres. Different properties were tested using the S2-tensile bar, e.g. density, tensile strength, specific tensile strength, elongation at break, stress at 100 % strain and the hardness. It was found that the two types of microspheres used have similar effects on density, specific tensile strength and elongation at break, but differ in ...
Konferenzveröffentlichung
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
The lexicalization of complex constructions: an analysis of adjective-noun combinations
(Pasithee : Open Access Electronic Publications; Library & Information Center - University of Patras, 2016)
The current paper discusses the lexicalization of complex constructions composed of an adjective and a noun. It is argued that compounds/compound-like constructions are more prone to become lexicalized than phrases/phrase-like constructions. The relationship between lexicalization and the cognitive process of memorization represents a key point of our analysis. We report evidence from psycholinguistic studies contrasting compounds/compound-like constructions to phrases/phrase-like constructions either within a single ...
Konferenzveröffentlichung
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
The Influence of different die geometries on the Extrusion Process of High-Consistency Silicone Rubber
(Society of Plastics Engineers, 2019)
Silicone Rubber and especially High-Consistency Silicone Rubber (=HCR), are typically processed in the extrusion process. Due to the high requirements in terms of the ma-terial properties and the geometric dimensions, a funda-mental knowledge of the whole process including experi-ences in tool design are essential.
In this study, HCR with different Shore-hardnesses are extruded on a vertical silicone extrusion line with various breaker plates with different length to diameter ratios (=L/D-ratio) in order to analyze ...
Konferenzveröffentlichung
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Pull and Foam - Injection moulding method: Foamed ribs for stiffening plane components
(Society of Plastics Engineers, 2012)
The pull and foam method is a foam injection moulding method which is currently being developed at the Institut für Werkstofftechnik (IfW) (Institute of Materials Engineering) at the University of Kassel. The processing principle represents an alternative to the existing foam injection moulding special procedures and introduces the possibility to partially foam a component. In so doing, thin-walled, hardly foamed components with foamed ribs can be made in one processing step, thus also components with graded ...
Konferenzveröffentlichung
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Formation of morphology as a function of process control by foam injection molding of a functionally graded component
(Society of Plastics Engineers, 2014)
A special mold technology enables the production of foam injection molded components with locally differing foaming ratios. Thus, components with functionally graded foam structures can be produced in one processing step. The method (pull and foam method) is based on the idea of creating components with thin-walled areas with a high surface quality and partially foamed, thick-walled areas (e.g. with the function of integrated structural elements) in a controlled foaming process. This paper describes the characteristics ...
Konferenzveröffentlichung
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Changeable Thermal Management for LED-Lighting
(Society of Plastics Engineers, 2015)
Thermal management of LED lights can be arranged by deliberately influencing lighting components conduction capabilities and reducing the thermal contact resistance for various joining processes. The research details the possibilities thereof and shows the thermal contact resistance of plastic and
Konferenzveröffentlichung
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Development of a Radian Friction Welding Machine Using the Circular Process with Limited Rotational Motion
(Society of Plastics Engineers, 2013)
The processing-technological limitations of components which can not be continuously rotated, either due to their length or marginal protrusions, make the realization of several potential applications using rotation welding unthinkable. The difficulties that arise while generating a high quality weld and are caused by large component tolerances and component warping are known. In order to extend the potential of friction welding, it is necessary to develop a new welding technology. In cooperation with Fischer ...
Konferenzveröffentlichung
Ergebnisse und Redundanz in der Diskussion um eWOM: Eine kritische Literaturauswertung
(Universität Paderborn, 2014)
Electronic Word-Of-Mouth (eWOM) und Online Rezensionen (OR) werden als einer der Schlüsselfaktoren für erfolgreichen E-Commerce identifiziert. Jedoch sind die beeinflussenden Motivationsfaktoren für das Verfassen sowie das Lesen von OR bis heute gesamtheitlich nur unzureichend untersucht. Die vorliegende Literaturauswertung sammelt die bisherigen Forschungsergebnisse mit dem Ansatz, ein möglichst breites Bild der Motive für eWOM-Aktivitäten zu geben. Das Ergebnis der extensiven Literaturanalyse zeigt, dass für ...
Konferenzveröffentlichung
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Verbesserung der Produktqualität durch eine frühe Anforderungsvalidierung mithilfe der virtuellen Realität
(Otto-von-Guericke-Universität, Fakultät für Maschinenbau, 2015)
If features meet customer requirements to 100%, one speaks about quality. In the context of the requirement identification various methods are used to generate the conscious customer requirements. Hidden (unconscious) customer requirements are not taken into account. From collected customer requirements, however, the later features can be derived. Therefore, in the developed product it often comes to a deviation from the characteristics required by the customer. Any deviation results in a lower product quality. The ...