Suche
Anzeige der Dokumente 1-10 von 13
Aufsatz
Weak and strong bi-material interfaces and their influence on propagating cracks in plane elastic structures
(2017-09-06)
The developing crack paths in heterogeneous structures are the result of the inhomogeneous state of stress. The latter stems from e.g. voids or inclusions in an elastic matrix, which are bonded either by strong or weak interfaces. Besides the stiffness of an inclusion, the kind of interface has a decisive influence on the state of stress and therefore on propagating cracks. It is experimentally proven that cracks tend to grow towards regions with lower stiffness (Tilbrook et al., 2006; Judt et al., 2015), therefore ...
Aufsatz
Process and utility systems integration and optimisation for ultra-low energy milk powder production
(2017-04-26)
This study applies a Total Site Heat Integration approach in conjunction with a detailed process and utility model, to develop an innovative ultra-low energy milk powder plant design. The basis for the analysis is a state-of-the-art modern milk powder plant that requires 5265 MJ/tp of fuel and 210.5 kWh/tp (58.5 MJe/tp) of electricity. The model of the modern milk powder plant was validated against industrial data and changes to process and/or utility systems are targeted and implemented into the model to understand ...
Aufsatz
Assessment of probabilistic distributed factors influencing renewable energy supply for hotels using Monte-Carlo methods
(2017-04-05)
This paper investigates the use of renewable energies to supply hotels in island regions. The aim is to evaluate the effect of weather and occupancy fluctuations on the sensitivity of investment criteria. The sensitivity of the chosen energy system is examined using a Monte Carlo simulation considering stochastic weather data, occupancy rates and energy needs. For this purpose, algorithms based on measured data are developed and applied to a case study on the Canary Islands.
The results underline that electricity ...
Aufsatz
Fabrication and characterization of ethylene–octene copolymer composites with ionic liquid functionalized carbon nanotubes
(2017-10-16)
Modification of multi-walled carbon nanotubes (MWCNTs) by means of imidazolium ionic liquid (IL) was performed. Structural characterization of funtionalized nanofillers (IL-f-MWCNTs) was made by means of Raman spectroscopy and transmission electron microscopy. MWCNTs and IL-f-MWCNTs were introduced within ethylene octane copolymer (EOC) with octene co-monomer content of 17% by using the masterbatch approach. The efficiency of the carbonaceous nanofiller distribution within the polymer matrix was characterized by means ...
Aufsatz
Crack path predictions in fiber reinforced composites
(2017-09-06)
Composite materials exhibit beneficial features compared to conventional engineering material, e.g. a comparable strength and a reduced weight at the same time. To fully exploit these beneficial properties within technical structures, fracture mechanical concepts must be taken into account. The global fracture behavior in composite materials is related to the local delamination at interfaces between matrix and inclusion as well as the local fracture behaviors of the constituents. Because of their structure, the global ...
Aufsatz
An extended constitutive model for nonlinear reversible ferromagnetic behaviour under magnetomechanical multiaxial loading conditions
(2017-02-01)
A constitutive modelling of ferromagnetic materials under combined magnetomechanical multiaxial loading with different boundary conditions and a finite element implementation are presented. The phenomenologically motivated model is capable of predicting magnetisation, strain, and stress and is thus suitable, e.g., for applications in multiferroic composites. The approach covers a reversible nonlinear behaviour as it is observed, e.g., in cobalt ferrite and other soft magnetic alloys. Various examples demonstrate the ...
Aufsatz
Grundsatzfragen der Abwärmenutzung
(2017-04)
In der Diskussion zum Thema Energieeffizienz wird regelmäßig über Abwärmenutzungstechnologien (AbWT) wie Sorptionskältemaschinen, Organic-Rankine-Cycle-Prozesse (ORC) oder Wärmepumpen diskutiert. Diese sollen eine praktikable Nutzung von Abwärme ermöglichen. Im Sinne eines Plug & Play Systems erfolgt die Ankopplung an eine Abwärmequelle und eine andere Nutzenergieform wie Strom, Kälte oder Hochtemperaturwärme kann an geeigneter Stelle wieder in den Prozess integriert werden. Doch wie lassen sich Abwärmequellen und ...
Aufsatz
Optimal energy supply structures for industrial food processing sites in different countries considering energy transitions
(2017-05-10)
This study focuses on analysing the most energy efficient utility system supply structure in terms of carbon emissions, primary energy efficiency and energy costs. In the German food processing industry, the state-of-the-art technologies in the utility supply structure are a gas fired steam boiler for steam generation and ammonia chillers for chilled water generation. Low investment costs and its durability are attractive for industrial production sites. But, given the ongoing energy transition to renewable energy, ...
Aufsatz
Comparative investigation of two-dimensional imaging methods and X-ray tomography in the characterization of microstructure
(2017-10-02)
The microstructural features of three different materials have been quantified by means of 2D image analysis and X-ray micro-computer tomography (CT) and the results were compared to determine the reliability of the 2D analysis in the material characterization. The 3D quantification of shrinkage pores and Fe-rich inclusions of an Al-Si-Cu alloy by X-ray tomography was compared with the statistical analysis of the 2D metallographic pictures and a significant difference in the results was found due to the complex ...
Aufsatz
Electron beam welding of Fe–Mn–Al–Ni shape memory alloy: Microstructure evolution and shape memory response
(2017-07-03)
The present study reports on the impact of abnormal grain growth (AGG) on the microstructural evolution following electron beam (EB) welding of Fe–Mn–Al–Ni shape memory alloy (SMA). Polycrystalline sheet-like material was EB-welded and a cyclic heat treatment, studied in previous work, was conducted for inducing AGG and a bamboo-like microstructure, respectively. Optical and electron microscopy were carried out to characterize the prevailing microstructure upon cyclic heat treatment. For characterization of the ...