Suche
Anzeige der Dokumente 21-30 von 40
Konferenzveröffentlichung
Interleaved Buck Converter with Coupled Inductors as Auxiliary Bias-Current Source for Controllable Magnetic Devices
(VDE Verlag, 2020-08-26)
This paper presents an Interleaved Buck Converter with Coupled Inductors as a DC-Bias Current Source for Controllable Magnetic Devices, the modular interleaved Buck system supplies a low-ripple current for the auxiliary DC-bias winding of a controllable inductor with different biasing winding disposition in relationship with the main operating flux of the inductor. A 4-phase interleaved Buck converter system was built and inductance measurements where made for different operating current values of the DC-bias and the ...
Konferenzveröffentlichung
Methoden zur Beurteilung der statischen Brauchbarkeit von Tragwerken
(Institut für Baustatik und Baudynamik, Universität Stuttgart, 2020)
Fehler in der Tragwerksplanung können zu kinematischen (beweglichen) Tragwerken führen, die aus statischer Sicht unbrauchbar sind. Mit dem Ziel, den Statiker beim Auffinden und Beheben derartiger Fehler zu unterstützen, müssen spezielle Methoden entwickelt werden. Dieser Beitrag enthält einen Überblick über klassische und moderne Methoden. Dabei erfolgt eine Klassifizierung in indirekte, direkte, Ursachen-spezifische und akademische Methoden.
Konferenzveröffentlichung
Unsymmetrische Beiträge zur Momentanreserve durch Erzeugung, Verbrauch und Speicher
(Conexio-PSE GmbH, 2022)
Im Zuge der Dekarbonisierung müssen Verbundsysteme auf wiederkehrende Situationen vorbereitet werden, während derer sie vor allem aus Wechselrichtern gespeist werden. Der stabilisierende Einfluss der durch Synchrongeneratoren direkt an das Netz gekoppelten Schwungmassen auf jede Frequenzveränderung ist heute unverzichtbar. Die inhärente Sofortreaktion von Synchronmaschinen auf Spannungswinkeländerungen und Frequenzbewegungen heißt Momentanreserve. Wenn sich Verbrauch oder Erzeugung dynamisch ändern, und besonders ...
Konferenzveröffentlichung
Asymmetric Contributions to Instantaneous Reserve by Generation, Loads, and Storage
(2022)
In the course of decarbonization, interconnected systems will have to be prepared for recurring situations during which they are fed by mostly inverter-based generation. Today, the stabilizing influence of the rotating masses directly coupled to the grid via synchronous generators on every frequency change is essential. The inherent immediate reaction of synchronous generators on voltage-angle changes and frequency variations is called instantaneous reserve. During dynamic situations such as load or generation changes ...
Konferenzveröffentlichung
Effects of the Cellular Morphology on Fatigue Deformation Mechanisms of Physically Foamed Polycarbonate
(2023)
In this study, the tension–tension fatigue behavior of foam injection molded thermoplastic microcellular Polycarbonate (PC) is characterized. The variation in morphology is obtained by modifying the mold temperature, injection volume, injection flow rate, and blowing agent content (physical and chemical) in the polymer melt. The relationship between the wide range of morphological qualities and relevant fatigue properties is made explicit via a statistical correlation coefficient analyses. The analysis is made between ...
Konferenzveröffentlichung
Microstructural and Mechanical Properties of AISI 4140 Steel Processed by Electron Beam Powder Bed Fusion Analyzed Using Miniature Samples
(ASTM International, 2022-02-26)
The present study reports on the identification of an adequate process window for electron beam powder bed fusion (E-PBF) of AISI 4140 steel. For characterization, only miniature samples were used. It is clearly revealed that, for comparison and evaluation of different conditions, the use of such small samples is absolutely sufficient, even under fatigue loading. The initial E-PBF as-built condition is compared with conventionally heat-treated conditions (i.e., normalized as well as quenched and tempered). Based on ...
Konferenzveröffentlichung
Unionsrechtliche Maßnahmen zugunsten des beschleunigten Ausbaus von erneuerbaren Energien
(2023)
Bislang beschränken sich die Vorgaben der Richtlinie über erneuerbare Energien darauf, bestimmte Anteile erneuerbarer Energien am Energiemix vorzuschreiben. So sah Art. 3 im Jahr 2018 vor, den Anteil am Gesamtenergieverbrauch bis 2030 auf 32 % zu steigern. Art. 16 verlangt bislang vor allem die Einrichtung von Anlaufstellen, Regelungstransparenz und eine Verfahrensdauer von zwei, ausnahmsweise drei Jahren. Inhaltliche Vorgaben für Genehmigungsverfahren fehlen dagegen bislang noch.
In jüngster Zeit unternimmt die ...