Suche
Anzeige der Dokumente 21-30 von 33
Dissertation
THz Plasma Waves in Field-Effect-Transistors: A Monte Carlo Study
(2016-02-10)
Sensing with electromagnetic waves having frequencies in the Terahertz-range is a very attractive investigative method with applications in fundamental research and industrial settings. Up to now, a lot of sources and detectors are available. However, most of these systems are bulky and have to be used in controllable environments such as laboratories. In 1993 Dyakonov and Shur suggested that plasma waves developing in field-effect-transistors can be used to emit and detect THz-radiation. Later on, it was shown that ...
Dissertation
Optimization in the Technological Steps for the Fabrication of Large Area Micromirror Arrays
(2015-02-23)
Micromirror arrays are a very strong candidate for future energy saving applications. Within this work, the fabrication process for these micromirror arrays has been optimized and some steps for the large area fabrication of micromirror modules were performed. At first the surface roughness of the insulation layer of silicon dioxide (SiO2) was investigated. This SiO2 thin layer was deposited on three different type of substrates i.e. silicon, glass and Polyethylene Naphthalate (PEN) substrates. The deposition ...
Dissertation
Air-gap based vertical cavity micro-opto-electro-mechanical Fabry-Perot filters
(2006-03-02)
Mikrooptische Filter sind heutzutage in vielen Bereichen in der Telekommunikation unersetzlich. Wichtige Einsatzgebiete sind aber auch spektroskopische Systeme in der Medizin-, Prozess- und Umwelttechnik. Diese Arbeit befasst sich mit der Technologieentwicklung und Herstellung von luftspaltbasierenden, vertikal auf einem Substrat angeordneten, oberflächenmikromechanisch hergestellten Fabry-Perot-Filtern. Es werden zwei verschiedene Filtervarianten, basierend auf zwei verschiedenen Materialsystemen, ausführlich ...
Dissertation
Micro-electromechanical structural design and optimization of vertical cavity photonic devices with wide continuous tuning
(2005-03-11)
Diese Arbeit umfaßt das elektromechanische Design und die Designoptimierung von weit durchstimmbaren optischen multimembranbasierten Bauelementen, mit vertikal orientierten Kavitäten, basierend auf der Finiten Element Methode (FEM). Ein multimembran InP/Luft Fabry-Pérot optischer Filter wird dargestellt und umfassend analysiert. In dieser Arbeit wird ein systematisches strukturelles Designverfahren dargestellt. Genaue analytische elektromechanischer Modelle für die Bauelemente sind abgeleitet worden. Diese können ...
Dissertation
Development of hybrid UV VCSEL with organic active material and dielectric DBR mirrors for medical, sensoric and data storage applications
(2009-10-19)
Lasers play an important role for medical, sensoric and data storage devices. This thesis is focused on design, technology development, fabrication and characterization of hybrid ultraviolet Vertical-Cavity Surface-Emitting Lasers (UV VCSEL) with organic laser-active material and inorganic distributed Bragg reflectors (DBR).
Multilayer structures with different layer thicknesses, refractive indices and absorption coefficients of the inorganic materials were studied using theoretical model calculations. During the ...
Dissertation
Highly Sensitive Sensor Based On Intracavity Laser Absorption Spectroscopy By Means of Relative Intensity Noise
(2011-01-07)
This thesis concerns with the main aspects of medical trace molecules detection by means of intracavity laser absorption spectroscopy (ICLAS), namely with the equirements for highly sensitive, highly selective, low price, and compact size sensor. A novel two modes semiconductor laser sensor is demonstrated. Its operation principle is based on the competition between these two modes. The sensor sensitivity is improved when the sample is placed inside the two modes laser cavity, and the competition between the two modes ...
Dissertation
Substrate Conformal Imprint Lithography als innovatives Verfahren zur Herstellung von Nanospektrometern im sichtbaren Spektralbereich
(2012-07-16)
Selbstbestimmung und -gestaltung des eigenen Alltages gewinnen immer mehr an Bedeutung, insbesondere für ältere Mitmenschen in ländlichen Regionen, die auf ärztliche Versorgung angewiesen sind. Die Schaffung sogenannter smart personal environments mittels einer Vielzahl von, nahezu unsichtbar installierten Sensoren im gewohnten Lebensraum liefert dem Anwender (lebens-) notwendige Informationen über seine Umgebung oder seinen eigenen Körper. Dabei gilt es nicht den Anwender mit technischen Daten, wie Spektren, zu ...
Dissertation
Development and assessment of volume resolving velocimetry for turbomachinery test facilities
(Deutsches Zentrum für Luft- und Raumfahrt DLR, 2017-12-21)
The present thesis assesses the applicability of volume resolving velocimetry
for turbo machinery test facilities. Tomographic particle image velocimetry has been implemented in a transonic cascade wind tunnel. Assessment is based on 3D-3C measurements of the passage vortex in an axial compressor cascade at subsonic inflow (Ma1=0.6). Results show broad consistency with stereoscopic PIV with improved depth resolution. A novel Fast Multiplicative Algebraic Reconstruction Technique (FMART) enables signi cantly faster ...
Dissertation
Optical Sensor Array based Nanospectrometer: Fabrication of high resolution 3D NanoImprint master templates and bonding of Fabry-Pérot filter array onto photodetector array
(2017-05-11)
In the field of optical spectroscopy, spectrometers are high resolution optical sensors that have emerged as a platform for a wide range of application fields. Commercially available spectrometers are bulky and expensive. Hence, this limits its integration into modern mobile and wearable devices. To overcome this limitation, miniaturization of spectrometers is an interesting target for a wide range of emerging applications. The most attractive concept of fabricating miniaturized spectrometers is the Fabry-Pérot filter ...
Dissertation
Mixed Signal CMOS ASIC mit integrierten frei verschaltbaren Photodioden und Signalvorverarbeitung zur adaptierbaren Ortsfrequenzfilterung
(2016-12-15)
Die vorliegende Arbeit untersucht die Integrierbarkeit von Photodioden und zugehörigen Signalvorverarbeitungen mit dem preisgünstigen Standard-0,5-µm-Prozess bzw. 0,35-µm-CMOS-Prozess. Als Pilotanwendung wurde die Realisierung eines flexiblen Ortfrequenzfilters vorgesehen, der durch die Verschaltung und die Wichtung von integrierten Photodioden gebildet wird.
Mit einem integrierten optoelektronischen Bauteil (Opto-ASIC) sollte die Funktionaliät eines CORREVIT®-Sensors (der Firma Corrsys 3D Sensors) aus Prismengitter, ...