Suche
Anzeige der Dokumente 1-10 von 11
Aufsatz
Crack Paths at Multiple-crack Systems in Anisotropic Simulation and Experiment
(2014-06-27)
This paper is targeted on numerical methods for accurate crack tip loading analysis and crack path prediction. Those are based on finite element calculations of the boundary value problem. Applying path-independent integrals to curved cracks in order to accurately calculate the J-integral, energy release rate (ERR) or stress intensity factors (SIF) is still not state of the art. Contours which are not confined to the crack tip require special analytical preparation and numerical treatment to supply results which are ...
Aufsatz
Numerical Two-Scale Simulations of Damage Evolution at Refractory Materials
(2014-02-25)
Fracture and damage processes on micro- and mesoscale are combined with macroscale simulations applying numerical multiscale approaches. Cracks and grain boundaries are reproduced in cell models that take account of transand intercrystalline crack growth. The global, in general thermomechanical boundary value problem is considered within a continuum mechanics framework. Two approaches are presented combining the scales. Simple processes on the smaller level are described in analytical models including the damage ...
Dissertation
Ermüdungsschädigung in gealterten Gasturbinenschaufeln
(2014-09-02)
Im Rahmen der vorliegenden Arbeit wird die bauteil- und alterungsabhängige Rissausbreitung in Gasturbinenschaufeln der polykristallinen Gusslegierung Inconel 738LC sowohl bei Raumtemperatur als auch bei 700°C analysiert. Für die Untersuchungen stand eine Sammlung von geometrisch gleichen Gasturbinenschaufeln mit unterschiedlich langen Einsatzzeiten in Kraftwerken zur Verfügung.
Durch eine Gefüge- und Rissanalyse an den vorliegenden Turbinenschaufeln wird gezeigt, dass die Rissausbreitung unter thermischer und ...
Konferenzveröffentlichung
Assessment of the changeability of plastics processing systems
(Society of Plastics Engineers, 2014)
Changeable production systems are still being developed, especially in the field of plastics processing. Here, the assessment of the changeability is a decisive factor. This investigation deals with the assessment of the changeability of a modular pilot plant, and derives approaches for the further development of an evaluation system, as well as potential means to increase the changeability.
Konferenzveröffentlichung
Formation of morphology as a function of process control by foam injection molding of a functionally graded component
(Society of Plastics Engineers, 2014)
A special mold technology enables the production of foam injection molded components with locally differing foaming ratios. Thus, components with functionally graded foam structures can be produced in one processing step. The method (pull and foam method) is based on the idea of creating components with thin-walled areas with a high surface quality and partially foamed, thick-walled areas (e.g. with the function of integrated structural elements) in a controlled foaming process. This paper describes the characteristics ...
Konferenzveröffentlichung
Hybrid composite materials made of polypropylene with wood and polyethylene terephthalate fibers
(Society of Plastics Engineers, 2014)
We aim to manufacture injection molded components which consist of thermoplastics reinforced with fibers and which have improved properties (high strength and high notched impact strength). Thus, we intend to access new application fields for the not readily visible area of the automobile interior.
Dissertation
Sensordatenfusionsansätze in der Thermografie zur Verbesserung der Messergebnisse
(kassel university presskassel university press, 2014)
Thermografie hat sich als wichtiges Hilfsmittel für die Inspektion, Prüfung und Überwachung etabliert. Bei vielen Anwendungen ist eine einzelne Messung allein oft nicht aussagekräftig, z. B. weil Strukturen nicht deutlich genug wahrgenommen werden können, das Messobjekt größer als das Blickfeld der Optik ist oder sich Kenngrößen erst aus dem zeitlichen Verlauf von Messungen ergeben. Zudem erfasst der Bediener der Kamera mit seinen Sinnen und seiner Erfahrung noch viele weitere Einflussgrößen, die bei der Entscheidungsfindung ...
Aufsatz
The Manufacture of Hot-Compacted Layered Composite Systems Made of Oriented Semifinished PP-Films
(2014-03-04)
Monoaxial stretched PP-films are used for the manufacture of hot-compacted layered composites. These are layered with stretched co-extruded coupling agent films, and are consolidated to laminates by means of a hot-compaction process, which employs pressure and temperature. This paper aims to examine the influence of the process settings on the properties of the composites during the hot-compaction process. For this purpose, the mechanical values will be determined by means of tensile testing variously compacted and ...
Dissertation
Numerische Modellierung von Fluid-Struktur-Wechselwirkungen an wellenbeaufschlagten Strukturen
(kassel university press, 2014)
Die vorliegende Arbeit behandelt die numerische Modellierung von Fluid-Struktur-Wechselwirkung (FSI) an wellenbeaufschlagten Strukturen mittels eines partitionierten Block-Gauß-Seidel-Lösungsverfahrens. Die Berechnung der Teilpartitionen der multiregionalen bzw. multiphysikalischen Berechnungsfelder basiert dabei auf der numerischen Finite-Volumen-Methode (FVM). Das Hauptaugenmerk der Arbeit liegt auf der Entwicklung eines Fluid-Struktur-Wechselwirkungs-Algorithmus zur Untersuchung von dämpfungsbegünstigten Eigenschaften ...
Dissertation
Materialmodellierung für die simultane Kalt-/Warmumformung auf Basis erweiterter rheologischer Modelle
(kassel university press, 2014)