Suche
Anzeige der Dokumente 21-30 von 101
Masterarbeit
Simulative Research on a Modified VSM Control Scheme for Respecting DC-Side Active-Power Limitations
(2022)
This thesis presents and examines a novel approach to modify the active-power behaviour of a generic virtual synchronous machine (VSM) in order to respect DC-side active-power limitations of converter-coupled generation and loads, thereby enabling them to participate in instantaneous reserve without hardware reinforcements.
A modification to the VSM control is suggested, which consists of a ∆P feedback loop and a dynamic adaptation of the virtual impedance Xvirt. These mechanisms enable the VSM to have a RoCoF-dependent ...
Dissertation
Entwicklung eines Nanospektrometer-Demonstrators für den sichtbaren Spektralbereich
(2022)
Ein miniaturisiertes optisches Spektrometer auf Basis eines Fabry-Pérot-Filter-Arrays wird für den sichtbaren Spektralbereich als Demonstrator realisiert. Hierfür wird ein FP-Filter-Array mit einem optischen Bandpass-Filter in eine Graustufen-CCD-Kamera integriert und ein Algorithmus zur Signalverarbeitung implementiert. Die Kalibrierung des Spektrometers wird experimentell mit Hilfe einer durchstimmbaren Lichtquelle durchgeführt, die in dieser Arbeit konstruiert und verifiziert wird. Die Bezeichnung des Spektrometers ...
Dissertation
District heating systems for new residential areas: On the impact of system temperatures
(2022-11)
Erneuerbare Niedertemperatur-Wärmenetzsysteme können einen wichtigen Beitrag zur Dekarbonisierung der Wärmebereitstellung dicht bebauter Wohngebiete leisten. Es ist bisher unklar, welche Auswirkungen die Wahl der Systemtemperatur, hier die mittlere Wärmenetzsystemvorlauftemperatur, auf die Erschließung neuer Wohngebiete mit Niedertemperatur-Wärmenetzsystemen hat. Ziel ist es, den Einfluss der Systemtemperatur auf die ökologische und ökonomische Effizienz von erneuerbaren Wärmenetzsystemen für neue Wohngebiete mit ...
Dissertation
Optimierter Einsatz von Ferritmagneten in permanentmagneterregten Synchronmotoren für Elektrofahrzeuge
(2022-11)
In der vorliegenden Dissertation wird eine konzeptionelle Maschine entwickelt. Dabei werden drei Disziplinen, die elektromagnetische, die mechanische als auch ein Optimierungsverfahren, zur Entwicklung des Maschinendesigns miteinander verknüpft. In der ersten Disziplin, der elektromagnetischen, werden die Performance als auch die elektrischen Eigenschaften mit den Anforderungen verglichen. Dabei werden zugleich problematische Eigenschaften wie das Entmagnetisieren der Magneten durch geeignete Optimierungen verbessert. ...
Dissertation
Kritikalitätsbewertung und Bordnetzsteuerung für ein prädiktives Leistungsmanagement
(2022)
Das elektrische Bordnetz in heutigen Fahrzeugen versorgt die elektrischen Verbraucher mit Energie und setzt sich aus Generator, DC-DC-Wandlern, Batterien, Verbrauchern sowie Leitungen zusammen. Aufgrund der zunehmenden Elektrifizierung von Verbrauchern in Folge der steigenden Umweltschutzanforderungen sowie der Weiterentwicklung des automatisierten Fahrens steigt der Leistungsbedarf im Bordnetz stark an. Die heutigen Bordnetze können diese erhöhten Leistungsanforderungen nur durch leistungsstärkere Generatoren, ...
Preprint
Solar fractions of SHIP plants considering the availability of roof area based on OpenStreetMap data
(2022-02-04)
Solar heat for industrial processes (SHIP) can be a key technology to decarbonize the industrial heat demand world-wide. Several national studies use either a bottom-up or a top-down-approach to assess the potential of solar process heat using estimated fixed solar fractions. Due to limited area available for the installation of solar collectors and the reasonality of the load profile, this solar fraction cannot be achieved in all cases. To address this limitation, another estimated factor is used in those studies. ...
Dissertation
Three-dimensional hydrodynamic and ecosystem modeling of warm-monomictic reservoirs (Maroon and Abolabbas, Iran) under the impact of 21st century climate change
(2021-11)
Lakes and reservoirs, as the endpoint of their upstream catchment, collect their water as the resultant of the hydrological and ecosystem processes and, thus, act as a gauge of their catchment’s management. Physical processes, e.g. stratification and mixing and propagation of density currents, are the main drivers of the biochemical factors in lakes and reservoirs and are prone to be altered and affected by climate change. Hydrodynamic models are the tools to simulate the behavior of the water body under various ...
Dissertation
Behaviour Study of Grouted Connection for Offshore Wind Turbine Structures with Brittle Cement Based Grouts
(2020)
Researches show that the energy demand in the world is significantly increasing and climate change becomes a problematic issue, therefore, the interest in renewable energy is growing extremely fast. Offshore wind energy is one of the most effective renewable sources in Europe and other places in the world. One of the most important parts in the offshore foundation is the grouted connection as it is the first element to be designed in the design of the foundation structure of an offshore wind turbine because the ...
Konferenzveröffentlichung
Design of flexible pavements with cold recycled asphalt bases: Comparison of five national approaches
(2020)
The Application of reclaimed asphalt is becoming increasingly important in the European Road Network. Beside the conventional recycling options (i. e. hot asphalt mixtures), cold recycling has been successfully applied in numerous road structures within the secondary and the main road network. However, the standard design procedures for common pavement materials as well as the approaches for cold recycling differ from one country to another. The comparison of five national pavement design procedures shows, that ...
Masterarbeit
Analyse der Prognosestreuung bei der Bewertung der menschlichen Zuverlässigkeit mit der MTQM-Methode in der Bearbeitung von Aluminiumleichtbauteilen
(2020)
Im Forschungsvorhaben „Systematische Prognose der menschlichen Zuverlässigkeit bei manuellen Montagetätigkeiten“ wurde die Montageplanungsmethode MTQM (Methods Time and Quality Management) entwickelt. Diese führt Aspekte der Zeitwirtschaft mit Aspekten der Qualitätsplanung zusammen und ermöglicht dem Montageplaner eine Prognose der Human Error Probability (HEP) von manuellen Montagetätigkeiten. Um Durchführungsaufwand, Usability und Vergleichspräzision der Methode zu verbessern, wurde die Methode in ein VBAbasiertes ...