Suche
Anzeige der Dokumente 11-20 von 21
Dissertation
Large Numerical Models in Continuous Hybrid Simulation
(2016-10-20)
Hybrid simulation is a technique that combines experimental and numerical testing and has been used for the last decades in the fields of aerospace, civil and mechanical engineering. During this time, most of the research has focused on developing algorithms and the necessary technology, including but not limited to, error minimisation techniques, phase lag compensation and faster hydraulic cylinders. However, one of the main shortcomings in hybrid simulation that has pre- vented its widespread use is the size of the ...
Dissertation
Classification of recycled sands and their applications as fine aggregates for concrete and bituminous mixtures
(2005-09-06)
As a result of the drive towards waste-poor world and reserving the non-renewable materials, recycling the construction and demolition materials become very essential. Now reuse of the recycled concrete aggregate more than 4 mm in producing new concrete is allowed but with natural sand a fine aggregate while. While the sand portion that represent about 30\% to 60\% of the crushed demolition materials is disposed off. To perform this research, recycled concrete sand was produced in the laboratory while nine recycled ...
Dissertation
Influence of Calcium Aluminate Cement and Ground Granulated Blast Furnace Slag on the Synthesis of Rice Husk Ash-Based Geopolymer Mortars
(2018-02-26)
The manufacture of Portland cement is energy intensive and is associated with carbon dioxide emission of approximately 7% of total global emission. The process also produces pollution in the forms of dust, noise, and vibration with operating machinery during blasting in quarries. Geopolymer material is formed through the reaction of silica and alumina oxides with alkali activator and has appeared as a viable alternative to the Portland cement in the construction field due to good properties such as high compressive, ...
Dissertation
Ein Beitrag zur realitätsnahen Modellierung und Analyse von stahlfaserverstärkten Stahlbeton- und Stahlbetonflächentragwerken
(2003-12-04)
Das Werkstoffverhalten von stahlfaserfreiem bzw. stahlfaserverstärktem Stahlbeton unter biaxialle Druck- Zugbeanspruchung wurde experimentell und theoretisch untersucht. Die Basis der experimentellen Untersuchungen waren zahlreiche Versuche, die in der Vergangenheit an faserfreiem Stahlbetonscheiben zur Bestimmung des Werkstoffverhaltens von gerissenem Stahlbeton im ebenen Spannungszustand durchgeführt wurden. Bei diesen Untersuchungen wurde festgestellt, dass infolge einer Querzugbeanspruchung eine Abminderung der ...
Dissertation
Virtual portfolios for earthquake insurance related risk simulations
(2018-04-05)
Seismic Risk, a combination of Hazard, Vulnerability and Loss, is becoming a mainstream topic due to an increase in the losses and damage caused by earthquake related effects worldwide.
Therefore, it has become an important aspect for insurer and reinsurers since it is extremely difficult to assess due to the lack of the necessary data compared, for example, to car insurance (chapter 1). As described in chapter 2, where the state of the art of seismic risk assessment and simulation is described alongside a more ...
Dissertation
Untersuchung der Verstärkung bestehender Stahlbetonkonstruktionen unter Nutzung Ultrahochfesten Betons (UHPC) im Vergleich zu herkömmlichen Verstärkungsmaßnahmen
(2017-12-07)
Aufgrund des hohen Anteils instandsetzungsbedürftiger Gebäude in Syrien spielen Verstärkungsmaßnahmen eine große Rolle im Bauingenieurwesen. Dabei wird den wirtschaftlichen Aspekten besondere Bedeutung beigemessen. Maßnahmen der Gebäudeverstärkung beruhen in Syrien fast nur auf dem Verfahren der Verstärkung durch Stahlbauteile. Für die Verstärkung und Sanierung bestehender Bauwerke und Bauteile sind in Deutschland verschiedene Methoden, wie z. B. Anbringen zusätzlicher Stahlprofile, Kleben von Stahl-, CFK- oder ...
Dissertation
Überwachung der Vorspannkraft Externer Spannglieder mit Hilfe der Modalanalyse
(2006-05-15)
Aufgrund ihrer Vorteile hinsichtlich Dauerhaftigkeit und Bauwerkssicherheit ist in Deutschland seit 1998 die externe Vorspannung in Hohlkastenbrücken zur Regelbauweise geworden. Durch Verwendung der austauschbaren externen Vorspannung verspricht man sich im Brückenbau weitere Verbesserungen der Robustheit und damit eine Verlängerung der Lebensdauer. Trotz des besseren Korrosionsschutzes im Vergleich zur internen Vorspannung mit Verbund sind Schäden nicht völlig auszuschließen. Um die Vorteile der externen Vorspannung ...
Dissertation
Seismic behavior of capacity designed masonry walls in low seismicity regions
(2006-11-07)
Eurocode 8 representing a new generation of structural design codes in Europe defines requirements for the design of buildings against earthquake action. In Central and Western Europe, the newly defined earthquake zones and corresponding design ground acceleration values, will lead in many cases to earthquake actions which are remarkably higher than those defined so far by the design codes used until now in Central Europe.
In many cases, the weak points of masonry structures during an earthquake are the corner ...
Dissertation
Verbesserung der seismischen Kapazität von Mauerwerkswänden durch Verwendung von Elastomerlagern
(2011-02-21)
Ein großer Teil der Schäden wie auch der Verluste an Gesundheit und Leben im Erdbebenfall hat mit dem frühzeitigen Versagen von Mauerwerksbauten zu tun. Unbewehrtes Mauerwerk, wie es in vielen Ländern üblich ist, weist naturgemäß einen begrenzten Erdbebenwiderstand auf, da Zugspannungen und Zugkräfte nicht wie bei Stahlbeton- oder Stahlbauten aufgenommen werden können.
Aus diesem Grund wurde bereits mit verschiedenen Methoden versucht, die Tragfähigkeit von Mauerwerk im Erdbebenfall zu verbessern. Modernes Mauerwerk ...
Dissertation
Generic Finite Element Model for Mechanically Consistent Scaling of Composite Beam-to-column Joint with Welded Connection
(2013-06-26)
To study the behaviour of beam-to-column composite connection more sophisticated finite element models is required, since component model has some severe limitations. In this research a generic finite element model for composite beam-to-column joint with welded connections is developed using current state of the art local modelling. Applying mechanically consistent scaling method, it can provide the constitutive relationship for a plane rectangular macro element with beam-type boundaries. Then, this defined macro ...