Suche
Anzeige der Dokumente 11-20 von 132
Aufsatz
Effect of Friction Stir Processing on Microstructural, Mechanical, and Corrosion Properties of Al-Si12 Additive Manufactured Components
(2020-01-03)
Additive manufacturing (AM) is an advanced manufacturing process that provides the opportunity to build geometrically complex and highly individualized lightweight structures. Despite its many advantages, additively manufactured components suffer from poor surface quality. To
locally improve the surface quality and homogenize the microstructure, friction stir processing (FSP) technique was applied on Al-Si12 components produced by selective laser melting (SLM) using two different working media. The effect of FSP on ...
Aufsatz
Influence of complex geometries on the properties of laser-hardened surfaces
(2020-04-25)
Laser surface hardening provides for many advantages in terms of flexible production due to very localized and controlled energy input into the material. Laser processing offers the possibility to treat surfaces in order to locally strengthen the areas that are prone to fatigue cracking. It is well known that laser energy absorption depends on many parameters, e.g., the surface structure and the surface orientation. The incident angle of the laser beam plays a key role in this regard. When complex geometries like ...
Dissertation
Modellierung von offenen Absorptionsanlagen zur Raum- und Prozessluftentfeuchtung
(2023)
Luftentfeuchtung erfolgt in herkömmlichen Trocknungs- und Klimatisierungsanlagen durch eine Kühlung der feuchten Luft unter ihren Taupunkt (Kondensationsentfeuchter) und einer anschließenden Erwärmung bis zu der gewünschten Temperatur. Das Prinzip dieser Betriebsweise birgt einen unnötigen Stromverbrauch. In der vorliegenden Dissertation wird daher ein alternatives Luftentfeuchtungsverfahren beschrieben, bei dem die Luftentfeuchtung durch einen offenen Absorptionsprozess realisiert wird. In dem offenen Absorptionsprozess ...
Aufsatz
Consequences of Deep Rolling at Elevated Temperature on Near-Surface and Fatigue Properties of High-Manganese TWIP Steel X40MnCrAl19-2
(2021-11-05)
Due to pronounced work-hardening induced by the complex interplay of deformation mechanisms such as dislocation slip, twinning and/or martensitic phase transformation, high-manganese steels represent a class of materials well-suited for mechanical surface treatment. In the present study, the fatigue behavior of a high-mangsanese steel showing twinning-induced plasticity (TWIP) effect at room temperature (RT) was investigated after deep rolling at 550 °C. Results are compared to a former study discussing the behavior ...
Masterarbeit
Vergleich & Anpassung zweier Strategien zur Anomalieerkennung in Lastgängen basierend auf Verfahren aus den Bereichen Machine-Learning und Statistik
(2020-11)
In dieser Masterarbeit werden zwei Strategien zur Anomalieerkennung in Lastgängen ausgewertet. Dazu nutzt Strategie 1 das künstliche neuronale Netzwerk LSTM (Long Short-Term Memory) mit Datenzeitraum von einem Monat (1M) bzw. drei Monaten (3M) trainiert und Strategie 2 das Glättungsverfahren PEWMA (Probalistic Exponential Weighted Moving Average) zur Schätzung des zu untersuchenden Lastgangmonats. Durch den Vergleich mit Originallastgangdaten werden Residuen bzw. summierte Residuen der Sequenzlängen zwei, vier, sechs ...
Aufsatz
Excellent superelasticity in a Co-Ni-Ga high-temperature shape memory alloy processed by directed energy deposition
(2020-04-30)
A Co-Ni-Ga high-temperature shape memory alloy has been additively manufactured by directed energy deposition. Due to the highly anisotropic microstructure, i.e. columnar grains featuring a strong near-⟨001⟩ texture in build direction, the as-built material is characterized by a very low degree of constraints and, thus, shows excellent superelasticity without conducting a post-process heat treatment. As characterized by in situ deformation testing and post-mortem microstructural analysis, additive manufacturing ...
Aufsatz
Novel Class of Rhenium Borides Based on Hexagonal Boron Networks Interconnected by Short B₂ Dumbbells
(2022-09-06)
Transition metal borides are known due to their attractive mechanical, electronic, refractive, and other properties. A new class of rhenium borides was identified by synchrotron single-crystal X-ray diffraction experiments in laser-heated diamond anvil cells between 26 and 75 GPa. Recoverable to ambient conditions, compounds rhenium triboride (ReB₃) and rhenium tetraboride (ReB₄) consist of close-packed single layers of rhenium atoms alternating with boron networks built from puckered hexagonal layers, which link ...
Aufsatz
A new method for microscale cyclic crack growth characterization from notched microcantilevers and application to single crystalline tungsten and a metallic glass
(2022-06-22)
The lifetime of most metals is limited by cyclic loads, ending in fatigue failure. The progressive growth of cracks ends up in catastrophic failure. An advanced method is presented for the determination of cyclic crack growth on the microscale using a nanoindenter, which allows the characterization of > 10,000 loading cycles. It uses focused ion beam fabricated notched microcantilevers. The method has been validated by cyclic bending metallic glass and tungsten microcantilevers. The experiments reveal a stable crack ...
Dissertation
Untersuchung von Gussporen in einer Aluminium-Gusslegierung mit der Computertomographie
(2022-04)
In dieser Arbeit wird das Schädigungsverhalten einer Aluminium-Gusslegierung anhand von zweidimensionalen und dreidimensionalen Verfahren untersucht. Dabei liegt das Hauptaugenmerk auf innenliegenden Gussdefekten wie Gas- und Schrumpfungsporen. Die Schädigungsentwicklung unter schwingender Belastung, sowie der Einfluss auf die Mikrostruktur und die mechanischen Eigenschaften sowie die Wechselwirkung verschiedener Gussdefekte werden dabei untersucht. Insbesondere wird der beim Versagensverhalten entscheidende Einfluss ...
Aufsatz
Effect of Cell Morphology on Flexural Behavior of Injection-Molded Microcellular Polycarbonate
(2022-05-19)
The quantitative study of the structure and properties relationship in cellular materials is mostly limited to cell diameter, cell density, skin layer thickness, and cell size distribution. In addition, the investigation of the morphology is generally carried out in two dimensions. Therefore, the
interrelation between morphological properties and mechanical characteristics of the foam structure has remained in an uncertain state. In this study, during the physical foaming process, a foam morphology is locally created ...