Search
Now showing items 51-60 of 78
Konferenzveröffentlichung
Pull and Foam - Injection moulding method: Foamed ribs for stiffening plane components
(Society of Plastics Engineers, 2012)
The pull and foam method is a foam injection moulding method which is currently being developed at the Institut für Werkstofftechnik (IfW) (Institute of Materials Engineering) at the University of Kassel. The processing principle represents an alternative to the existing foam injection moulding special procedures and introduces the possibility to partially foam a component. In so doing, thin-walled, hardly foamed components with foamed ribs can be made in one processing step, thus also components with graded ...
Konferenzveröffentlichung
Formation of morphology as a function of process control by foam injection molding of a functionally graded component
(Society of Plastics Engineers, 2014)
A special mold technology enables the production of foam injection molded components with locally differing foaming ratios. Thus, components with functionally graded foam structures can be produced in one processing step. The method (pull and foam method) is based on the idea of creating components with thin-walled areas with a high surface quality and partially foamed, thick-walled areas (e.g. with the function of integrated structural elements) in a controlled foaming process. This paper describes the characteristics ...
Konferenzveröffentlichung
Changeable Thermal Management for LED-Lighting
(Society of Plastics Engineers, 2015)
Thermal management of LED lights can be arranged by deliberately influencing lighting components conduction capabilities and reducing the thermal contact resistance for various joining processes. The research details the possibilities thereof and shows the thermal contact resistance of plastic and
Konferenzveröffentlichung
Development of a Radian Friction Welding Machine Using the Circular Process with Limited Rotational Motion
(Society of Plastics Engineers, 2013)
The processing-technological limitations of components which can not be continuously rotated, either due to their length or marginal protrusions, make the realization of several potential applications using rotation welding unthinkable. The difficulties that arise while generating a high quality weld and are caused by large component tolerances and component warping are known. In order to extend the potential of friction welding, it is necessary to develop a new welding technology. In cooperation with Fischer ...
Dissertation
Effect of heat treatment and iron content on the microstructure and mechanical properties of a secondary Al-Si-Cu alloy
(2019-05)
In this work the effect of heat treatments on the microstructure and mechanical properties of a secondary Al-Si-Cu alloy is studied. A Design of Experiments (DoE) was developed in order to optimize the heat treatment parameters and analyze the dissolution and fragmentation of the iron-rich inclusions as well as the improvement of the mechanical properties by non-equilibrium heat treatments. The iron-rich intermetallic inclusions were characterized as-cast and after heat treatment both by two-dimensional metallography ...
Aufsatz
Time-of-Flight Three Dimensional Neutron Diffraction in Transmission Mode for Mapping Crystal Grain Structures
(2017-08-25)
The physical properties of polycrystalline materials depend on their microstructure, which is the nano- to centimeter scale arrangement of phases and defects in their interior. Such microstructure depends on the shape, crystallographic phase and orientation, and interfacing of the grains constituting the material. This article presents a new non-destructive 3D technique to study centimeter-sized bulk samples with a spatial resolution of hundred micrometers: time-of-flight three-dimensional neutron diffraction (ToF ...
Buch
Rotatives Vibrationsschweißen
(kassel university press, 2017)
Schweißversuche mit den von dem Schweißmaschinenhersteller Fischer Kunststoff-Schweißtechnik GmbH entwickelten Prototypenmaschinen für das neuartige Rotative Vibrationsschweißen zeigen eine vergleichbare erforderliche Prozessführung und die bereits bekannten Ausprägungen der vier Schweißprozessphasen anderer Vibrationsschweißverfahren. Unter Verwendung unterschiedlicher Werkstoffe und Probekörpergeometrien zeigt sich, dass sich die Fügenahteigenschaften von mit dem Rotativen Vibrationsschweißverfahren gefügten ...
Buch
Struktur-Eigenschafts-Beziehung von Mischungen aus thermoplastischem PMMA mit vernetzten PMMA-Kolloiden
(kassel university press, 2016)
Ziel dieser Arbeit war es, ein Compound aus Partikeln aus untereinander vernetzten Polymerketten, sogenannten Kolloiden, und thermoplastischem Matrixmaterial basierend auf dem gleichen Monomer (MMA) aus ingenieurwissenschaftlicher Sicht zu charakterisieren und die Struktur-Eigenschafts-Beziehungen zu klären. Durchgeführt wurden die Untersuchungen an Compounds mit Kolloiden mit verschiedenen Größen, Vernetzungsgraden und Anteilen, die zunächst in Benzol mit dem Matrixmaterial, Plexiglas® 6N, vermischt wurden.
Neben ...
Aufsatz
Injection molded components with functionally graded foam structures – Procedure and essential results
(2015-02-13)
In the past few years, foam injection molding has increasingly gained significance in the field of technical plastic components. This is due to the development of new processes and processing combinations and efforts to produce lightweight products. In this article, a special tool technology will be introduced, which aids the process of expanding the existing areas of applications. The technology enables the production of foam injection molded components with different foaming ratios. This is made possible by core ...