Suche
Anzeige der Dokumente 1-8 von 8
Konferenzveröffentlichung
Controlled magnetic devices in power electronic applications
(IEEE, 2017)
Almost all power electronic converters require magnetic devices and some properties of the converters can be controlled with magnetics. New magnetic materials enable implementation of magnetic control of converters also in high switching frequency applications. The presented paper gives an overview about controllability of magnetic devices in theory and practice, simulation approaches and examples. The focus is on electrically controllable magnetic devices. This means that an additional control winding is wound on ...
Konferenzveröffentlichung
Design of Photovoltaic Microinverter for Off-Grid and Grid-Parallel Applications
(VDE Verlag, 2014)
The design and construction of a 500VA microinverter for photovoltaic applications is presented. The developed microinverter is capable of operating as a standalone AC voltage source for small loads or, alternatively, as a grid-parallel system. Possible applications are therefore small off-grid installations as well as installations where space constraints do not allow enough modules to be combined to use string inverters. The design of the microinverter is based on a two stage concept. Two alternative topologies for ...
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Review of Flux Interaction of Differently Aligned Magnetic Fields in Inductors and Transformers
(2020-12-24)
Magnetic devices are used in the majority of power electronic applications, e.g. power electronic converters, mains filters or burst/surge protection. Typically, they are the bulkiest and most cost-intensive components. Flux interaction of differently aligned magnetic fields in inductors and transformers can be one opportunity for size and cost reduction. It enables controllable magnetic devices through an additional manipulated variable to improve application design. The presented article gives an overview about ...
Konferenzveröffentlichung
Interleaved Buck Converter with Coupled Inductors as Auxiliary Bias-Current Source for Controllable Magnetic Devices
(VDE Verlag, 2020-08-26)
This paper presents an Interleaved Buck Converter with Coupled Inductors as a DC-Bias Current Source for Controllable Magnetic Devices, the modular interleaved Buck system supplies a low-ripple current for the auxiliary DC-bias winding of a controllable inductor with different biasing winding disposition in relationship with the main operating flux of the inductor. A 4-phase interleaved Buck converter system was built and inductance measurements where made for different operating current values of the DC-bias and the ...
Konferenzveröffentlichung
A GaN-based DC/DC converter for e-vehicles applications
(IEEE, 2020)
This paper presents a 4 kW GaN-based galvanically isolated bidirectional DC/DC converter suitable for on-board auxiliary power supply systems, interconnecting the HV battery with the LV power system. To enable the trend towards higher levels of electrification, a second LV level of 48 V is introduced to supply the high-power consumers, relieving the 12 V grid on the one hand and/or avoiding using additional costly isolated converters connected to the HV batteries on the other. The built converter prototypes aim to ...
Konferenzveröffentlichung
Impact of implementation of auxiliary bias-windings on controllable inductors for power electronic converters
(IEEE, 2020)
Magnetic devices are an important part of electronic converters. They can be used to control some properties of the converters. There are three different control methods using an auxiliary bias-winding. In the presented paper, the impact of the implementation of the auxiliary bias-winding was studied for mixed biasing. Seven different designs were investigated in small signal measurements and 3D-FEM-simulations. The results were proven by calculated results of equivalent diagram circuits, which have been developed. ...
Konferenzveröffentlichung
Weight reduction of DC/DC converters using controllable inductors
(VDE Verlag, 2019-07)
Controllable inductors can be realized by introducing auxiliary windings into the device that partially saturate the core and allow variation of the inductance value. This can be used to achieve zero-voltage switching in a DC/DC converter over a wide load range while at the same time the weight of the inductor is reduced. In this paper the possible size and weight reduction and the influence on the efficiency is calculated and compared to other solutions. The results are verified in a prototype.
Working paper
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Verbundvorhaben "HELENE" - Hocheffiziente, langlebige und kompakte Leistungselektronik auf GaN-Basis für die Elektromobilität der Zukunft
(2020)
Die vom Fachgebiet Elektrische Energieversorgungssysteme (EVS) am Kompetenzzentrum für Dezentrale Elektrische Energieversorgungstechnik (KDEE) der Universität Kassel durchgeführten und in diesem Bericht vorgestellten Arbeiten haben einen Beitrag zum Verbundvorhaben „Hocheffiziente, langlebige und kompakte Leistungselektronik auf GaN-Basis für die Elektromobilität der Zukunft“ (HELENE) geleistet. Ziel des Gesamtvorhabens war die Untersuchung der Einsatzfähigkeit und die Bewertung und Demonstration von Gewichts- und ...