Suche
Anzeige der Dokumente 1-10 von 19
Dissertation
Einfluss mesoskopischer und mikroskopischer Phasenverteilungen auf das Wachstumsverhalten physikalisch kurzer Risse
(2017-09-28)
Im Rahmen der vorliegenden Arbeit wird der Einfluss der meso- und mikroskopischen Phasenverteilung auf das Wachstumsverhalten physikalisch kurzer Risse unter Ermüdungsbelastung in metallischen Werkstoffen untersucht. Dazu werden physikalisch kurze Risse in einem Stahl und einer Aluminiumlegierung gezielt initiiert und bei einer definierten Belastung wachsen gelassen,
um die Interaktion des Risses mit den unterschiedlichen Phasenverteilungen analysieren zu können.
Zur Analyse des mesoskopischen Phaseneinflusses ...
Dissertation
Bruchmechanische Charakterisierung physikalisch kleiner Ermüdungsrisse
(2017-05-05)
Im Rahmen dieser Arbeit wurden das Wachstumsverhalten und der Belastungszustand physikalisch kleiner Ermüdungsrisse bei mechanisch monotoner und zyklischer Belastung unter Berücksichtigung der Mikrostruktur in-situ untersucht.
Das Wachstumsverhalten kleiner Risse hat im Bereich der bruchmechanischen Rissanalyse in der jüngsten Vergangenheit ein besonderes Interesse erfahren, vor allem weil diese Risse einen wesentlichen Anteil der Lebensdauer ausmachen. Kleine Risse in der Größenordnung der Mikrostruktur (Korngrößen, ...
Konferenzveröffentlichung
The Adhesion of LSR Thermoplastic Composites after Storage Tests
(Society of Plastics Engineers, 2017)
The adhesion properties of liquid silicone rubber (LSR) and different thermoplastics (PC, PA, and PP) were examined in this investigation. In order to guarantee the adhesion of both components, an activation (silicatization) of the TP surface, which is a conventional method, was carried out. Furthermore, the long-term stability of the silicatization (storage of the activated surfaces) as well as the wetting behavior were investigated. Moreover, microscopic investigations were performed to analyze the activated ...
Aufsatz
Crack path predictions in fiber reinforced composites
(2017-09-06)
Composite materials exhibit beneficial features compared to conventional engineering material, e.g. a comparable strength and a reduced weight at the same time. To fully exploit these beneficial properties within technical structures, fracture mechanical concepts must be taken into account. The global fracture behavior in composite materials is related to the local delamination at interfaces between matrix and inclusion as well as the local fracture behaviors of the constituents. Because of their structure, the global ...
Aufsatz
Comparative investigation of two-dimensional imaging methods and X-ray tomography in the characterization of microstructure
(2017-10-02)
The microstructural features of three different materials have been quantified by means of 2D image analysis and X-ray micro-computer tomography (CT) and the results were compared to determine the reliability of the 2D analysis in the material characterization. The 3D quantification of shrinkage pores and Fe-rich inclusions of an Al-Si-Cu alloy by X-ray tomography was compared with the statistical analysis of the 2D metallographic pictures and a significant difference in the results was found due to the complex ...
Aufsatz
Electron beam welding of Fe–Mn–Al–Ni shape memory alloy: Microstructure evolution and shape memory response
(2017-07-03)
The present study reports on the impact of abnormal grain growth (AGG) on the microstructural evolution following electron beam (EB) welding of Fe–Mn–Al–Ni shape memory alloy (SMA). Polycrystalline sheet-like material was EB-welded and a cyclic heat treatment, studied in previous work, was conducted for inducing AGG and a bamboo-like microstructure, respectively. Optical and electron microscopy were carried out to characterize the prevailing microstructure upon cyclic heat treatment. For characterization of the ...
Aufsatz
Time-of-Flight Three Dimensional Neutron Diffraction in Transmission Mode for Mapping Crystal Grain Structures
(2017-08-25)
The physical properties of polycrystalline materials depend on their microstructure, which is the nano- to centimeter scale arrangement of phases and defects in their interior. Such microstructure depends on the shape, crystallographic phase and orientation, and interfacing of the grains constituting the material. This article presents a new non-destructive 3D technique to study centimeter-sized bulk samples with a spatial resolution of hundred micrometers: time-of-flight three-dimensional neutron diffraction (ToF ...
Buch
Rotatives Vibrationsschweißen
(kassel university press, 2017)
Schweißversuche mit den von dem Schweißmaschinenhersteller Fischer Kunststoff-Schweißtechnik GmbH entwickelten Prototypenmaschinen für das neuartige Rotative Vibrationsschweißen zeigen eine vergleichbare erforderliche Prozessführung und die bereits bekannten Ausprägungen der vier Schweißprozessphasen anderer Vibrationsschweißverfahren. Unter Verwendung unterschiedlicher Werkstoffe und Probekörpergeometrien zeigt sich, dass sich die Fügenahteigenschaften von mit dem Rotativen Vibrationsschweißverfahren gefügten ...