Suche
Anzeige der Dokumente 51-60 von 67
Aufsatz
Innovative Materials for Novel Concepts for Internal Heat Exchangers
(2018-07-27)
Internal heat exchangers are often employed in solar thermal applications as well as in many other applications that involve heat, and, for the most part, consist of metallic materials (copper, stainless steel). Corrugated stainless steel tubes are easy to assemble, and are commonly used in various storage geometries. In order to significantly reduce costs, alternative materials, such as plastics, can function as excellent substitutes. Alternative heat exchangers for the following examinations using various materials ...
Aufsatz
The Manufacture of Hot-Compacted Layered Composite Systems Made of Oriented Semifinished PP-Films
(2014-03-04)
Monoaxial stretched PP-films are used for the manufacture of hot-compacted layered composites. These are layered with stretched co-extruded coupling agent films, and are consolidated to laminates by means of a hot-compaction process, which employs pressure and temperature. This paper aims to examine the influence of the process settings on the properties of the composites during the hot-compaction process. For this purpose, the mechanical values will be determined by means of tensile testing variously compacted and ...
Buch
Thermo-mechanische Gradierung eigenverstärkter Polypropylen-Composite
(kassel university press, 2015)
Eigenverstärkte Polypropylen-Composite weisen ein enormes Leichtbaupotential und überdurchschnittliche mechanische Grundeigenschaften auf. Das Eigenschaftsspektrum lässt sich auf die makromolekulare Orientierung oder sog. Eigenverstärkung der eingesetzten textilen Faser- und Bändchenhalbzeuge zurückführen, welche die Ausgangsbasis der Schichtverbunde bilden. Über eine gezielte Prozessführung kann die Eigenverstärkung bis ins heißkompaktierte Bauteil hinein kontrolliert und erhalten werden, wobei sich das Eigenschaftsspektrum ...
Buch
Rotatives Vibrationsschweißen
(kassel university press, 2017)
Schweißversuche mit den von dem Schweißmaschinenhersteller Fischer Kunststoff-Schweißtechnik GmbH entwickelten Prototypenmaschinen für das neuartige Rotative Vibrationsschweißen zeigen eine vergleichbare erforderliche Prozessführung und die bereits bekannten Ausprägungen der vier Schweißprozessphasen anderer Vibrationsschweißverfahren. Unter Verwendung unterschiedlicher Werkstoffe und Probekörpergeometrien zeigt sich, dass sich die Fügenahteigenschaften von mit dem Rotativen Vibrationsschweißverfahren gefügten ...
Buch
Beitrag zur Herstellung 3-dimensionaler Kunststoffscheiben mit integrierter Funktion zur Veränderung der Transparenz durch Elektrochromie
(kassel university press, 2017)
Ziel dieser Arbeit ist es Möglichkeiten der Kunststoffverarbeitung aufzuzeigen, um feste 3D Bauteile mit elektrochromen (EC) Eigenschaften herzustellen. Die momentanen EC Anwendungen reduzieren sich fast ausschließlich auf plane Fensterscheiben aus Glas für die Gebäudeverglasung. Vereinzelt gibt oder gab es aber auch Anwendungen im Flugzeug- und Automobilbau. Die Anforderungen bezüglich des Schaltverhaltens sind in den erwähnten Bereichen sehr hoch und führen zu einer kostenintensiven Produktion.
Am Anfang der Arbeit ...
Buch
Struktur-Eigenschafts-Beziehung von Mischungen aus thermoplastischem PMMA mit vernetzten PMMA-Kolloiden
(kassel university press, 2016)
Ziel dieser Arbeit war es, ein Compound aus Partikeln aus untereinander vernetzten Polymerketten, sogenannten Kolloiden, und thermoplastischem Matrixmaterial basierend auf dem gleichen Monomer (MMA) aus ingenieurwissenschaftlicher Sicht zu charakterisieren und die Struktur-Eigenschafts-Beziehungen zu klären. Durchgeführt wurden die Untersuchungen an Compounds mit Kolloiden mit verschiedenen Größen, Vernetzungsgraden und Anteilen, die zunächst in Benzol mit dem Matrixmaterial, Plexiglas® 6N, vermischt wurden.
Neben ...
Aufsatz
Promoting abnormal grain growth in Fe-based shape memory alloys through compositional adjustments
(2019-05-28)
Iron-based shape memory alloys are promising candidates for large-scale structural applications due to their cost efficiency and the possibility of using conventional processing routes from the steel industry. However, recently developed alloy systems like Fe–Mn–Al–Ni suffer from low recoverability if the grains do not completely cover the sample cross-section. To overcome this issue, here we show that small amounts of titanium added to Fe–Mn–Al–Ni significantly enhance abnormal grain growth due to a considerable ...
Aufsatz
Cyclic degradation of Co49Ni21Ga30 high-temperature shape memory alloy - On the roles of dislocation activity and chemical order
(2015)
Conventional shape memory alloys (SMAs), such as binary Ni-Ti, are typically limited to service temperatures below 100 °C. Recent studies on Co-Ni-Ga high temperature (HT) SMAs revealed the potential that these alloys can be used up to temperatures of about 400 °C. Analysis of the cyclic functional properties showed that degradation in these alloys is mainly triggered by intensive dislocation motion. However, data on the cyclic stress-strain response and the mechanisms leading to functional degradation of Co-Ni-Ga ...
Aufsatz
On the Effect of Quenching on Postweld Heat Treatment of Friction-Stir-Welded Aluminum 7075 Alloy
(2019)
This work focuses on the effect of postweld heat treatment (PWHT) on the mechanical properties and microstructural evolution of aluminum 7075 alloy processed via friction stir welding (FSW). FSW is known to be capable of grain refinement in the nugget zone (NZ). Two different quench media (water and air) were employed for PWHT. Regardless of the quench media, the PWHT led to the occurrence of grain growth in the NZ of the FSWed aluminum 7075 alloy. Abnormal grain growth occurred in the water quenched specimen. It is ...
Aufsatz
Cyclic Deformation Response of Ultra-fine Grained Titanium at Elevated Temperatures
(2019)
This study focuses on the high-temperature cyclic deformation response (CDR) of ultra-fine grained (UFG) titanium of commercial purity (grade 4) processed via equal channel angular extrusion as a severe plastic deformation method. Low-cycle fatigue experiments were conducted at elevated temperatures up to 600 °C and at strain amplitudes ranging from 0.2% to 0.6%. Besides temperature and strain amplitude, the influence of two processing routes (8BC and 8E) on the fatigue characteristics of UFG Ti was examined. It is ...