Suche
Anzeige der Dokumente 201-210 von 401
Dissertation
The Fatigue and Corrosion Fatigue Behavior of Austenitic Stainless Steel AISI 304 after Deep Rolling at Various Temperatures
(2019-09)
The austenitic stainless steel AISI 304 was deep rolled at 20 °C (RTDR), -195 °C (CTDR), and 550 °C (HTDR). The deep rolling pressures used for each deep rolling temperature were 1.0, 1.7, and 2.4 bar. From microstructural investigation, the largest compressive residual stress field was found in RTDR, and the highest amount of martensitic content and plastic deformation were found in CTDR. The strain aging effect was only found in HTDR.
In the rotating bending fatigue tests, the strain aging effect after HTDR is ...
Aufsatz
Effect of Cell Morphology on Flexural Behavior of Injection-Molded Microcellular Polycarbonate
(2022-05-19)
The quantitative study of the structure and properties relationship in cellular materials is mostly limited to cell diameter, cell density, skin layer thickness, and cell size distribution. In addition, the investigation of the morphology is generally carried out in two dimensions. Therefore, the
interrelation between morphological properties and mechanical characteristics of the foam structure has remained in an uncertain state. In this study, during the physical foaming process, a foam morphology is locally created ...
Aufsatz
Mechanics of colloidal supraparticles under compression
(2021-10-13)
Colloidal supraparticles are finite, spherical assemblies of many primary particles. To take advantage of their emergent functionalities, such supraparticles must retain their structural integrity. Here, we investigate their size-dependent mechanical properties via nanoindentation. We find that the deformation resistance inversely scales with the primary particle diameter, while the work of deformation is dependent on the supraparticle diameter. We adopt the Griffith theory to such particulate systems to provide a ...
Aufsatz
On data-driven nonlinear uncertainty modeling: Methods and application for control-oriented surface condition prediction in hard turning
(2020-10-16)
In this article, two data-driven modeling approaches are investigated, which allow an explicit modeling of uncertainty. For this purpose, parametric Takagi-Sugeno multi-models with bounded-error parameter estimation and nonparametric Gaussian process regression are applied and compared. These models can for instance be used for robust model-based control design. As an application, the prediction of residual stresses during hard turning depending on the machining parameters and the initial hardness is considered.
Aufsatz
Hydrogen absorption of ultra-high strength aluminum-silicon coated 22MnB5 steels
(2022-12-30)
The hot forming process allows to produce safety-relevant structural components in the automotive industry with strengths of 1500 MPa and higher. Generally, high strengths make material sensitive to hydrogen embrittlement. The heat treatment in the hot forming process chain is a potential source of diffusible hydrogen for hot-dipped aluminum-silicon coated boron-manganese steels. In the present work, the influence of different process gases and furnace dwell times during the heat treatment was investigated. Humidified ...
Dissertation
Konzeption, Implementierung und Anwendung eines automatisierten aerothermodynamischen Vorentwurfsprozesses für Axialturbinen
(2016-07-06)
In dieser Arbeit wird ein Prozess für den frühen aerothermodynamischen Entwurf von Axialturbinen konzipiert und durch Kopplung einzelner Computerprogramme im DLR Göttingen realisiert. Speziell für die Erstauslegung von Geometrien und die Vorhersage von globalen Leistungsdaten beliebiger Axialturbinen wurde ein neues Programm erzeugt. Dessen effiziente Anwendung wird mit einer zu diesem Zweck konzipierten grafischen Entwurfsumgebung ausgeführt. Kennzeichnend für den Vorentwurfsprozess in dieser Arbeit ist die Anwendung ...
Masterarbeit
Free decay testing of a semisubmersible offshore floating platform for wind turbines in model scale
(2017-12-20)
Wind turbines can be installed on floating platforms in order to use wind resources, which blow above the deep sea. The presented research investigates the hydrodynamic behaviour of the Olav Olsen Concrete Star floater in free decay motion. The floater is a new design of a semisubmersible offshore floating platform for wind turbines. The thesis describes the physical free decay testing of a 1/40 plastic scale model in a water basin as well as numerical simulations of the same test cases with the aero-hydro-servo-elastic ...
Dissertation
Materialverhalten von Metallen im Rahmen der anisotropen Viskoplastizität
(kassel university press, 2004-12)
Ausgehend von den Grundlagen der Kontinuumstechnik, den Prinzipien der Materialtheorie und der Mirkomechanik von Metallen, stellt die Dissertationsschrift die Entwicklung eines Materialmodells dar, welches in die Kategorie der anisotropen Viskoplastizität einzuordnen ist. Das Modell basiert auf einem Ansatz für die Freie Energie, besitzt volle Invarianzeigenschaften und ist a priori thermodynamisch konsistent. Dabei werden die Achsen der elastischen Anisotropie, welche einen definierten Zusammenhang zur Lage der ...
Diplomarbeit
Unterstützung suboptimaler Regelkreise durch eine zentrale Korrektursteuerung
(2006-04-03)
Evolutionäre Algorithmen werden gerne für Optimierungsaufgaben mit sehr vielen Freiheitsgraden eingesetzt. Eine spezielle Konvergenzeigenschaft, daß nämlich der Rechenaufwand nur mit der Wurzel der Anzahl der Unbekannten steigt, prädestiniert sie dafür. Die evolutionären Algorithmen haben aber auch noch eine weitere interessante Eigenschaft: Von der Zielfunktion wird nur verlangt, daß sie monoton ist - nichts weiter. Speziell wird, im Gegensatz zu gradientenbasierten Verfahren, keinerlei Ableitung von der Zielfunktion ...
Dissertation
Die Gestaltung gesunder und effektiver digital vermittelter Kommunikation im Kontext von Remote Leadership – eine Betrachtung unter Berücksichtigung des Aspektes der psychologisch sicheren Kommunikation
(2023)
Einhergehend mit einer fortschreitenden Globalisierung und Digitalisierung nimmt auch die Verbreitung von Remote Leadership, auf Distanz vermittelter Führungs- und Kommunikationsprozesse, seit mehreren Jahren stetig zu; im Zuge der Covid-19-Pandemie hat sich diese Entwicklung nochmals beschleunigt. Unternehmen, die angesichts eines internationalen Wettbewerbs mit einem wachsenden Innovations- und Optimierungsdruck konfrontiert sind, müssen in der modernen Arbeitswelt, wollen sie wettbewerbsfähig und erfolgreich ...