Suche
Anzeige der Dokumente 1921-1930 von 1944
Aufsatz
UV Surface Treatment of Polycarbonate for Adhesion Improvement to Liquid Silicone Rubber (LSR)
(2018)
The adhesion of self-adhesive liquid silicone rubbers to thermoplasts is only possible for a few selected material combinations without a surface pretreatment. A UV pretreatment is effective for polycarbonate and short irradiation periods are sufficient. To clarify the required irradiation conditions that result in an improvement of adhesion, the varying irradiation conditions were assessed. FTIR-ATR spectroscopy was used for surface analysis to characterize the change in the polymer surface.
Dissertation
Wie können sich die Freiburger Quartiere generationengerecht weiterentwickeln?
(2016)
Wie können sich Freiburger Quartiere weiterentwickeln und dabei die Wohn- und Lebens-bedürfnisse aller Generationen berücksichtigen? Die vorliegende stadtplanerische Studie befasst sich mit den Chancen und Herausforderungen einer Universitätsstadt, die durch ihr Angebot an Ausbildungsmöglichkeiten in Verbindung mit einer hohen Lebens- und Freizeit-qualität viele junge Menschen anzieht. Gleichzeitig und kaum beachtet, gibt es auch in die-ser Stadt eine Alterung, die es in den vorherigen Generationen in diesem Umfang ...
Aufsatz
Spatio-temporal resolution studies on a highly compact ultrafast electron diffractometer
(2015)
Time-resolved diffraction with femtosecond electron pulses has become a promising technique to directly provide insights into photo induced primary dynamics at the atomic level in molecules and solids. Ultrashort pulse duration as well as extensive spatial coherence are desired, however, space charge effects complicate the bunching of multiple electrons in a single pulse.Weexperimentally investigate the interplay between spatial and temporal aspects of resolution limits in ultrafast electron diffraction (UED) on our ...
Verschiedenartige Texte
Greece: Austerity's unexpected allies
(2018-04)
Contrary to pre-electoral proclamations and the recent optimism of the government and its European allies, the situation since 2015 has only gotten worse. Pensions have been cut twice more (with additional cuts promised in future). More than 1 million Greeks have already suffered some form of appropriation due to debt, with another 1.7 million waiting in line - a number that represents only 70% of those indebted to the tax office. One in three face material and social deprivation (Eurostat, 2016), placing Greece third ...
Aufsatz
Characterization of Anisotropic Properties of Hot Compacted Self-Reinforced Composites (SRCs) via Thermal Diffusivity Measurement
(2019-11-01)
The mechanical properties of self-reinforced composites (SRCs) produced in a hot compaction process significantly depend on the process parameters. Only a little deviation of the process temperature or pressure causes the component to act differently under mechanical load. This is a chance and a challenge at the same time, since this process is difficult to handle but by properly controlling the process parameters, the mechanical properties can be adjusted, even locally for one component. In this research SRC are ...
Aufsatz
A Closer Look at the Bonding Capacity of Thick Metal-Plastic Hybrids
(2019-03-01)
Metal-plastic hybrids have a lot of advantages compared to purely metal or purely plastic parts. A good design for metal-plastic hybrids can help to save weight, for example in automotive applications. Therefore, it is important to understand the joining mechanisms between both materials. Aluminum AlSi9Cu3(Fe) and polyamide 6.6 with 35 % glass fibers were used as joining partners. The materials were joined by enclosing the metal part at least partially with plastic right inside the injection molding tool. Afterwards, ...
Aufsatz
UV Pre-Treatment for Polycarbonate for Bonding LSR in a Multi-Component Injection Molding Process
(2019-03-01)
In this study, the influence of UVC radiation and the influence of ozone on the surface energy of specimens made of polycarbonate were investigated. In an additional step, the peeling resistance of silicone flaps, which were overmolded, onto pre-treated PC plates of multicomponent specimens were analyzed. For this purpose, the samples were exposed to UVC radiation for different lengths of time, ranging from 5 s to 3 600 s. To further evaluate the influence of the ozone created by the UVC in the presence of oxygen, ...
Zeitschrift
Jahresbericht 2011 / KDEE
(Universität Kassel, Kompetenzzentrum für Dezentrale Elektrische Energieversorgungstechnik (KDEE), 2012-02)
Zeitschrift
Jahresbericht 2010 / KDEE
(Universität Kassel, Kompetenzzentrum für Dezentrale Elektrische Energieversorgungstechnik (KDEE), 2011-03)
Aufsatz
Characterization of wood-based multi-material systems under dynamic impact stress
(2018)
Due to its naturally grown properties, wood has played a rather subordinate role as a material for technical applications up to now. In this paper, multi-material systems based on veneers of beech (Fagus sylvatica) with different reinforcing variants were investigated. In addition to the influence of different adhesive systems (urea formaldehyde and polyurethane), the effect of reinforcing by aramid fiber fabric and stainless steel foil in different climates was examined. At the center of the investigations were ...