Suche
Anzeige der Dokumente 81-90 von 119
Dissertation
Theoretical and experimental study of intracavity laser absorption spectroscopy
(2015-03-25)
In this thesis, a dual mode tunable gas sensor based on intracavity laser absorption spectroscopy (ICLAS) principle is investigated, both, numerically and experimentally. In order to minimize the cost and size of the gas sensor, relative intensity noise (RIN) is implemented as a detection parameter. Investigation is performed to determine the effect of injection current, operating temperature, mode spacing, and cavity length on RIN. It has been found that it is best to operate the gas sensor at smaller mode spacing ...
Dissertation
Development, Evaluation and Optimization of Fabrication Processes for Daylight Guiding Systems Based on Micromirror Arrays
(2017-01-11)
In this work, fabrication processes for daylight guiding systems based on micromirror arrays are developed, evaluated and optimized.Two different approaches are used: At first, nanoimprint lithography is used to fabricate large area micromirrors by means of Substrate Conformal Imprint Lithography (SCIL).Secondly,a new lithography technique is developed using a novel bi-layered photomask to fabricate large area micromirror arrays. The experimental results showing a reproducible stable process, high yield, and is ...
Dissertation
3D nanoimprint technology for NIR Fabry-Pérot filter arrays
(2016-06-28)
Im Rahmen dieser Arbeit wird die Herstellung von miniaturisierten NIR-Spektrometern auf Basis von Fabry-Pérot (FP) Filter Arrays behandelt. Bisher ist die kostengünstige Strukturierung von homogenen und vertikal erweiterten Kavitäten für NIR FP-Filter mittels Nanoimprint Technologie noch nicht verfügbar, weil die Qualität der Schichten des Prägematerials unzureichend ist und die geringe Mobilität der Prägematerialien nicht ausreicht, um die vertikal erweiterten Kavitäten zu füllen. Diese Arbeit konzentriert sich auf ...
Dissertation
Optical Sensor Array based Nanospectrometer: Fabrication of high resolution 3D NanoImprint master templates and bonding of Fabry-Pérot filter array onto photodetector array
(2017-05-11)
In the field of optical spectroscopy, spectrometers are high resolution optical sensors that have emerged as a platform for a wide range of application fields. Commercially available spectrometers are bulky and expensive. Hence, this limits its integration into modern mobile and wearable devices. To overcome this limitation, miniaturization of spectrometers is an interesting target for a wide range of emerging applications. The most attractive concept of fabricating miniaturized spectrometers is the Fabry-Pérot filter ...
Dissertation
Mixed Signal CMOS ASIC mit integrierten frei verschaltbaren Photodioden und Signalvorverarbeitung zur adaptierbaren Ortsfrequenzfilterung
(2016-12-15)
Die vorliegende Arbeit untersucht die Integrierbarkeit von Photodioden und zugehörigen Signalvorverarbeitungen mit dem preisgünstigen Standard-0,5-µm-Prozess bzw. 0,35-µm-CMOS-Prozess. Als Pilotanwendung wurde die Realisierung eines flexiblen Ortfrequenzfilters vorgesehen, der durch die Verschaltung und die Wichtung von integrierten Photodioden gebildet wird.
Mit einem integrierten optoelektronischen Bauteil (Opto-ASIC) sollte die Funktionaliät eines CORREVIT®-Sensors (der Firma Corrsys 3D Sensors) aus Prismengitter, ...
Dissertation
A Modeling Analysis of Changing Global Land Use as affected by Changing Demands for Wood Products
(2010-01-08)
The 21st century has brought new challenges for forest management at a time when globalization in world trade is increasing and global climate change is becoming increasingly apparent. In addition to various goods and services like food, feed, timber or biofuels being provided to humans, forest ecosystems are a large store of terrestrial carbon and account for a major part of the carbon exchange between the atmosphere and the land surface. Depending on the stage of the ecosystems and/or management regimes, forests ...
Dissertation
Implizite Positionierung unter Nutzung des Smartphone-Kompasses
(2019)
Der Ort, an dem ein Nutzer sich in einem Gebäude aufhält, spielt für technische Dienste wie Heimautomatisierung eine zentrale Rolle. In dieser Dissertation wird die Implizite Positionierung vorgestellt, ein neues Verfahren, das den Aufenthaltsort eines Nutzers mittels des Kompasses eines Smartphones erkennt, das der Nutzer bei sich trägt. Das Verfahren findet in den Kompassdaten Muster, die entstehen, wenn Nutzer durch Flure, Treppen, etc. oder um Ecken gehen. Da die Ausrichtungen dieser Orte die Nutzer in ihrer ...
Dissertation
Understanding Factors Influencing the Performance of a Wi-Fi Fingerprinting System
(2019)
Location information plays a vital role in today’s society. People usually carry their mobile devices everywhere they go to benefit from real-time location services; the location of the device is the location of users. The focus of positioning services is shifting from outdoors to indoors. Technological services which depend on indoor locations are increasing in popularity. Wi-Fi fingerprinting is a promising technique that can be used for indoor localization. In this regard, this dissertation targets at improving ...
Dissertation
MOCCAA - MObile Cloud Computing AdaptAble
(2019-08)
The primary objective of Mobile Cloud Computing (MCC) is the support of resource-constrained mobile devices by means of Cloud or nearby computing resources. In general, this is achieved by outsourcing or offloading computational intensive tasks of mobile applications. This allows, for instance, to virtually extend the processing power of mobile devices and, indirectly, to save battery life. In case remote resources are not available or the communication link is broken, still a local execution is possible.
The ...
Dissertation
Das NetworkParser-Framework
(2019-03-10)
Meine Dissertation, die im Fachbereich Elektrotechnik/Informatik in Kassel eingereicht wurde, hat das Ziel ein Tool zur Verfügung zu stellen, um den Entwickler bei der Entwicklung eines Programms in jedem Entwicklungsschritt zu unterstützen. Der komplette Ablauf von Story Driven Modeling wird dabei unterstützt. Das Tool soll so intuitiv bedienbar sein, dass Programmieranfänger damit arbeiten können und die Techniken erlernen können. Es ist gelungen ein kompaktes Tool für den kompletten SDM-Prozess zu schaffen, welches ...