Suche
Anzeige der Dokumente 1-9 von 9
Aufsatz
A simulation-based approach to evaluate objective material parameters from concrete rheometer measurements
(2019-12-31)
Modern concretes such as ultra-high performance concrete (UHPC) show excellent strength properties combined with favorable flow properties. However, the flow properties depend strongly on process parameters during production (temperature, humidity etc.), but also change sensitively even with slight variations in the mixture. In order to ensure desired processing of the fluidlike material and consistent process quality, the flow properties of the concrete must be evaluated quantitatively and objectively. The usual ...
Aufsatz
Two-dimensional Wrinkle Resonators for Random Lasing in Organic Glasses
(2020-02-12)
Random lasers consisting of slab waveguides with two-dimensional disordered wrinkling patterns that act as scattering resonators are reported. As active material 2,2′,7,7′-tetraphenyl-9,9′-spirobifluorene is used which is sandwiched between an oxidized silicon wafer and a cladding with higher glass transition temperature. Wrinkles with tailorable periodicity have been induced by thermal annealing. Photopumping experiments show the transition from amplified spontaneous emission to a multiple peak laser spectrum with ...
Aufsatz
3D Micro/Nanopatterning of a Vinylferrocene Copolymer
(2020-05-23)
In nanoimprint lithography (NIL), a pattern is created by mechanical deformation of an imprint resist via embossing with a stamp, where the adhesion behavior during the filling of the imprint stamp and its subsequent detachment may impose some practical challenges. Here we explored thermal and reverse NIL patterning of polyvinylferrocene and vinylferrocene-methyl methacrylate copolymers to prepare complex non-spherical objects and patterns. While neat polyvinylferrocene was found to be unsuitable for NIL, freshly-prepared ...
Aufsatz
3D Arrangement of Magnetic Particles in Thin Polymer Films Assisted by Magnetically Patterned Exchange Bias Layer Systems
(2021-10-31)
The possibility to arrange and embed magnetic micro- and nanoparticles in thin polymer film systems using flat magnetically patterned substrate templates is investigated. In contrast to self-organized particle rows forming by applying a homogeneous magnetic field, particles adapt to the magnetic field landscape of the substrate's magnetic pattern prior to polymer crosslinking. Crosslinking then fixes the particle positions in the polymer. The process is tested for composites of hydrophobic polydimethylsiloxane (PDMS) ...
Aufsatz
Influence of Accelerated Aging on the Fiber-Matrix Adhesion of Regenerated Cellulose Fiber-Reinforced Bio-Polyamide
(2023-03-23)
With regard to the sustainability and biological origin of plastic components, regenerated cellulose fiber (RCF)-reinforced polymers are expected to replace other composites in the future. For use under severe conditions, for example, as a housing in the engine compartment, the resistance of the composites and the impact on the fiber and fiber-matrix adhesion must be investigated. Composites of bio-polyamide with a reinforcement of 20 wt.% RCF were compounded using a twinscrew extruder. The test specimens were ...
Aufsatz
Theoretical study of spin polarization in multiphoton ionization of Xe
(2023-04-21)
Spin polarization in the multiphoton above-threshold ionization of 5p3/2- and 5p1/2-electrons of Xe with intense 395nm, circularly polarized laser pulses, is investigated theoretically. For this purpose, we solve the time-dependent Schrödinger equation on the basis of spherical spinors. We, thus, simultaneously propagate the spin-up and spin-down single-active-electron wave packets, driven by the laser pulses in the ionic potential, which includes the spin–orbit interaction explicitly. The present theoretical results ...
Aufsatz
Observation of a Long-lived Electronic Coherence Modulated by Vibrational Dynamics in Molecular Nd³+- Complexes at Room Temperature
(2023-03-23)
Temporally delayed, phase-locked coherent pairs of near IR femtosecond laser pulses were employed to study electronic coherences in molecular Nd³+-complexes at room temperature. Dissolved and solid complexes were studied under a confocal microscope set-up with fluorescence detection. The observed electronic coherence on a few hundred femtoseconds time scale is modulated by additional coherent wave packet dynamics, which we attribute mainly to be vibrational in nature. In future, the complexes may serve as prototypes ...
Aufsatz
Influence of Ethylene Oxide and Gamma Irradiation Sterilization Processes on the Properties of Poly-L-Lactic-Acid (PLLA) Materials
(2023-08-18)
In order to encourage the substitution of petrochemical polymers in medical technology with sustainable, bio-based materials, there is an urgent need for further investigations, especially data regarding their sterility performance. Within the scope of the investigations, selected material properties of poly-L-lactic-acid (PLLA), a specific type of poly(lactic-acid) (PLA), were analyzed before and after sterilization (using ethylene oxide or gamma irradiation) in order to investigate deviations in its chemical ...
Aufsatz
Influence of Chitosan and Grape Seed Extract on Thermal and Mechanical Properties of PLA Blends
(2023-03-22)
Blends based on polylactic acid (PLA), chitosan, and grape seed extract (GE) were prepared by extrusion and injection molding. The effect of chitosan (5% and 15% on PLA basis) and natural extract (1% on PLA basis) incorporated into the PLA host matrix was explored regarding the thermal and mechanical properties. GE showed antioxidant activity, as determined by the DPPH assay method. Chitosan and GE affect the degree of crystallinity up to 30% as the polysaccharide acts as a nucleating agent, while the extract reduces ...