Suche
Anzeige der Dokumente 11-20 von 42
Aufsatz
Predictive Simulation-based Optimisation of Cooling System Including a Sprinkler Tank
(2018)
Prerequisite for an efficient cooling energy system is the knowledge and the optimal combination of different operating conditions of individual compression and free cooling chillers. The performance of cooling systems depends on its part load performance and its condensing temperature, which are often unknown. Recorded energy data remains unused and manufacturers' data significantly differs from the real performance. For this purpose, manufacturer and real data are combined and continuously adapted to form partial ...
Aufsatz
System efficient integration of standby control and heat pump storage systems in manufacturing processes
(2019-05-24)
Prerequisite for system efficiency towards an industrial energy transition is the reducing of energy demand on the process level. In typical manufacturing systems with machine tools and washing machines, the proper design of intelligent standby control and heat pump storage system (HPS) represent high efficiency. The integration of HPS is complicated due to high non-continuity, especially when implementing a standby control system. Our approach aims at designing one single HPS for multiple heat sources and sinks. ...
Aufsatz
Optimal energy supply structures for industrial food processing sites in different countries considering energy transitions
(2017-05-10)
This study focuses on analysing the most energy efficient utility system supply structure in terms of carbon emissions, primary energy efficiency and energy costs. In the German food processing industry, the state-of-the-art technologies in the utility supply structure are a gas fired steam boiler for steam generation and ammonia chillers for chilled water generation. Low investment costs and its durability are attractive for industrial production sites. But, given the ongoing energy transition to renewable energy, ...
Teil eines Buches
Prädiktive simulationsgestützte Optimierung von Kältemaschinen im Verbund
(kassel university press, 2017)
Prerequisite for an efficient cooling energy system is the knowledge and the optimal combination of different operating conditions of individual compression chillers. The performance of cooling systems depending on its part load performance and its condensing temperature are often unknown. Recorded energy data remains unused and manufacturers' data differs significantly from the real performance. For this purpose, manufacturer and real data are combined and continuously adapted to form partial load curve models. A ...
Aufsatz
Process and utility systems integration and optimisation for ultra-low energy milk powder production
(2017-04-26)
This study applies a Total Site Heat Integration approach in conjunction with a detailed process and utility model, to develop an innovative ultra-low energy milk powder plant design. The basis for the analysis is a state-of-the-art modern milk powder plant that requires 5265 MJ/tp of fuel and 210.5 kWh/tp (58.5 MJe/tp) of electricity. The model of the modern milk powder plant was validated against industrial data and changes to process and/or utility systems are targeted and implemented into the model to understand ...
Aufsatz
Automatic Time Series Segmentation as the Basis for Unsupervised, Non-Intrusive Load Monitoring of Machine Tools
(2019)
Detailed energy monitoring and benchmarking at the individual component level is necessary to increase energy efficiency in complex production systems. Non-intrusive load monitoring (NILM) provides an economical solution for operational state detection and load disaggregation without the need for large-scale use of fine-grained energy meters. Existing supervised NILM approaches require detailed training data including control information about individual devices. Unsupervised approaches, on the other hand, often ...
Aufsatz
Total Site Utility Systems Optimisation for Milk Powder Production
(2016)
This study applies the Total Site Heat Integration method, in conjunction with a detailed process and utility model, to investigate three methods to increase the energy efficiency of the utility supply system for milk powder production. Sequentially explored opportunities are: (1) increasing boiler efficiency through condensing economisers, (2) waste heat recovery from the chiller unit, and (3) Combined Heat and Power (CHP) for electricity production. The basis for the analysis is the anticipated future milk powder ...
Bachelorarbeit
Entwicklung einer KMU-spezifischen Einschätzungsmethode der Unternehmenssituation im Kontext von Industrie 4.0
(2020)
Das Ziel dieser Arbeit besteht in der Entwicklung einer KMU-spezifischen Einschätzungsmethode der Unternehmenssituation im Kontext von Industrie 4.0, die die Definition von Digitalisierungsgraden – unter anderem hinsichtlich der Digitalen Planung – ermöglicht. Dafür ist es notwendig, den aktuellen Forschungsstand der Digitalen Transformation in der Industrie – insbesondere im KMU-Umfeld – durch eine systematische Literaturrecherche aufzuzeigen. Hierbei soll auch ein Überblick über bestehende Transformationsprojekte ...
Aufsatz
Assessment of probabilistic distributed factors influencing renewable energy supply for hotels using Monte-Carlo methods
(2017-04-05)
This paper investigates the use of renewable energies to supply hotels in island regions. The aim is to evaluate the effect of weather and occupancy fluctuations on the sensitivity of investment criteria. The sensitivity of the chosen energy system is examined using a Monte Carlo simulation considering stochastic weather data, occupancy rates and energy needs. For this purpose, algorithms based on measured data are developed and applied to a case study on the Canary Islands.
The results underline that electricity ...
Aufsatz
Increasing energy efficiency of milk product batch sterilisation
(2018-09-07)
The food industry is a large energy consumer and most heat demands in food processing are low-temperature. The aim of this study is to develop and simulate innovative retrofits or redesigns that unlock the heat recovery potential of industrial batch sterilisation processes. The case study focuses on the whey cream process, although the method and results apply to similar batch sterilisation processes. The initial situation is compared to energy efficient designs based on “Energy Storage” and “Rescheduling”. Using a ...