Suche
Anzeige der Dokumente 181-190 von 401
Aufsatz
Effects of Aging under Stress on Mechanical Properties and Microstructure of EN AW 7075 Alloy
(2021-07-20)
In the present study, microstructural and mechanical properties of EN AW 7075 following stress-aging were assessed. For this purpose, properties of stress-aged samples were compared with values obtained for conventionally aged counterparts. It is revealed that the strength and hardness of EN AW 7075 can be increased by the presence of external stresses during aging. Precipitation kinetics were found to be accelerated. The effects of conventional and stress-aging on the microstructure were analyzed using synergetic ...
Aufsatz
Effect of Friction Stir Processing on Microstructural, Mechanical, and Corrosion Properties of Al-Si12 Additive Manufactured Components
(2020-01-03)
Additive manufacturing (AM) is an advanced manufacturing process that provides the opportunity to build geometrically complex and highly individualized lightweight structures. Despite its many advantages, additively manufactured components suffer from poor surface quality. To
locally improve the surface quality and homogenize the microstructure, friction stir processing (FSP) technique was applied on Al-Si12 components produced by selective laser melting (SLM) using two different working media. The effect of FSP on ...
Aufsatz
Influence of complex geometries on the properties of laser-hardened surfaces
(2020-04-25)
Laser surface hardening provides for many advantages in terms of flexible production due to very localized and controlled energy input into the material. Laser processing offers the possibility to treat surfaces in order to locally strengthen the areas that are prone to fatigue cracking. It is well known that laser energy absorption depends on many parameters, e.g., the surface structure and the surface orientation. The incident angle of the laser beam plays a key role in this regard. When complex geometries like ...
Dissertation
Ergonomieassistenz
(2018-12-18)
Die Dissertation entwickelt und evaluiert Assistenzkonzepte in den Modalitäten visuell, auditiv und taktil zur Rückmeldung unergonomischen Verhaltens. Aufbauend auf den theoretischen Grundlagen der Assistenzsysteme, der Wahrnehmungsmodalitäten, der menschlichen Informationsverarbeitung und der adäquaten Assistenz erfolgte die Entwicklung der Assistenzkonzepte. Zur Anwendung kamen eine Augmented-Reality-Brille mit symbolischen Darstellungen in der visuellen Modalität, Kopfhörer mit Auditory Icons für den auditiven ...
Dissertation
Modellierung von offenen Absorptionsanlagen zur Raum- und Prozessluftentfeuchtung
(2023)
Luftentfeuchtung erfolgt in herkömmlichen Trocknungs- und Klimatisierungsanlagen durch eine Kühlung der feuchten Luft unter ihren Taupunkt (Kondensationsentfeuchter) und einer anschließenden Erwärmung bis zu der gewünschten Temperatur. Das Prinzip dieser Betriebsweise birgt einen unnötigen Stromverbrauch. In der vorliegenden Dissertation wird daher ein alternatives Luftentfeuchtungsverfahren beschrieben, bei dem die Luftentfeuchtung durch einen offenen Absorptionsprozess realisiert wird. In dem offenen Absorptionsprozess ...
Aufsatz
Effect of Post-Process Machining on Surface Properties of Additively Manufactured H13 Tool Steel
(2018-08-28)
Der Werkzeugstahl AISI H13 zeichnet sich durch einen hohen Verschleißwiderstand und eine gute Temperaturwechselbeständigkeit aus. Hauptanwendungsbereiche des H13 sind Druckguss- und Schmiedewerkzeuge. Die Verarbeitung von H13 durch additive Fertigungsverfahren, wie z. B. dem selektiven Laserschmelzen (selective laser melting, SLM), eröffnet neue Gestaltungsmöglichkeiten, wie z. B. die Integration interner Kühlkanäle, die es erlauben, das Einsatzverhalten der Werkzeuge zu verbessern. Aufgrund hoher Oberflächenrauheiten ...
Aufsatz
A Screening Approach for Rapid Qualitative Evaluation of Residual-Stress States – Application to Laser-Hardened Microalloyed Steel
(2019-06-11)
Surface hardening and compressive residual stresses are keys to superior part performance in numerous applications. In this context the development of advanced laser surface treatments for new materials and complex sample shapes is a time con-suming process. Eventually, determination of residual stress states by means of X-ray diffraction in the whole surface and subsurface region, respectively, is one of the main time consuming facors in terms of characterization. In many applications the provision of an adequate ...
Aufsatz
Consequences of Deep Rolling at Elevated Temperature on Near-Surface and Fatigue Properties of High-Manganese TWIP Steel X40MnCrAl19-2
(2021-11-05)
Due to pronounced work-hardening induced by the complex interplay of deformation mechanisms such as dislocation slip, twinning and/or martensitic phase transformation, high-manganese steels represent a class of materials well-suited for mechanical surface treatment. In the present study, the fatigue behavior of a high-mangsanese steel showing twinning-induced plasticity (TWIP) effect at room temperature (RT) was investigated after deep rolling at 550 °C. Results are compared to a former study discussing the behavior ...
Aufsatz
Martensite aging in ⟨001⟩ oriented Co₄₉ Ni₂₁ Ga₃₀ single crystals in tension
(2018-03-22)
Co–Ni–Ga high-temperature shape memory alloys (HT-SMAs) are well-known candidate materials for damping applications at elevated temperatures. Recent studies showed that upon heat treatment in stress-induced martensite under compressive loads transformation temperatures can be increased significantly, qualifying Co–Ni–Ga for HT-actuation. The increase in transformation temperatures is related to a change in chemical order recently validated via neutron diffraction experiments. Since SMAs show distinct tension–compression ...
Masterarbeit
Vergleich & Anpassung zweier Strategien zur Anomalieerkennung in Lastgängen basierend auf Verfahren aus den Bereichen Machine-Learning und Statistik
(2020-11)
In dieser Masterarbeit werden zwei Strategien zur Anomalieerkennung in Lastgängen ausgewertet. Dazu nutzt Strategie 1 das künstliche neuronale Netzwerk LSTM (Long Short-Term Memory) mit Datenzeitraum von einem Monat (1M) bzw. drei Monaten (3M) trainiert und Strategie 2 das Glättungsverfahren PEWMA (Probalistic Exponential Weighted Moving Average) zur Schätzung des zu untersuchenden Lastgangmonats. Durch den Vergleich mit Originallastgangdaten werden Residuen bzw. summierte Residuen der Sequenzlängen zwei, vier, sechs ...