Suche
Anzeige der Dokumente 51-60 von 155
Aufsatz
Dimensioning of Heat Pump Systems Based on Pinch Analysis and Energy Monitoring Data
(2018)
In this paper, typical process chains of metal processing/gear manufacturing are examined according to the pinch method with regard to their potential for heat recovery and their suitability for heat pump applications. The focus is on machine tools and parts washing machines as fluctuating heat sources and sinks. Heat sources at a low temperature level, such as the cooling of machine tools, are becoming increasingly important in contrast to conventional fossil waste heat sources due to the electrification of energy ...
Aufsatz
Evaluation of a Stratified Tank based Heat Recovery Loop via Dynamic Simulation
(2018)
Prerequisite for hot water recovery in the dairy and beverage industry is the use of heat storage, such as stratified tanks. Total Site Heat Integration enables the targeting of heat recovery potential, the concrete identification of suitable sinks and source profiles and the dimensioning of intermediate circuits and storages. For a cost and energy efficient storage, the aim to maintain stratification by suitable thermocline control management. Dynamic simulation enables a reliable estimation of energy savings and ...
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Relaxation properties of polyoxymethylene and ethylene–octene copolymer blend in solid and melt states
(2012-08-30)
Rheological properties of polyoxymethylene (POM) and ethylene–octene copolymer (EOC) in solid and melt states were investigated. Blends were prepared with a twin screw extruder at broad component wt-to-wt ratios (10, 30, 50, 70, 90 wt% of EOC). The morphology as well as calorimetric, rheological, and elastic properties of the blends were studied. The investigation showed that POM/EOC blends were heterogeneous in nature and had a broad phase transition region between 30 and 70 wt% of POM. Because during processing ...
Aufsatz
Predictive Simulation-based Optimisation of Cooling System Including a Sprinkler Tank
(2018)
Prerequisite for an efficient cooling energy system is the knowledge and the optimal combination of different operating conditions of individual compression and free cooling chillers. The performance of cooling systems depends on its part load performance and its condensing temperature, which are often unknown. Recorded energy data remains unused and manufacturers' data significantly differs from the real performance. For this purpose, manufacturer and real data are combined and continuously adapted to form partial ...
Aufsatz
Mechanical properties of hybrid glass/kenaf fibre-reinforced epoxy composite with matrix modification using liquid epoxidised natural rubber
(2015-04-27)
The hybridisation of natural fibre with glass fibre provides a method to improve the mechanical properties instead of using the natural fibres alone. This research is focused on the hybridisation of glass/kenaf fibre with the addition of liquid epoxidised natural rubber to enhance the desired mechanical properties of the composite by reducing the synthetic fibre usage and encourage the natural fibre consumption. Liquid epoxidised natural rubber was added to the epoxy matrix in order to improve its mechanical properties ...
Dissertation
Proaktive Tätigkeitsunterstützung
(2018-12)
In der vorliegenden Dissertation wird eine Methode zur Identifikation von durchgeführten Tätigkeiten anhand der Pupillendynamik entwickelt. Dieses Methode bildet die Grundlage für eine kontextabhängige Unterstützung bei der Durchführung von Tätigkeiten durch ein Nutzerassistenzsystem. Hierzu werden aus der Literatur Merkmale zusammengetragen, die sich aus der Pupillendynamik ableiten lassen und sich zur Kontexterkennung eignen. Aufbauend auf diesen grundlegenden Merkmalen, werden differenziertere Merkmale entwickelt, ...
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
Parameter identification for constitutive models of innovative textile composite materials using digital image correlation
(2019-11-18)
This contribution focuses on an innovative composite material consisting of textile layers made from continuous wooden fibers embedded in a thermoplastic matrix. A finite element simulation of potential use‐cases is planned to support the development process and to study the suitability of the material in an architectural context. The simulation is based on a constitutive model assuming homogenous orthotropic elastic behavior and will be expanded to include multiscale modeling in future research. The material parameters ...
Aufsatz
![Open Access](/themes/Mirage2/images/Open_Access_logo_PLoS_transparent.svg)
System efficient integration of standby control and heat pump storage systems in manufacturing processes
(2019-05-24)
Prerequisite for system efficiency towards an industrial energy transition is the reducing of energy demand on the process level. In typical manufacturing systems with machine tools and washing machines, the proper design of intelligent standby control and heat pump storage system (HPS) represent high efficiency. The integration of HPS is complicated due to high non-continuity, especially when implementing a standby control system. Our approach aims at designing one single HPS for multiple heat sources and sinks. ...
Dissertation
Simulation-based optimization of solar thermal systems
(2018)
In this PhD thesis application of numerical methods to simulation-based optimization of solar thermal systems both in the planning process and in operation is investigated. The optimization process starting from definition of a target function and specification of optimization parameters, moving forward with application of an optimization algorithm and ending up by sensitivity analysis at the found optimum, is described in detail. A hybrid genetic CHC – binary search algorithm is proposed and applied. As a combination ...