Suche
Anzeige der Dokumente 1-10 von 50
Aufsatz
Influence of the degree of crystallinity and the surface free energy on the adhesion properties of different PLA/PBS blends in multicomponent injection molding
(2020-01-10)
Biocomposites made of biodegradable polymers have grown in interest due to their environmentally friendliness, considering that non-biodegradable polymers waste conduces to pollution, displaying high environmental impact in climatic changes. Therefore, in the presented study, biodegradable Poly (lactic acid) (PLA) and poly (butylene succinate) (PBS) were investigated as a series of PLA/PBS melt-blending compounds with the weight ratios of 50/50, 60/40, 70/30, 80/20 and 90/10. In a two-component injection molding ...
Aufsatz
The influence of electric loading on crack paths in ferroelectrics
(2020-05-30)
Ferroelectric materials are widely used in our daily life and many advanced industrial products. The understanding of their fracture behavior has been in the focus of research for decades, since the success of their application requires reliability and durability. For ferroelectric fracture behavior, different fracture criteria have been proposed and the influence of various mechanical-electric loading combinations on crack propagation have been investigated. However, the crack path and the deflection of crack ...
Aufsatz
Nachhaltige Emissionsreduzierung durch erneuerbare Eigenstromversorgung
(2020-04)
Ein vielversprechender Weg der Emissionsreduktion durch Industrieunternehmen ist, selbst in erneuerbare Energieanlagen zu investieren. Die wirtschaftliche Beurteilung dieses Schrittes erfordert eine detaillierte Betrachtung der gesetzlichen Regelungen. Da es für viele Strompreisbestandteile umfangreiche Ausnahmeregelungen gibt, können die Stromkosten je nach Standort und Unternehmen variieren, sodass eine exakte Bestimmung individuell erfolgen muss.
Aufsatz
Parameter identification of crack-like notches in aluminum plates based on strain gauge data
(2020-12-31)
The identification of crack parameters and stress intensity factors in aluminum plates under tensile loading is in the focus of the presented research. In this regard, data of strain gauges, distributed along the edges of the samples, are interpreted. In the experiments, slit-shaped notches take the role of cracks located in the interior of the specimens. Their positions, inclinations and lengths as well as the magnitudes of external loadings are identified solving the inverse problems of cracked plates and associated ...
Aufsatz
Quenching of High Entropy Alloys after Annealing
(2020)
The effect of cooling rate after annealing at 900 °C on the microstructure and hardness of high entropy alloys was investigated using two typical samples with the chemical composition of Co₁₆Cr₁₄.₅Fe₂₉Mn₁₁.₅Ni₂₉ and Co₁₁.₅Cr₇Fe₂₇Mn₂₇Ni₂₇(Nb₀.₀₈C₀.₅) (at%). The microstructural characterisation and hardness measurements were carried out by optical microscopy, scanning electron microscopy, wavelength-dispersive X-ray spectroscopy, electron back scattered diffraction, X-ray diffraction technique and Vickers hardness ...
Aufsatz
On the reliability of residual stress measurements in unidirectional carbon fibre reinforced epoxy composites
(2021-03-03)
The present work introduces a novel methodology to analyse non-uniform residual stresses in composite materials. For robust determination of stresses in complex structures made of different layers, it is first necessary to prove that residual stress analysis in a single layer structure can reliably be accomplished. In present work a unidirectional carbon fibre reinforced epoxy is investigated. For residual stress determination, the integral incremental hole drilling method is used. It is revealed that the standard ...
Aufsatz
On the influence of build orientation on properties of friction stir welded AleSi10Mg parts produced by selective laser melting
(2021-04-06)
Welding and joining of components processed by additive manufacturing (AM) to other AM as well as conventionally produced components is of high importance for industry as this allows to combine advantages of either technique and to produce large-scale structures, respectively. One of the key influencing factors with respect to weldability and mechanical properties of AM components was found to be the inherent microstructural anisotropy of these components. In present work, the precipitation-hardenable Al–Si10Mg was ...
Aufsatz
Effect of Grain Statistics on Micromechanical Modeling: The Example of Additively Manufactured Materials Examined by Electron Backscatter Diffraction
(2020-02-21)
Micromechanical modeling is one of the prominent numerical tools for the prediction of mechanical properties and the understanding of deformation mechanisms of metals. As input parameters, it uses data obtained from microstructure characterization techniques, among which the electron backscatter diffraction (EBSD) technique allows us to understand the nature of microstructural features, that are usually described by statistics. Because of these advantages, the EBSD dataset is widely used for synthetic microstructure ...
Aufsatz
Effect of Tool Temperature on Mechanical Properties and Microstructure of Thermo-Mechanically Processed AA6082 and AA7075 Aluminum Alloys
(2020-06-08)
The present work focuses on the effect of thermo-mechanical processing on the mechanical properties and microstructural evolution of AA6082 and AA7075 aluminum alloys using a novel forming process, i. e. integrating solution heat treatment, hot forming and tool quenching. Different tool temperatures ranging from 24 °C to 350 °C were applied to investigate their influence on mechanical strength and ductility. By using various tool temperatures, this study aims to provide insights needed for tailoring the mechanical ...
Aufsatz
Effects of Aging under Stress on Mechanical Properties and Microstructure of EN AW 7075 Alloy
(2021-07-20)
In the present study, microstructural and mechanical properties of EN AW 7075 following stress-aging were assessed. For this purpose, properties of stress-aged samples were compared with values obtained for conventionally aged counterparts. It is revealed that the strength and hardness of EN AW 7075 can be increased by the presence of external stresses during aging. Precipitation kinetics were found to be accelerated. The effects of conventional and stress-aging on the microstructure were analyzed using synergetic ...