Suche
Anzeige der Dokumente 5161-5170 von 5203
Dissertation
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Ordoliberalism and the Making of the Economic Constitution: State, Law, and Money in the Market Economy
(2023)
The aim of my research is to explore the political economy of ordoliberalism in its historical trajectory. Beginning from the years of its inception during the interwar period, the dissertation focuses on the specific conditions and political economy of the Weimar Republic as the framework within which the ordoliberal framework was developed. Moving on to the postwar period, the dissertation examines the attempts of operationalization of the ordoliberal framework within the context of West Germany and the social ...
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
A Literature Review on Solid Waste Management and Disposal Behavior at the Base of the Pyramid
(2024-03-10)
Consumer behavior in disposing of products has substantial consequences for the environment that affect all of us. Waste management is a major challenge faced by many developing countries, underlining the relevance of this literature review. Even when academia tries to shed light on this field, it often fails to consider that waste management must be approached differently in less developed countries, which differ dramatically from advanced countries, especially with regard to consumers’ behavioral characteristics. ...
Dissertation
Biases im Planungsprozess
(2023)
Die vorliegende Arbeit befasst sich mit der Frage nach der Relevanz und der Diagnostizierbarkeit kognitiver, motivationaler und gruppendynamischer Biases im Kontext organisationaler Planungsprozesse. Ziel der Arbeit war es, einen Fragebogen zu entwickeln, der die Anfälligkeit von Gruppen für derartige Biases erfasst und damit einen Indikator für die Qualität von Planungsprozessen darstellt.
Bezüglich des Problems der Diagnostizierbarkeit impliziter Biases zeigt sich in der Literatur, dass die Organisationskultur die ...
Zeitschrift
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Journal of Agriculture and Rural Development in the Tropics and Subtropics, Heft 1, Jg. 105
(kassel university press, 2004)
Aufsatz
Characterization of Anisotropic Properties of Hot Compacted Self-Reinforced Composites (SRCs) via Thermal Diffusivity Measurement
(2019-11-01)
The mechanical properties of self-reinforced composites (SRCs) produced in a hot compaction process significantly depend on the process parameters. Only a little deviation of the process temperature or pressure causes the component to act differently under mechanical load. This is a chance and a challenge at the same time, since this process is difficult to handle but by properly controlling the process parameters, the mechanical properties can be adjusted, even locally for one component. In this research SRC are ...
Aufsatz
Joining of Contact Pins and Conductive Compounds via Injection Molding – Influence of the Flow Situation on the Electrical Contact Resistance
(2020-04-09)
While a lot of research can be found in the field of bulk resistance of carbon filled polymers, comparatively few papers focus on contact resistance between compound and metal contacts. Due to that small number of researches that deal with contact resistances, studies of the influence of injection molding conditions and parameters on the contact resistance are also very rare. In contradiction to that, these influences on bulk resistance have been studied. The objective of this work was to investigate the electrical ...
Aufsatz
A Closer Look at the Bonding Capacity of Thick Metal-Plastic Hybrids
(2019-03-01)
Metal-plastic hybrids have a lot of advantages compared to purely metal or purely plastic parts. A good design for metal-plastic hybrids can help to save weight, for example in automotive applications. Therefore, it is important to understand the joining mechanisms between both materials. Aluminum AlSi9Cu3(Fe) and polyamide 6.6 with 35 % glass fibers were used as joining partners. The materials were joined by enclosing the metal part at least partially with plastic right inside the injection molding tool. Afterwards, ...
Aufsatz
UV Pre-Treatment for Polycarbonate for Bonding LSR in a Multi-Component Injection Molding Process
(2019-03-01)
In this study, the influence of UVC radiation and the influence of ozone on the surface energy of specimens made of polycarbonate were investigated. In an additional step, the peeling resistance of silicone flaps, which were overmolded, onto pre-treated PC plates of multicomponent specimens were analyzed. For this purpose, the samples were exposed to UVC radiation for different lengths of time, ranging from 5 s to 3 600 s. To further evaluate the influence of the ozone created by the UVC in the presence of oxygen, ...
Zeitschrift
Jahresbericht 2011 / KDEE
(Universität Kassel, Kompetenzzentrum für Dezentrale Elektrische Energieversorgungstechnik (KDEE), 2012-02)
Zeitschrift
Jahresbericht 2010 / KDEE
(Universität Kassel, Kompetenzzentrum für Dezentrale Elektrische Energieversorgungstechnik (KDEE), 2011-03)