Suche
Anzeige der Dokumente 1071-1080 von 1465
Dissertation
THz Plasma Waves in Field-Effect-Transistors: A Monte Carlo Study
(2016-02-10)
Sensing with electromagnetic waves having frequencies in the Terahertz-range is a very attractive investigative method with applications in fundamental research and industrial settings. Up to now, a lot of sources and detectors are available. However, most of these systems are bulky and have to be used in controllable environments such as laboratories. In 1993 Dyakonov and Shur suggested that plasma waves developing in field-effect-transistors can be used to emit and detect THz-radiation. Later on, it was shown that ...
Dissertation
Optimization in the Technological Steps for the Fabrication of Large Area Micromirror Arrays
(2015-02-23)
Micromirror arrays are a very strong candidate for future energy saving applications. Within this work, the fabrication process for these micromirror arrays has been optimized and some steps for the large area fabrication of micromirror modules were performed. At first the surface roughness of the insulation layer of silicon dioxide (SiO2) was investigated. This SiO2 thin layer was deposited on three different type of substrates i.e. silicon, glass and Polyethylene Naphthalate (PEN) substrates. The deposition ...
Dissertation
Development, Evaluation and Optimization of Fabrication Processes for Daylight Guiding Systems Based on Micromirror Arrays
(2017-01-11)
In this work, fabrication processes for daylight guiding systems based on micromirror arrays are developed, evaluated and optimized.Two different approaches are used: At first, nanoimprint lithography is used to fabricate large area micromirrors by means of Substrate Conformal Imprint Lithography (SCIL).Secondly,a new lithography technique is developed using a novel bi-layered photomask to fabricate large area micromirror arrays. The experimental results showing a reproducible stable process, high yield, and is ...
Dissertation
Interferometrisch messender faseroptischer Sensor mit mechanisch oszillierender Sonde
(2015-07-14)
Punktförmig messende optische Sensoren zum Erfassen von Oberflächentopografien im Nanometerbereich werden in der Forschung und Industrie benötigt. Dennoch ist die Auswahl unterschiedlicher Technologien und kommerziell verfügbarer Sensoren gering. In dieser Dissertationsschrift werden die wesentlichen Aspekte eines Messsystems untersucht das über das Potenzial verfügt, zu den künftigen Standardmessmethoden zu gehören. Das Messprinzip beruht auf einem Common-Path-Interferometer. In einer mikrooptischen Sonde wird das ...
Dissertation
Experimentelle Untersuchung des Optimierungspotenzials in der kurzkohärenten Interferenzmikroskopie
(2016-03-17)
Die vorliegende Arbeit befasst sich mit dem lateralen Auflösungsvermögen in der kurzkohärenten Interferenzmikroskopie. Das 3D-Auflösungsvermögen von Phasenobjekten ist im Gegensatz zu dem von Intensitätsobjekten stark nichtlinear und vom spezifischen Messverfahren abhängig. In diesem Zusammenhang sind systematische Messfehler von entscheidender Bedeutung. Für die kurzkohärente Interferenzmikroskopie ist das Überschwingen an Kanten von besonderem Belang, da sich der Effekt bei der Messung vieler technischer Oberflächen ...
Dissertation
Model Calculations for Characterisation and Implementation of Vertical Thin-Layer Structures with Distributed Cavity Mode for Filter and Laser Applications
(2018-04-11)
This work focusses on the approach of optical thin-layer filters with distributed cavity mode. Fabry-Pérot filters own a single cavity layer in the centre of the stack. In contrast, with chirped filter approach the cavity thickness is distributed over several layers. Model calculation results are applied to characterise the properties of the spectrum and the electric field of chirped filters. The aim of distributing the cavity within the filter stack is to distribute the electric field in the resonance case (transmission ...
Dissertation
Air-gap based vertical cavity micro-opto-electro-mechanical Fabry-Perot filters
(2006-03-02)
Mikrooptische Filter sind heutzutage in vielen Bereichen in der Telekommunikation unersetzlich. Wichtige Einsatzgebiete sind aber auch spektroskopische Systeme in der Medizin-, Prozess- und Umwelttechnik. Diese Arbeit befasst sich mit der Technologieentwicklung und Herstellung von luftspaltbasierenden, vertikal auf einem Substrat angeordneten, oberflächenmikromechanisch hergestellten Fabry-Perot-Filtern. Es werden zwei verschiedene Filtervarianten, basierend auf zwei verschiedenen Materialsystemen, ausführlich ...
Dissertation
Patent DE10 2004 037 519 B4 “Sensor Process and Device for Determining a Physical Value“. A Proof of Concept
(2010-06-11)
At present, a fraction of 0.1 - 0.2% of the patients undergoing surgery become aware during the process. The situation is referred to as anesthesia awareness and is obviously very traumatic for the person experiencing it. The reason for its occurrence is mostly an insufficient dosage of the narcotic Propofol combined with the incapability of the technology monitoring the depth of the patient’s anesthetic state to notice the patient becoming aware.
A solution can be a highly sensitive and selective real time monitoring ...
Dissertation
Large-Size AlGaN/GaN HEMT Large-Signal Electrothermal Characterization and Modeling for Wireless Digital Communications
(2012-03-29)
The rapid growth in high data rate communication systems has introduced new high spectral efficient modulation techniques and standards such as LTE-A (long term evolution-advanced) for 4G (4th generation) systems. These techniques have provided a broader bandwidth but introduced high peak-to-average power ratio (PAR) problem at the high power amplifier (HPA) level of the communication system base transceiver station (BTS). To avoid spectral spreading due to high PAR, stringent requirement on linearity is needed which ...
Dissertation
Micro-electromechanical structural design and optimization of vertical cavity photonic devices with wide continuous tuning
(2005-03-11)
Diese Arbeit umfaßt das elektromechanische Design und die Designoptimierung von weit durchstimmbaren optischen multimembranbasierten Bauelementen, mit vertikal orientierten Kavitäten, basierend auf der Finiten Element Methode (FEM). Ein multimembran InP/Luft Fabry-Pérot optischer Filter wird dargestellt und umfassend analysiert. In dieser Arbeit wird ein systematisches strukturelles Designverfahren dargestellt. Genaue analytische elektromechanischer Modelle für die Bauelemente sind abgeleitet worden. Diese können ...