Suche
Anzeige der Dokumente 1-10 von 26
Dissertation
Bewertung von Eigenspannungen nach dem Laserstrahlhärten von komplex geformten Komponenten und additiv gefertigten Bauteilen
(2021)
Die Laserstrahlbearbeitung hat sich im Laufe der letzten Jahre zu einem wichtigen Forschungsschwerpunkt in industrieller und akademischer Hinsicht entwickelt. Neben der Erschließung neuer Anwendungsgebiete durch den Vorteil einer hohen Bearbeitungsflexibilität überzeugt die laserbasierte Materialbearbeitung vor allem durch einen lokal beeinflussbaren Energieeintrag. Jedoch sind derzeit mit zunehmender geometrischer Komplexität und Bauteilgröße nur begrenzte Tiefenwirkungen der gewünschten Druckeigenspannungen ...
Dissertation
Safety Approach of Detecting Abnormal Events (Spinning and Sliding) in Vehicular Systems
(2021)
The primary theme in the vehicles industry is the increase in automating and integrating more robust intelligent electronic systems to enhance the safe functioning, flexibility, and to extend the virtual productive age of the vehicular systems. Further, significant efforts focus on developing monitoring systems for the abnormal driving conditions such as wheel spinning and sliding that can increase the hazardous in the operating environment and speed up the wearing off process. Thus, these events play a primary role ...
Dissertation
Long-term voltage stability of electric power systems hosting inverter-interfaced energy sources
(2021)
The study of power system dynamics refers to the motion of electro-mechanical and electro-magnetic quantities such as voltages, currents, rotational speeds, angles and powers under the action of forces caused by system disturbances. For decades, such dynamics have been extensively dominated by large Synchronous Generators (SGs). Not a surprising statement, considering that the power systems that we know today were built based on the SG concept since the closing decades of the 19th century. It all began in 1891, when ...
Dissertation
Integrierte hydrologische Modellierung von Oberflächen- und Grundwasser in dem mesoskaligen Einzugsgebiet des Rautenbach, Nordhessen
(2021-07)
In den vergangenen Jahren kam es in Europa vermehrt zu sommerlichen Dürreperioden mit erheblichen Beeinträchtigungen der Ökosysteme sowie für Land- und Forstwirtschaft. Die dadurch zunehmenden Herausforderungen an das Wasserressourcenmanagement fordern ein erweitertes Systemverständnis, welches durch realitätsnahe hydrologische Modellierung gewonnen werden kann.
Integrierte hydrologische Modelle ermöglichen die räumlich und zeitlich differenzierte Abbildung ober- und unterirdischer Abflüsse und derer Wechselwirkungen. ...
Preprint
Annual industrial and commercial heat load profiles: modeling based on k-Means clustering and regression analysis
(2021-03-19)
An accurate method to predict annual heat load profiles is fundamental to many studies, e.g., preliminary design or potential studies on renewable heating systems. This study presents a method to predict annual heat load profiles with a daily resolution for industry and commerce, based on an analysis of 800 natural gas load profiles (≥ 1.5 GWh/a). To derive heat load profiles, these natural gas load profiles are normalized and those with a potentially non-linear relationship between heat demand and natural gas ...
Dissertation
Untersuchung von Farbspektren und deren Zusammenhang mit anderen Produkteigenschaften bei unterschiedlichen Trocknungsprozessen von Lebensmitteln
(2021)
Zur Erfassung von Veränderungen der Produkteigenschaften während der Trocknung von Lebensmitteln werden zerstörungsfreie Qualitätsmesstechniken gefordert, mit denen Veränderungen im Inneren des Produkts bestimmt werden können. Gerade im industriellen Einsatz sind schnelle, präzise, und gleichzeitig robuste Verfahren besonders wichtig, um qualitativ hochwertige Produkte zu erhalten.
In dieser Arbeit wurde zur optischen Qualitätsmessung ein neuartiges multispektrales Kamerasystem eingesetzt, um von Veränderungen der ...
Dissertation
Three-dimensional hydrodynamic and ecosystem modeling of warm-monomictic reservoirs (Maroon and Abolabbas, Iran) under the impact of 21st century climate change
(2021-11)
Lakes and reservoirs, as the endpoint of their upstream catchment, collect their water as the resultant of the hydrological and ecosystem processes and, thus, act as a gauge of their catchment’s management. Physical processes, e.g. stratification and mixing and propagation of density currents, are the main drivers of the biochemical factors in lakes and reservoirs and are prone to be altered and affected by climate change. Hydrodynamic models are the tools to simulate the behavior of the water body under various ...
Working paper
Reference applications for renewable heat
(2021-01-25)
There is a high degree of freedom and flexibility in the way to integrate renewable process heat in industrial processes. Nearly in every industrial or commercial application various heat sinks can be found, which are suitable to be supplied by renewable heat, e.g. from solar thermal, heat pumps, biomass or others. But in contrast to conventional fossil fuel powered heating systems, most renewable heating technologies are more sensitive to the requirements defined by the specific demand of the industrial company. ...
Aufsatz
On the reliability of residual stress measurements in unidirectional carbon fibre reinforced epoxy composites
(2021-03-03)
The present work introduces a novel methodology to analyse non-uniform residual stresses in composite materials. For robust determination of stresses in complex structures made of different layers, it is first necessary to prove that residual stress analysis in a single layer structure can reliably be accomplished. In present work a unidirectional carbon fibre reinforced epoxy is investigated. For residual stress determination, the integral incremental hole drilling method is used. It is revealed that the standard ...
Aufsatz
Mechanics of colloidal supraparticles under compression
(2021-10-13)
Colloidal supraparticles are finite, spherical assemblies of many primary particles. To take advantage of their emergent functionalities, such supraparticles must retain their structural integrity. Here, we investigate their size-dependent mechanical properties via nanoindentation. We find that the deformation resistance inversely scales with the primary particle diameter, while the work of deformation is dependent on the supraparticle diameter. We adopt the Griffith theory to such particulate systems to provide a ...