Suche
Anzeige der Dokumente 21-30 von 38
Konferenzveröffentlichung
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Flexible Foams made of Liquid Silicone Rubber and expandable Microspheres
(2019-10-02)
In this study, the possibility of foaming liquid silicone rubber (LSR) was investigated. The foam was produced by injection molding with two different thermoplastic, expandable microspheres. Different properties were tested using the S2-tensile bar, e.g. density, tensile strength, specific tensile strength, elongation at break, stress at 100 % strain and the hardness. It was found that the two types of microspheres used have similar effects on density, specific tensile strength and elongation at break, but differ in ...
Konferenzveröffentlichung
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
The Influence of different die geometries on the Extrusion Process of High-Consistency Silicone Rubber
(Society of Plastics Engineers, 2019)
Silicone Rubber and especially High-Consistency Silicone Rubber (=HCR), are typically processed in the extrusion process. Due to the high requirements in terms of the ma-terial properties and the geometric dimensions, a funda-mental knowledge of the whole process including experi-ences in tool design are essential.
In this study, HCR with different Shore-hardnesses are extruded on a vertical silicone extrusion line with various breaker plates with different length to diameter ratios (=L/D-ratio) in order to analyze ...
Konferenzveröffentlichung
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Pull and Foam - Injection moulding method: Foamed ribs for stiffening plane components
(Society of Plastics Engineers, 2012)
The pull and foam method is a foam injection moulding method which is currently being developed at the Institut für Werkstofftechnik (IfW) (Institute of Materials Engineering) at the University of Kassel. The processing principle represents an alternative to the existing foam injection moulding special procedures and introduces the possibility to partially foam a component. In so doing, thin-walled, hardly foamed components with foamed ribs can be made in one processing step, thus also components with graded ...
Konferenzveröffentlichung
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Formation of morphology as a function of process control by foam injection molding of a functionally graded component
(Society of Plastics Engineers, 2014)
A special mold technology enables the production of foam injection molded components with locally differing foaming ratios. Thus, components with functionally graded foam structures can be produced in one processing step. The method (pull and foam method) is based on the idea of creating components with thin-walled areas with a high surface quality and partially foamed, thick-walled areas (e.g. with the function of integrated structural elements) in a controlled foaming process. This paper describes the characteristics ...
Konferenzveröffentlichung
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Changeable Thermal Management for LED-Lighting
(Society of Plastics Engineers, 2015)
Thermal management of LED lights can be arranged by deliberately influencing lighting components conduction capabilities and reducing the thermal contact resistance for various joining processes. The research details the possibilities thereof and shows the thermal contact resistance of plastic and
Konferenzveröffentlichung
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Development of a Radian Friction Welding Machine Using the Circular Process with Limited Rotational Motion
(Society of Plastics Engineers, 2013)
The processing-technological limitations of components which can not be continuously rotated, either due to their length or marginal protrusions, make the realization of several potential applications using rotation welding unthinkable. The difficulties that arise while generating a high quality weld and are caused by large component tolerances and component warping are known. In order to extend the potential of friction welding, it is necessary to develop a new welding technology. In cooperation with Fischer ...
Buch
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Rotatives Vibrationsschweißen
(kassel university press, 2017)
Schweißversuche mit den von dem Schweißmaschinenhersteller Fischer Kunststoff-Schweißtechnik GmbH entwickelten Prototypenmaschinen für das neuartige Rotative Vibrationsschweißen zeigen eine vergleichbare erforderliche Prozessführung und die bereits bekannten Ausprägungen der vier Schweißprozessphasen anderer Vibrationsschweißverfahren. Unter Verwendung unterschiedlicher Werkstoffe und Probekörpergeometrien zeigt sich, dass sich die Fügenahteigenschaften von mit dem Rotativen Vibrationsschweißverfahren gefügten ...
Buch
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Struktur-Eigenschafts-Beziehung von Mischungen aus thermoplastischem PMMA mit vernetzten PMMA-Kolloiden
(kassel university press, 2016)
Ziel dieser Arbeit war es, ein Compound aus Partikeln aus untereinander vernetzten Polymerketten, sogenannten Kolloiden, und thermoplastischem Matrixmaterial basierend auf dem gleichen Monomer (MMA) aus ingenieurwissenschaftlicher Sicht zu charakterisieren und die Struktur-Eigenschafts-Beziehungen zu klären. Durchgeführt wurden die Untersuchungen an Compounds mit Kolloiden mit verschiedenen Größen, Vernetzungsgraden und Anteilen, die zunächst in Benzol mit dem Matrixmaterial, Plexiglas® 6N, vermischt wurden.
Neben ...