Suche
Anzeige der Dokumente 181-190 von 347
Aufsatz
Effects of Aging under Stress on Mechanical Properties and Microstructure of EN AW 7075 Alloy
(2021-07-20)
In the present study, microstructural and mechanical properties of EN AW 7075 following stress-aging were assessed. For this purpose, properties of stress-aged samples were compared with values obtained for conventionally aged counterparts. It is revealed that the strength and hardness of EN AW 7075 can be increased by the presence of external stresses during aging. Precipitation kinetics were found to be accelerated. The effects of conventional and stress-aging on the microstructure were analyzed using synergetic ...
Aufsatz
Effect of Friction Stir Processing on Microstructural, Mechanical, and Corrosion Properties of Al-Si12 Additive Manufactured Components
(2020-01-03)
Additive manufacturing (AM) is an advanced manufacturing process that provides the opportunity to build geometrically complex and highly individualized lightweight structures. Despite its many advantages, additively manufactured components suffer from poor surface quality. To
locally improve the surface quality and homogenize the microstructure, friction stir processing (FSP) technique was applied on Al-Si12 components produced by selective laser melting (SLM) using two different working media. The effect of FSP on ...
Aufsatz
Influence of complex geometries on the properties of laser-hardened surfaces
(2020-04-25)
Laser surface hardening provides for many advantages in terms of flexible production due to very localized and controlled energy input into the material. Laser processing offers the possibility to treat surfaces in order to locally strengthen the areas that are prone to fatigue cracking. It is well known that laser energy absorption depends on many parameters, e.g., the surface structure and the surface orientation. The incident angle of the laser beam plays a key role in this regard. When complex geometries like ...
Aufsatz
Determinants of sustainable agricultural intensification adoption and impacts on household productivity and consumption in Rwanda
(2022-01-31)
Sustainable agricultural intensification (SAI) involves those farming systems that produce in ways that improve or maintain productivity with minimal e ects on the environment so that critical farm resources can endure. The objective of this paper is to investigate the determinants and impacts of the adoption of three interdependent sustainable agricultural intensification practices (crop residue retention, minimum tillage, and maize-legume diversification) and their combinations on household productivity and consumption ...
Aufsatz
Consequences of Deep Rolling at Elevated Temperature on Near-Surface and Fatigue Properties of High-Manganese TWIP Steel X40MnCrAl19-2
(2021-11-05)
Due to pronounced work-hardening induced by the complex interplay of deformation mechanisms such as dislocation slip, twinning and/or martensitic phase transformation, high-manganese steels represent a class of materials well-suited for mechanical surface treatment. In the present study, the fatigue behavior of a high-mangsanese steel showing twinning-induced plasticity (TWIP) effect at room temperature (RT) was investigated after deep rolling at 550 °C. Results are compared to a former study discussing the behavior ...
Aufsatz
Contribution of dairy goat farming to household dietary diversity among smallholder farmers in the Central Highlands of Kenya
(2023-02-21)
In Kenya, dairy goat farming has highly been practiced for food provision and as an income-generating enterprise. However, there is scanty information on the contribution of dairy goat farming to the quality of diets consumed at household level especially among rural smallholder farmers. This study therefore analysed the contribution of dairy goat farming to household dietary diversity of the smallholder farmers. Data was collected at the end of the wet season (April-May) from a sample of 385 households in Kirinyaga ...
Aufsatz
Small-scale farmers’ coping strategies to extreme weather events in Upper Guinea
(2023-03-06)
Extreme weather events pose a serious threat to subsistence farming and food security in Upper Guinea, where most farmers rely heavily on rain-fed agriculture. Following crop failures, farmers use what is available to them to try to maintain household food security. This paper investigated the coping strategies chosen by farmers in Upper Guinea and the motivating factors behind them. A multistage sampling method was used to select a purposive random sample of 1,500 farm households within nine selected livelihood zones ...
Aufsatz
Excellent superelasticity in a Co-Ni-Ga high-temperature shape memory alloy processed by directed energy deposition
(2020-04-30)
A Co-Ni-Ga high-temperature shape memory alloy has been additively manufactured by directed energy deposition. Due to the highly anisotropic microstructure, i.e. columnar grains featuring a strong near-⟨001⟩ texture in build direction, the as-built material is characterized by a very low degree of constraints and, thus, shows excellent superelasticity without conducting a post-process heat treatment. As characterized by in situ deformation testing and post-mortem microstructural analysis, additive manufacturing ...
Aufsatz
Novel Class of Rhenium Borides Based on Hexagonal Boron Networks Interconnected by Short B₂ Dumbbells
(2022-09-06)
Transition metal borides are known due to their attractive mechanical, electronic, refractive, and other properties. A new class of rhenium borides was identified by synchrotron single-crystal X-ray diffraction experiments in laser-heated diamond anvil cells between 26 and 75 GPa. Recoverable to ambient conditions, compounds rhenium triboride (ReB₃) and rhenium tetraboride (ReB₄) consist of close-packed single layers of rhenium atoms alternating with boron networks built from puckered hexagonal layers, which link ...
Aufsatz
A new method for microscale cyclic crack growth characterization from notched microcantilevers and application to single crystalline tungsten and a metallic glass
(2022-06-22)
The lifetime of most metals is limited by cyclic loads, ending in fatigue failure. The progressive growth of cracks ends up in catastrophic failure. An advanced method is presented for the determination of cyclic crack growth on the microscale using a nanoindenter, which allows the characterization of > 10,000 loading cycles. It uses focused ion beam fabricated notched microcantilevers. The method has been validated by cyclic bending metallic glass and tungsten microcantilevers. The experiments reveal a stable crack ...