Suche
Anzeige der Dokumente 51-60 von 127
Dissertation
Proaktive Tätigkeitsunterstützung
(2018-12)
In der vorliegenden Dissertation wird eine Methode zur Identifikation von durchgeführten Tätigkeiten anhand der Pupillendynamik entwickelt. Dieses Methode bildet die Grundlage für eine kontextabhängige Unterstützung bei der Durchführung von Tätigkeiten durch ein Nutzerassistenzsystem. Hierzu werden aus der Literatur Merkmale zusammengetragen, die sich aus der Pupillendynamik ableiten lassen und sich zur Kontexterkennung eignen. Aufbauend auf diesen grundlegenden Merkmalen, werden differenziertere Merkmale entwickelt, ...
Teil eines Buches
Prädiktive simulationsgestützte Optimierung von Kältemaschinen im Verbund
(kassel university press, 2017)
Prerequisite for an efficient cooling energy system is the knowledge and the optimal combination of different operating conditions of individual compression chillers. The performance of cooling systems depending on its part load performance and its condensing temperature are often unknown. Recorded energy data remains unused and manufacturers' data differs significantly from the real performance. For this purpose, manufacturer and real data are combined and continuously adapted to form partial load curve models. A ...
Aufsatz
Constitutive modeling of nonlinear reversible and irreversible ferromagnetic behaviors and application to multiferroic composites
(2016-03-10)
The coupling of magnetic and mechanical fields due to the constitutive behavior of a material is commonly denoted as magnetostrictive effect. The latter is only observed with large coupling coefficients in ferromagnetic materials, where coupling is caused by the rotation of the domains as a result of magnetic (Joule effect) or mechanical (Villari effect) loads.
However, only a few elements (e.g. Fe, Ni, Co, and Mn) and their compositions exhibit such a behavior. In this article, the constitutive modeling of nonlinear ...
Aufsatz
Mixed-mode crack tip loading and crack deflection in 1D quasicrystals
(2016)
Quasicrystals (QC) are a new class of materials besides crystals and amorphous solids and have aroused much attention of researchers since they were discovered. This paper presents a generalized fracture theory including the J-integral and crack closure integrals, relations between J1, J2 and the stress intensity factors as well as the implementation of the near-tip stress and displacement solutions of 1D QC. Different crack deflection criteria, i.e. the J-integral and maximum circumferential stress criteria, are ...
Buch
Schlussbericht zum Projekt SimCast – Simulationsgestützte Prognose der Dauer von Logistikprozessen
(2018)
Für den kundenindividuellen Anlagenbau in der Unikat- und Kleinserienfertigung sind die termingerechte Fertigstellung, Lieferung und Inbetriebnahme einer Anlage entscheidende Wettbewerbsfaktoren. Bei der Planung neuer Projekte kann das bisher aus Projekten erworbene Wissen allerdings nicht 1:1 in ein neues Projekt übertragen werden, da die Parameter und die Dauer der Montage- und Logistikprozesse von dem jeweils zu montierenden Bauteil abhängig sind. Aus diesem Grund wird diese Prozessdauer heute nur grob abgeschätzt; ...
Dissertation
Simulation-based optimization of solar thermal systems
(2018)
In this PhD thesis application of numerical methods to simulation-based optimization of solar thermal systems both in the planning process and in operation is investigated. The optimization process starting from definition of a target function and specification of optimization parameters, moving forward with application of an optimization algorithm and ending up by sensitivity analysis at the found optimum, is described in detail. A hybrid genetic CHC – binary search algorithm is proposed and applied. As a combination ...
Konferenzveröffentlichung
Structured Eyetracking-based Requirements Validation with the Help of Virtual Prototypes
(INEGI/Faculdade de Engenharia Universidade do Porto, 2017)
Customer requirements form the basis of every product development project. Incomplete requirements and lack of involvement of customers are the main factors for the failure of a product at the buyer's market (Hull et al. 2011). The Quality Function Deployment (QFD) describes a common method for translating customer requirements into product features. For this purpose, the QFD provides various matrices for the prioritization and quantification of the requirements, through the various phases of the product development. ...
Aufsatz
Characterization of polyamide 6.10 composites incorporated with microcrystalline cellulose fiber: Effects of fiber loading and impact modifier
(2018-08-14)
Microcrystalline cellulose (MCC) fiber‐reinforced polyamide 6.10 (PA) composites were prepared in the presence of an impact modifier (IM), exxelor VA1803 (VA), by melt compounding process. Fiber loading was considered from 20 to 30 wt.%, whereas IM was varied from 2.0 to 5.0 wt.%. Composites were characterized by tensile test, impact test, dynamic thermal mechanical analysis (DTMA), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and X‐ray diffraction (XRD). Composites’ fractured surfaces ...
Aufsatz
A Comparison Study of Liquid Natural Rubber (LNR) and Liquid Epoxidized Natural Rubber (LENR) as the Toughening Agent for Epoxy
(2013)
Rubber-toughened epoxy resins were prepared using the mechanical stirring method and molded into samples by compression molding. The aim of this study is to modify the brittleness of the epoxy matrix by adding discrete rubbery phases to improve the toughness properties. Liquid natural rubber (LNR) and liquid epoxidized natural rubber (LENR) were used as toughening agents in the epoxy resin to compare the properties of the modified networks. The mechanical and thermal properties have been studied to observe the effect ...
Aufsatz
Fabrication and characterization of ethylene–octene copolymer composites with ionic liquid functionalized carbon nanotubes
(2017-10-16)
Modification of multi-walled carbon nanotubes (MWCNTs) by means of imidazolium ionic liquid (IL) was performed. Structural characterization of funtionalized nanofillers (IL-f-MWCNTs) was made by means of Raman spectroscopy and transmission electron microscopy. MWCNTs and IL-f-MWCNTs were introduced within ethylene octane copolymer (EOC) with octene co-monomer content of 17% by using the masterbatch approach. The efficiency of the carbonaceous nanofiller distribution within the polymer matrix was characterized by means ...