Suche
Anzeige der Dokumente 1-10 von 22
Aufsatz
Wie können Systeme künstlicher Intelligenz ohne Qualitätsverlust rechtsverträglich gestaltet werden?
(2020-03-03)
Künstliche intelligente (KI)-Systeme erfreuen sich immer größerer Beliebtheit. Im Alltag erleben wir KI beispielsweise durch smarte persönliche Assistenten (SPAs), welche von Amazon, Google und Co. angeboten werden. Zwar haben diese KI-Systeme große Nutzungspotenziale, gleichzeitig gehen damit aber auch erhebliche Risiken einher, beispielsweise datenschutzrechtliche. Doch wie lassen sich diese Spannungsfelder auflösen? Interdisziplinäre Gestaltungsmuster im Systementwicklungsprozess können eine Lösung darstellen, ...
Aufsatz
Comparison Between Two Hydrodynamic Models in Simulating Physical Processes of a Reservoir with Complex Morphology: Maroon Reservoir
(2020-03-14)
Two 3D hydrodynamic models, AEM3D and MIKE3, are compared in simulating hydrodynamics of the Maroon Reservoir in southwest Iran. The reservoir has a complex bathymetry with steep walls, which makes it a good case for studying the performance of hydrodynamic models. The models were compared together and with measured water temperatures from different locations of the reservoir in a five-month period between December 2011 and April 2012. The results indicated that the AEM3D model, which uses a finite difference scheme ...
Aufsatz
A modification of a traditional Ethiopian maize store for solar powered ambient drying to reduce post-harvest losses
(2020-07-14)
A gombisa is a traditional Ethiopian structure widely used for maize storage over several months. It lacks adequate ventilation for timely moisture removal, which promotes mold development and aflatoxin production. In this study, a traditional gombisa was compared to one modified by installing a solar powered fan to provide forced ambient air ventilation during daytime. Approximately 900 kg of moist ear maize were loaded into each structure and samples from selected locations were weighed periodically to monitor ...
Aufsatz
Willingness-to-Pay for District Heating from Renewables of Private Households in Germany
(2020-05-18)
Recent discussion about future energy production promotes the recovery of industrial heat as a potential solution to reduce carbon emissions. Experts call for an expansion of central heating by renewable energy systems to ensure a decarbonization of energy systems. In this context, district heating could play a significant role in city and district planning. Nonetheless, for private households, environmental aspects are only one factor amongst others as, e.g., capital costs, comfort and security. In this study, we ...
Aufsatz
First-Order Shape Derivative of the Energy for Elastic Plates with Rigid Inclusions and Interfacial Cracks
(2020-11-16)
Within the framework of Kirchhoff–Love plate theory, we analyze a variational model for elastic plates with rigid inclusions and interfacial cracks. The main feature of the model is a fully coupled nonpenetration condition that involves both the normal component of the longitudinal displacements and the normal derivative of the transverse deflection of the crack faces. Without making any artificial assumptions on the crack geometry and shape variation, we prove that the first-order shape derivative of the potential ...
Aufsatz
A Critical Review and Assessment of Different Thermoviscoplastic Material Models for Simultaneous Hot/Cold Forging Analysis
(2020-05-26)
The simultaneous hot/cold forging is an innovative production process, taking advantage of the high accuracy for cold forming and low forces for hot forming. However, the choice of a suitable material model for such a large temperature range is a difficult issue and insufficiently regarded. Hence, the aim of this contribution is a critical review and assessment of the prediction capability and accuracy of three already existing thermo-viscoplasticity models. Therefore, the simulation results of the Bammann, Chiesa ...
Aufsatz
A Study on the Influence of the Chemical Nature of Fillers on Rheological and Fatigue Behavior of Bitumen Emulsion Mastic
(2020-10-16)
Cold Bitumen Emulsion (CBE) mixture technologies have been recently developed to lower pavement construction temperatures to reduce environmental costs and control gas emissions. Due to its poor early mechanical strength, active fillers (i.e., cement) have been used to obtain high early sti ness in order to have the potential for timely construction of the next layer. There is, however, a lack of understanding about the impact of active fillers on the viscoelastic behavior and fatigue damage resistance of CBE mastics. ...
Aufsatz
Engineering Challenges Ahead for Robot Teamwork in Dynamic Environments
(2020-02-18)
The increasing number of robots around us creates a demand for connecting these robots in order to achieve goal-driven teamwork in heterogeneous multi-robot systems. In this paper, we focus on robot teamwork specifically in dynamic environments. While the conceptual modeling of multi-agent teamwork was studied extensively during the last two decades and commercial multi-agent applications were built based on the theoretical foundations, the steadily increasing use of autonomous robots in many application domains gave ...
Aufsatz
Grain-Size Specific Characterisation and Resource Potentials of Municipal Solid Waste Incineration (MSWI) Bottom Ash: A German Case Study
(2020-05-31)
Municipal solid waste incineration (MSWI) is a major element of modern waste management and produces annually around 5.7 million tonnes of bottom ash (BA) in Germany. In order to save natural resources and protect the environment, utilisable materials need to be recovered from BA. It was the aim of the present study to determine metal and mineral resource potentials of MSWI BA based on a characterisation study of raw and aged BA of the MSWI plant in Kassel (Germany). The BA investigated consisted of 82.2% mineral ...
Aufsatz
On the Influence of Surface Hardening Treatments on Microstructure Evolution and Residual Stress in Microalloyed Medium Carbon Steel
(2020-06-09)
Tailoring surface properties is a key to superior performance of components subjected to fatigue loadings in application. Process–microstructure–property relationships have to be established to allow for optimization of techniques employed for surface treatments such as deep rolling and induction hardening. Although both techniques are employed widely in industrial application, studies examining microstructure evolution and residual stress states for a single material in a comparative manner are missing. Amongst ...