Suche
Anzeige der Dokumente 1-10 von 1741
Dissertation
Molecular Beam Epitaxial Growth of III-V Semiconductor Nanostructures on Silicon Substrates
(2013-07-24)
The main focus and concerns of this PhD thesis is the growth of III-V semiconductor nanostructures (Quantum dots (QDs) and quantum dashes) on silicon substrates using molecular beam epitaxy (MBE) technique. The investigation of influence of the major growth parameters on their basic properties (density, geometry, composition, size etc.) and the systematic haracterization of their structural and optical properties are the core of the research work. The monolithic integration of III-V optoelectronic devices with silicon ...
Aufsatz
Optical amplification and stability of spiroquaterphenyl compounds and blends
(2015)
In this contribution, we present a systematic investigation on a series of piroquaterphenyl compounds optimised for solid state lasing in the near ultraviolet (UV). Amplified spontaneous emission (ASE) thresholds in the order of 1 μJ/cm2 are obtained in neat (undiluted) films and blends, with emission peaks at 390 1 nm for unsubstituted and meta-substituted quaterphenyls and 400 4 nm for para-ether substituted quaterphenyls. Mixing with a transparent matrix retains a low threshold, shifts the emission to lower ...
Aufsatz
Finding Spaces for Urban Food Production – Matching Spatial and Stakeholder Analysis with Urban Agriculture Approaches in the Urban Renewal Area of Dortmund-Hörde, Germany
(Department of Organic Food Quality and Food Culture at the University of Kassel, Germany and Federation of German Scientists (VDW), 2015-05-20)
Using the case of an economically declined neighbourhood in the post-industrial German Ruhr Area (sometimes characterized as Germany’s “Rust Belt”), we analyse, describe and conclude how urban agriculture can be used as a catalyst to stimulate and support urban renewal and regeneration, especially from a socio-cultural perspective. Using the methodological framework of participatory action research, and linking bottom-up and top-down planning approaches, a project path was developed to include the population affected ...
Aufsatz
Comparative investigation of two-dimensional imaging methods and X-ray tomography in the characterization of microstructure
(2017-10-02)
The microstructural features of three different materials have been quantified by means of 2D image analysis and X-ray micro-computer tomography (CT) and the results were compared to determine the reliability of the 2D analysis in the material characterization. The 3D quantification of shrinkage pores and Fe-rich inclusions of an Al-Si-Cu alloy by X-ray tomography was compared with the statistical analysis of the 2D metallographic pictures and a significant difference in the results was found due to the complex ...
Dissertation
Eigenschaften chromatischer Polynome
(2015-11-02)
Die Berechnung des 1912 von Birkhoff eingeführten chromatischen Polynoms eines Graphen stellt bekanntlich ein NP-vollständiges Problem dar. Dieses gilt somit erst recht für die Verallgemeinerung des chromatischen Polynoms zum bivariaten chromatischen Polynom nach Dohmen, Pönitz und Tittmann aus dem Jahre 2003. Eine von Averbouch, Godlin und Makowsky 2008 vorgestellte Rekursionsformel verursacht durch wiederholte Anwendung im Allgemeinen einen exponentiellen Rechenaufwand. Daher war das Ziel der vorliegenden Dissertation, ...
Aufsatz
Effect of Post-Process Machining on Surface Properties of Additively Manufactured H13 Tool Steel
(2018-08-28)
Der Werkzeugstahl AISI H13 zeichnet sich durch einen hohen Verschleißwiderstand und eine gute Temperaturwechselbeständigkeit aus. Hauptanwendungsbereiche des H13 sind Druckguss- und Schmiedewerkzeuge. Die Verarbeitung von H13 durch additive Fertigungsverfahren, wie z. B. dem selektiven Laserschmelzen (selective laser melting, SLM), eröffnet neue Gestaltungsmöglichkeiten, wie z. B. die Integration interner Kühlkanäle, die es erlauben, das Einsatzverhalten der Werkzeuge zu verbessern. Aufgrund hoher Oberflächenrauheiten ...
Aufsatz
Martensite aging in ⟨001⟩ oriented Co₄₉ Ni₂₁ Ga₃₀ single crystals in tension
(2018-03-22)
Co–Ni–Ga high-temperature shape memory alloys (HT-SMAs) are well-known candidate materials for damping applications at elevated temperatures. Recent studies showed that upon heat treatment in stress-induced martensite under compressive loads transformation temperatures can be increased significantly, qualifying Co–Ni–Ga for HT-actuation. The increase in transformation temperatures is related to a change in chemical order recently validated via neutron diffraction experiments. Since SMAs show distinct tension–compression ...
Aufsatz
Electron beam welding of Fe–Mn–Al–Ni shape memory alloy: Microstructure evolution and shape memory response
(2017-07-03)
The present study reports on the impact of abnormal grain growth (AGG) on the microstructural evolution following electron beam (EB) welding of Fe–Mn–Al–Ni shape memory alloy (SMA). Polycrystalline sheet-like material was EB-welded and a cyclic heat treatment, studied in previous work, was conducted for inducing AGG and a bamboo-like microstructure, respectively. Optical and electron microscopy were carried out to characterize the prevailing microstructure upon cyclic heat treatment. For characterization of the ...
Aufsatz
Design of novel materials for additive manufacturing - Isotropic microstructure and high defect tolerance
(2018-01-22)
Electron Beam Melting (EBM) is a powder-bed additive manufacturing technology enabling the production of complex metallic parts with generally good mechanical properties. However, the performance of powder-bed based additively manufactured materials is governed by multiple factors that are difficult to control. Alloys that solidify in cubic crystal structures are usually affected by strong anisotropy due to the formation of columnar grains of preferred orientation. Moreover, processing induced defects and porosity ...
Working paper
Dienstleistungen rund um das Automobil.
(2017)
Many contributions to the history of the automobile focus on production. Instead, this paper explores various kinds of services that supports automobile drivers to use their vehicles. The service network consists of automobil dealers, the automobile workshops, fueling stations, tire dealers and garage stations as service centers. The mass production of automobiles was supplemented by mass distribution. A special structure of automobile dealers the automobile producers had to establish. The paper explores the conflicts ...