Suche
Anzeige der Dokumente 1161-1170 von 1741
Dissertation
Optimization in the Technological Steps for the Fabrication of Large Area Micromirror Arrays
(2015-02-23)
Micromirror arrays are a very strong candidate for future energy saving applications. Within this work, the fabrication process for these micromirror arrays has been optimized and some steps for the large area fabrication of micromirror modules were performed. At first the surface roughness of the insulation layer of silicon dioxide (SiO2) was investigated. This SiO2 thin layer was deposited on three different type of substrates i.e. silicon, glass and Polyethylene Naphthalate (PEN) substrates. The deposition ...
Dissertation
Development, Evaluation and Optimization of Fabrication Processes for Daylight Guiding Systems Based on Micromirror Arrays
(2017-01-11)
In this work, fabrication processes for daylight guiding systems based on micromirror arrays are developed, evaluated and optimized.Two different approaches are used: At first, nanoimprint lithography is used to fabricate large area micromirrors by means of Substrate Conformal Imprint Lithography (SCIL).Secondly,a new lithography technique is developed using a novel bi-layered photomask to fabricate large area micromirror arrays. The experimental results showing a reproducible stable process, high yield, and is ...
Dissertation
Interferometrisch messender faseroptischer Sensor mit mechanisch oszillierender Sonde
(2015-07-14)
Punktförmig messende optische Sensoren zum Erfassen von Oberflächentopografien im Nanometerbereich werden in der Forschung und Industrie benötigt. Dennoch ist die Auswahl unterschiedlicher Technologien und kommerziell verfügbarer Sensoren gering. In dieser Dissertationsschrift werden die wesentlichen Aspekte eines Messsystems untersucht das über das Potenzial verfügt, zu den künftigen Standardmessmethoden zu gehören. Das Messprinzip beruht auf einem Common-Path-Interferometer. In einer mikrooptischen Sonde wird das ...
Dissertation
Experimentelle Untersuchung des Optimierungspotenzials in der kurzkohärenten Interferenzmikroskopie
(2016-03-17)
Die vorliegende Arbeit befasst sich mit dem lateralen Auflösungsvermögen in der kurzkohärenten Interferenzmikroskopie. Das 3D-Auflösungsvermögen von Phasenobjekten ist im Gegensatz zu dem von Intensitätsobjekten stark nichtlinear und vom spezifischen Messverfahren abhängig. In diesem Zusammenhang sind systematische Messfehler von entscheidender Bedeutung. Für die kurzkohärente Interferenzmikroskopie ist das Überschwingen an Kanten von besonderem Belang, da sich der Effekt bei der Messung vieler technischer Oberflächen ...
Dissertation
Model Calculations for Characterisation and Implementation of Vertical Thin-Layer Structures with Distributed Cavity Mode for Filter and Laser Applications
(2018-04-11)
This work focusses on the approach of optical thin-layer filters with distributed cavity mode. Fabry-Pérot filters own a single cavity layer in the centre of the stack. In contrast, with chirped filter approach the cavity thickness is distributed over several layers. Model calculation results are applied to characterise the properties of the spectrum and the electric field of chirped filters. The aim of distributing the cavity within the filter stack is to distribute the electric field in the resonance case (transmission ...
Dissertation
Patent DE10 2004 037 519 B4 “Sensor Process and Device for Determining a Physical Value“. A Proof of Concept
(2010-06-11)
At present, a fraction of 0.1 - 0.2% of the patients undergoing surgery become aware during the process. The situation is referred to as anesthesia awareness and is obviously very traumatic for the person experiencing it. The reason for its occurrence is mostly an insufficient dosage of the narcotic Propofol combined with the incapability of the technology monitoring the depth of the patient’s anesthetic state to notice the patient becoming aware.
A solution can be a highly sensitive and selective real time monitoring ...
Dissertation
Large-Size AlGaN/GaN HEMT Large-Signal Electrothermal Characterization and Modeling for Wireless Digital Communications
(2012-03-29)
The rapid growth in high data rate communication systems has introduced new high spectral efficient modulation techniques and standards such as LTE-A (long term evolution-advanced) for 4G (4th generation) systems. These techniques have provided a broader bandwidth but introduced high peak-to-average power ratio (PAR) problem at the high power amplifier (HPA) level of the communication system base transceiver station (BTS). To avoid spectral spreading due to high PAR, stringent requirement on linearity is needed which ...
Dissertation
Optimization-Based Robotic Manipulation for Safe Interaction with Human Operators
(2014-05-02)
This thesis investigates a method for human-robot interaction (HRI) in order to uphold productivity of industrial robots like minimization of the shortest operation time, while ensuring human safety like collision avoidance. For solving such problems an online motion planning approach for robotic manipulators with HRI has been proposed. The approach is based on model predictive control (MPC) with embedded mixed integer programming.
The planning strategies of the robotic manipulators mainly considered in the thesis ...
Dissertation
Highly Sensitive Sensor Based On Intracavity Laser Absorption Spectroscopy By Means of Relative Intensity Noise
(2011-01-07)
This thesis concerns with the main aspects of medical trace molecules detection by means of intracavity laser absorption spectroscopy (ICLAS), namely with the equirements for highly sensitive, highly selective, low price, and compact size sensor. A novel two modes semiconductor laser sensor is demonstrated. Its operation principle is based on the competition between these two modes. The sensor sensitivity is improved when the sample is placed inside the two modes laser cavity, and the competition between the two modes ...
Dissertation
Digitale Analyse periodischer und transienter Messsignale anhand von Beispielen aus der optischen Präzisionsmesstechnik
(2018-07-26)
Optische 3D-Präzisionsmessverfahren, wie Weißlichtinterferometrie oder konfokale Mikroskopie, die eine Höhenauflösung bis in den Subnanometerbereich sowie sehr kurze Messzeiten von unter einer Sekunde erreichen, haben sich in den letzten Jahrzehnten in industriellen und wissenschaftlichen Anwendungen etabliert. Der aktuelle Trend in der Industrie ist die hundertprozentige Qualitätskontrolle. Schnell und kosteneffizient lässt sich dieses Ziel nur durch die Integration der Messsysteme direkt in den Fertigungsprozess ...